Hi everyone, I'm running into an issue with AVAudioRecorder when handling interruptions such as phone calls or alarms. Problem: When the app is recording audio and an interruption occurs: I handle the interruption with audioRecorder?.pause() inside AVAudioSession.interruptionNotification (on .began). On .ended, I check for .shouldResume and call audioRecorder?.record() again. The recorder resumes successfully, but only the audio recorded after the interruption is saved. The audio recorded before the interruption is lost, even though I'm using the same file URL and not recreating the recorder. Repro: Start a recording with AVAudioRecorder Simulate a system interruption (e.g., incoming call) Resume recording after the interruption Stop and inspect the output audio file Expected: Full audio (before and after interruption) should be saved. Actual: Only the audio after interruption is saved; the earlier part is missing Notes: According to the documentation, calling .record() after .pause() should resume recording into the same file. I confirmed that the file URL does not change, and I do not recreate the recorder instance. No error is thrown by the system during this process. This behavior happens consistently when the app is interrupted and resumed. Question: Is this a known issue? Is there a recommended workaround for preserving the full recording when interruptions happen? Thanks in advance!

I'm receiving output from avcapturesession and capturing an image using Vision, but the image is output in landscape orientation instead of portrait. Even when I set the orientation to up in ciimage, cgimage, and uiimage, the image is still output in landscape orientation. On iPhones 16 and below, the image is output in portrait orientation. But on iPhones 17 and above, the image is output in landscape orientation. Please help.

Hi, I would like to use macro-mode for the custom camera using AVCaptureDevice in my project. This feature might help to automatically adjust and switch between lenses to get a close up clear image. It looks like this feature is not available and there are no open apis to achieve macro mode from Apple. Is there a way to get this functionality in the custom camera without losing the image quality. Please let me know if this is possible. Thanks you, Adil Thamarasseri

Hello, We are trying to use the new Background Upload Extension to improve uploads of assets (Photos, Live Photos, Videos) in the background in our application. 1 - We implemented the code to upload still images. We would like to do the same for Live Photos but we are not sure how to proceed since a Live Photo is composed of 2 resources that we would like to upload in the same job so that we keep the association between the 2 resources. Steps: A Live Photo is captured on the device. Our application is notified for new content in the Photo Library and the asset is queued for upload by our application. The system calls the background upload extension and the Live Photo is prepared for upload but we can schedule a job only for one resource (still photo or paired video) so we can not upload both resources in a single job. 2 - Is there a way to synchronise the application and the extension so that the application would not process the same data or execute the same requests than the extension. For example: our application is working with tokens and we would like to prevent those tokens to be consumed by the application and the extension at the same time. 3 - is there a command in xcode or terminal to start or stop the extension, something similar to what exists for processing tasks (https://developer.apple.com/documentation/backgroundtasks/starting-and-terminating-tasks-during-development).

Hello, I'm investigating an issue with LL-HLS playback using AVPlayer, specifically during DVR Live seeking (seeking to a past time). I noticed that in certain seeking scenarios, AVPlayer sends a Blocking Playlist Reload request that includes the _HLS_msn parameter but is missing the _HLS_part parameter. While I understand this is compliant with the HLS spec, I would like to know the specific criteria AVPlayer uses to decide when to drop the _HLS_part parameter. Does AVPlayer intentionally omit the part info when it determines that loading a specific partial segment is unnecessary during a seek operation? Clarification on this behavior would help us greatly in debugging our stream delivery. Thanks in advance.

I noticed that Instagram and iMessage support receiving shared lyrics from Apple Music. Specifically, when users long-press lyrics, a sheet pops up showing iMessage and Instagram. Clicking on either app generates a beautifully formatted lyrics image. I've looked through MusicKit documentation but couldn't find any related APIs. How can I implement this functionality in my app?

