I am using AccessoryTrackingProvider from ARKit to get the transform of the PSVR2 controller via originFromAnchorTransform of the AccessoryAnchor. I also am trying to use AnchorEntity on the controller using RealityKit However, none of the three options for Accessory.LocationName, which should be used to define the AnchorEntity target, seem to match the position on the controller which is being sent from ARKit. The picture attached is showing two transforms: RealityKit - using .gripSurface to define the AnchoringComponent.Target.accesssory location. ARKit - using originFromAnchorTransform for AccessoryTrackingProvider. They are not aligned at the same point. As for the other options of Accessory.LocationName, using .aim is located at the tip of the controller and .grip is the same position as .gripSurface but with a different orientation. I am wondering why there is not an option for Accessory.LocationName that actually matches the transform captured by ARKit?

Hardware Specifications Regarding the LiDAR scanner in the iPhone 13/14/15/16/17 Pro series, could you please provide the following technical details for academic verification: Point Cloud Density / Resolution: The effective resolution of the depth map. Sampling Frequency: The sensor's refresh rate. Accuracy Metrics: Official tolerance levels regarding depth accuracy relative to distance (specifically within 0.5m – 2m range). Data Acquisition Methodology For a scientific thesis requiring high data integrity: Does Apple recommend a custom ARKit implementation over third-party applications (e.g., Polycam) to access raw depth data? I need to confirm if third-party apps typically apply smoothing or post-processing that would obscure the sensor's native performance, which must be avoided for my error analysis.

ARSession provides video stream from the wide angle camera. If ARSession uses the ultra wide camera at the same time, ARSession may provide video stream from that camera, otherwise AVCaptureSession with an ultra wide camera should be allowed to launch. It would be very very useful if we can access different cameras while ARSession is running. We'd like to cooperate with you if possible. Steps to reproduce: run an AVCaptureSession and then run an ARSession. The AVCaptureSession stops.

Dear Apple Team, I’m a high school student (vocational upper secondary school) working on my final research project about LiDAR sensors in smartphones, specifically Apple’s iPhone implementation. My current understanding (for context): I understand Apple’s LiDAR uses dToF with SPAD detectors: A VCSEL laser emits pulses, a DOE splits the beam into a dot pattern, and each spot’s return time is measured separately → point cloud generation. My specific questions: How many active projection dots does the LiDAR projector have in the iPhone 15 Pro vs. iPhone 12 Pro? Are the dots static or do they shift/move over time? How many depth measurement points does the system deliver internally (after processing)? What is the ranging accuracy (cm-level precision) of each measurement point? Experimental background: Using an IR night vision camera, I counted approximately 111 dots on the 15 Pro vs. 576 dots on the 12 Pro. Do these match the internal specifications? Photos of my measurements are available if helpful. Contact request: I would be very grateful if you could connect me with an Apple engineer or ARKit specialist who works with LiDAR technology. I would love to ask follow-up questions directly and would be happy to provide my contact details for this purpose. These specifications would be essential for my research paper. Thank you very much in advance! Best regards, Max! Vocational Upper Secondary School Hans-Leipelt-Schule Donauwörth Research Project: “LiDAR Sensor Technology in Smartphones”

Hi everyone! I am working on AR app and wanted to implement object occlusion because it removes drift pretty much from the object. This working great with RealityKit sample But I am unable to replicate such behaviour it with scenekit. Because scenekit does not offer object occlusion. Can we say scenekit is getting depricated, and we should re-write app in RealityKit (which is obviously a big task)?

What is the reason the hand-tracking joints have these axes? I'm trying to create a virtual hands model and that's a mess.

I’ve been having some issues removing anchors. I can add anchors with no issue. They will be there the next time I run the scene. I can also get updates when ARKit sends them. I can remove anchors, but not all the time. The method I’m using is to call removeAnchor() on the data provider. worldTracking.removeAnchor(forID: uuid) // Yes, I have also tried `removeAnchor(_ worldAnchor: WorldAnchor)` This works if there are more than one anchor in a scene. When I’m down to one remaining anchor, I can remove it. It seems to succeed (does not raise an error) but the next time I run the scene the removed anchor is back. This only happens when there is only one remaining anchor. do { // This always run, but it doesn't seem to "save" the removal when there is only one anchor left. try await worldTracking.removeAnchor(forID: uuid) } catch { // I have never seen this block fire! print("Failed to remove world anchor \(uuid) with error: \(error).") } I posted a video on my website if you want to see it happening. https://stepinto.vision/labs/lab-051-issues-with-world-tracking/ Here is the full code. Can you see if I’m doing something wrong? Is this a bug? struct Lab051: View { @State var session = ARKitSession() @State var worldTracking = WorldTrackingProvider() @State var worldAnchorEntities: [UUID: Entity] = [:] @State var placement = Entity() @State var subject : ModelEntity = { let subject = ModelEntity( mesh: .generateSphere(radius: 0.06), materials: [SimpleMaterial(color: .stepRed, isMetallic: false)]) subject.setPosition([0, 0, 0], relativeTo: nil) let collision = CollisionComponent(shapes: [.generateSphere(radius: 0.06)]) let input = InputTargetComponent() subject.components.set([collision, input]) return subject }() var body: some View { RealityView { content in guard let scene = try? await Entity(named: "WorldTracking", in: realityKitContentBundle) else { return } content.add(scene) if let placementEntity = scene.findEntity(named: "PlacementPreview") { placement = placementEntity } } update: { content in for (_, entity) in worldAnchorEntities { if !content.entities.contains(entity) { content.add(entity) } } } .modifier(DragGestureImproved()) .gesture(tapGesture) .task { try! await setupAndRunWorldTracking() } } var tapGesture: some Gesture { TapGesture() .targetedToAnyEntity() .onEnded { value in if value.entity.name == "PlacementPreview" { // If we tapped the placement preview cube, create an anchor Task { let anchor = WorldAnchor(originFromAnchorTransform: value.entity.transformMatrix(relativeTo: nil)) try await worldTracking.addAnchor(anchor) } } else { Task { // Get the UUID we stored on the entity let uuid = UUID(uuidString: value.entity.name) ?? UUID() do { try await worldTracking.removeAnchor(forID: uuid) } catch { print("Failed to remove world anchor \(uuid) with error: \(error).") } } } } } func setupAndRunWorldTracking() async throws { if WorldTrackingProvider.isSupported { do { try await session.run([worldTracking]) for await update in worldTracking.anchorUpdates { switch update.event { case .added: let subjectClone = subject.clone(recursive: true) subjectClone.isEnabled = true subjectClone.name = update.anchor.id.uuidString subjectClone.transform = Transform(matrix: update.anchor.originFromAnchorTransform) worldAnchorEntities[update.anchor.id] = subjectClone print("🟢 Anchor added \(update.anchor.id)") case .updated: guard let entity = worldAnchorEntities[update.anchor.id] else { print("No entity found to update for anchor \(update.anchor.id)") return } entity.transform = Transform(matrix: update.anchor.originFromAnchorTransform) print("🔵 Anchor updated \(update.anchor.id)") case .removed: worldAnchorEntities[update.anchor.id]?.removeFromParent() worldAnchorEntities.removeValue(forKey: update.anchor.id) print("🔴 Anchor removed \(update.anchor.id)") if let remainingAnchors = await worldTracking.allAnchors { print("Remaining Anchors: \(remainingAnchors.count)") } } } } catch { print("ARKit session error \(error)") } } } }