Following WWDC 2023 "Support HDR images in your app", I'm trying to save 48-megapixel ProRAWs (taken on an iPhone 14 Pro Max) as HDR HEICs to the Photo Library. After processing the ProRAW file using CIRAWFilter, whether I use CIContext.heif10Representation() or convert to a CGImage, then UIImage, and use UIImage.heicData(), I get photos that behave oddly in the Photo Library. They appear too dark, and visibly brighten when first viewed, but more problematic is that the photos brighten a great deal more when you edit them with the Photos editor. This is the behavior when using the itur_2100_PQ color space, but itur_2100_HLG behaves similarly, except that it gets dramatically darker when edited. This behavior occurs whether CIRAWFilter.extendedDynamicRangeAmount is set to 0.0, or 2.0, or not set at all. So what am I doing wrong? Here is a minimal iOS app -- well, just the ContentView -- that demonstrates the issue. You also need a .dng ProRAW file included in the project directory named test.dng. I'd love to include such a file, but I can't. Be prepared for a multi-second wait when you save the photo. import SwiftUI import Photos struct ContentView: View { let context = CIContext() let hdrColorSpace = CGColorSpace(name: CGColorSpace.itur_2100_PQ)! var body: some View { VStack(spacing: 100) { Button("Save Photo From CGImage/UIImage") { savePhotoFromUIImage() } Button("Save Photo From CIImage") { savePhotoDirectFromCIImage() } }.padding(60) } //convert RAW with CIRAWFilter to CIImage, then convert to CGImage, then UIImage, then HEIF private func savePhotoFromUIImage() { if let ciImage = processRAW(url: Bundle.main.url(forResource:"test", withExtension: "dng")!) { guard let outputCGImage = context.createCGImage(ciImage, from: ciImage.extent, format: .RGB10, colorSpace: hdrColorSpace) else { return } let uiImage = UIImage(cgImage: outputCGImage) if let heicData = uiImage.heicData() { saveHEIFPhotoToLibrary(imageData: heicData) } else { print("Failed to convert UIImage to HEIC") } } } //convert RAW with CIRAWFilter to CIImage, then to HEIF private func savePhotoDirectFromCIImage() { if let ciImage = processRAW(url: Bundle.main.url(forResource:"test", withExtension: "dng")!) { do { let heif = try context.heif10Representation(of: ciImage, colorSpace: hdrColorSpace) saveHEIFPhotoToLibrary(imageData: heif) } catch { print("Failed to get HEIF representation from CIContext") } } } private func processRAW(url: URL) -> CIImage? { guard let coreRawFilter = CIRAWFilter(imageURL: url) else { return nil } coreRawFilter.extendedDynamicRangeAmount = 2.0 //the issue persists whether this is not set, or set to 0, or set to, say, 2.0 guard let ciImage = coreRawFilter.outputImage else { return nil } return ciImage } private func saveHEIFPhotoToLibrary(imageData: Data) { PHPhotoLibrary.shared().performChanges({ let creationRequest = PHAssetCreationRequest.forAsset() let options = PHAssetResourceCreationOptions() creationRequest.addResource(with: .photo, data: imageData, options: options) }) { success, error in if let error = error { print("Error saving photo: \(error.localizedDescription)") } else { print("Photo saved.") } } } }

HI Guys, I'm using Shazamkit in my IOS app and successfully capturing the currently playing track details, when using the devices (iPhone) built-in mic. When I test with AirPods though, my app cannot both send the output to through the AirPods and capture that same output with the AirPods mic, for Shazamkit recognition. I believe this must be possible, because the Shazamkit widget on IOS can do this. Is it restricted in some way for third party apps? If not, I'd appreciate some guidance on how to achieve this in Swift code. Thanks in advance.

I believe this should work: CFMutableDictionaryRef attrs = CFDictionaryCreateMutable(kCFAllocatorDefault, 0, &kCFTypeDictionaryKeyCallBacks, &kCFTypeDictionaryValueCallBacks); CFDictionaryAddValue(attrs, kCVImageBufferColorPrimariesKey, kCVImageBufferColorPrimaries_ITU_R_709_2); CFDictionaryAddValue(attrs, kCVImageBufferTransferFunctionKey, kCVImageBufferTransferFunction_ITU_R_709_2); CFDictionaryAddValue(attrs, kCVImageBufferYCbCrMatrixKey, kCVImageBufferYCbCrMatrix_ITU_R_709_2); CVPixelBufferRef pixelBuffer = NULL; CVPixelBufferCreate(kCFAllocatorDefault, width, height, kCVPixelFormatType_32ARGB, attrs, &pixelBuffer); assert(CFDictionaryGetCount(CVBufferGetAttachments(pixelBuffer, kCVAttachmentMode_ShouldPropagate)) > 0); But that last assert fails, so it appears the color info does not get attached. kCVImageBufferColorPrimariesKey and the others are not one of the keys listed under BufferAttributeKeys, but I think they're supposed to be allowed because they're listed by CMVideoFormatDescriptionGetExtensionKeysCommonWithImageBuffers(). I'm hoping that putting the color matrix info in there will control how AVAssetWriter converts the RGB to YCbCr.

I am developing an iOS application that supports screen mirroring to Google TV (or Chromecast with Google TV). My goal is to mirror the iPhone/iPad screen in real time to a Google TV device. What I Have Tried So Far I have explored multiple approaches but haven't found a direct way to achieve low-latency screen mirroring. Here are some of my findings: Google Cast SDK: Google Cast SDK is primarily designed for casting media (videos, images, audio) rather than real-time mirroring. It supports custom receiver applications, but there are no direct APIs for full screen mirroring. Casting a recorded video is possible, but it introduces latency and is not real-time. ReplayKit for Screen Capture: RPScreenRecorder.shared().startCapture(handler: ...) allows capturing the iPhone screen as a video stream. However, sending this stream to Google TV in real time is a challenge. I could potentially encode the video as HLS and stream it, but the delay is significant. RTSP/UDP Streaming: Some third-party libraries support RTSP/UDP streaming for real-time screen sharing. Google TV does not natively support RTSP, making this approach difficult. My Questions: Is it possible to achieve real-time screen mirroring on Google TV using Google Cast SDK? Does Google TV support WebRTC or any low-latency streaming protocol that can be used from iOS? Are there any alternative approaches to mirror an iOS screen to Google TV with minimal latency? I would appreciate any guidance, code examples, or references to relevant documentation.

Hi, I'm sending an API request to: https://api.music.apple.com/v1/me/library/playlists?limit=$limit&offset=$offset To list all of the users library playlists, however the resulting objects do not contain the playlist artwork in the JSON. I've tried adding the extend and include attributes as well but to no avail. A partial example of the response: {"id": PLAYLIST_ID, "type": "library-playlists", "href": "/v1/me/library/playlists/PLAYLIST_ID", "attributes": {"lastModifiedDate": "2024-09-18T20:18:24Z", "canEdit": true, "name": "Afro Party Anthems", "isPublic": false, "description": {"standard": "Definitive African party starters"}, "hasCatalog": false, "dateAdded": "2022-03-10T18:30:56Z", "playParams": {"id": PLAYLIST_ID, "kind": "playlist", "isLibrary": true}}, "relationships": {"catalog": {"href": "/v1/me/library/playlists/PLAYLIST_ID/catalog", "data": []}}} Is there a way to get the artwork URL without sending a request for each playlist? And if not can this be fixed?

I want to create a Live Photo. The project includes a .jpg image and a .mov video (2 seconds). I am sure they are correct. Two permissions in xcode have been added: Privacy - Photo Library Usage Description Privacy - Photo Library Additions Usage Description Simulate: iphone 16, ios 18.3 The codes in ContentView.swift : private func saveLivePhoto(imageURL: URL, videoURL: URL, completion: @escaping (Bool, Error?) -> Void) { PHPhotoLibrary.shared().performChanges { let creationRequest = PHAssetCreationRequest.forAsset() let options = PHAssetResourceCreationOptions() options.shouldMoveFile = false creationRequest.addResource(with: .photo, fileURL: imageURL, options: options) creationRequest.addResource(with: .pairedVideo, fileURL: videoURL, options: options) } completionHandler: { success, error in DispatchQueue.main.async { print(error) completion(success, error) } } } guard let imageURL = Bundle.main.url(forResource: "livephoto", withExtension: "jpeg"), let videoURL = Bundle.main.url(forResource: "livephoto", withExtension: "mov") else { showAlertMessage(title: "error", message: "cant find Live Photo ") return } print("imageURL: \(imageURL)") print("videoURL: \(videoURL)") saveLivePhoto(imageURL: imageURL, videoURL: videoURL) { success, error in if success { xxxxx } else { xxxxx } } Really need help, thanks

Safari is supposed to support animated AVIF images since version 16, but the ones I've tested perform very poorly, even on an M4 Mac Mini running Sequoia 15.1.1. I believe Safari delegates decoding to the operating system itself, so this issue also happens in Live Preview in the finder, when I try to preview a file. Sample file here: https://s3.us-west-2.amazonaws.com/cdn.paintera.org/test/sample.avif 322KB file, 5 seconds long, 12fps This plays perfectly on Chrome on Mac OS, but is slow and laggy on Safari and Live Preview (it takes about 6.5 seconds to finish the 5 second video). Does anyone know how to fix this or workaround this issue?

Dear Apple Developer Team, On iOS 26, the contents of PDF pages appear to be swapped. Could you please advise if there is a workaround or a planned fix for this issue? Steps to Reproduce: Download the attached PDF on iOS 26. Open the PDF in the Files app. Tap the PDF to view it in Quick Look. Navigate to page 5. Expected Result: The page number displayed at the bottom should be 5. Actual Result: The page number displayed at the bottom is 4. Issue: This is not limited to page 5—multiple page contents appear to be swapped. I have also submitted feedback via Feedback Assistant (FB20743531) on October 20. Best regards, Yoshihito Suezawa

I'm using the SwiftUI Photos Picker to select videos from the users Photos library and then opening the video using the PhotosPickerItem. I'm looking for a way to allow the user to open the same video on their other devices as the app uses SwiftData and CloudKit to provide access to a recently watched list of videos. The URL from the PhotosPickerItem appears to be device specific and so I was looking to see if I can use the itemIdentifier and then the init that takes the itemIdentifier to create the PhotosPickerItem on the other devices. The itemIdentifier however is always nil and so wouldn't be able to be used in this way. Is there an alternative approach whereby the users can open a video using a PhotosPickerItem and that item would be viewable on their other devices with an item identifier or a URL that is device agnostic. This approach should also not involve copying the video into other storage as it would simply expand the use of the users iCloud storage, providing a less than ideal user experience. If the user has opened the video from their Photos library, there should be a way to allow the same user (e.g. same Apple ID), to use the same app on another device to open the video again.

Hello! I've two mics connected to a USB-hub. The USB-hub is then connected to my iPad. Both mics are part of the audio session's list of available inputs. The problem is that regardless of which mic I select in my app (using setPreferredInput() on the audio session), the audio keeps coming from the mic that was last connected to the USB-hub. Anyone that knows if this is a limitation in iPadOS/iOS?

How does a third party developer go about supporting the new Enhanced Dialogue option for video apps in tvOS 18? If an app is using the standard AVPlayerViewController, I had assumed it would be a simple-ish matter of building against the tvOS 18 SDK but apparently not, the options don't appear, not even greyed out.

The presentation "create audio drivers with DriverKit" from WWDC 2021 demonstrates how to use a dext to implement a virtual audio driver. It also says " If a virtual audio driver or device is all that is needed, the audio server plug-in driver model should continue to be used". Indeed, in AudioDriverKit/AudioDriverKitTypes.h, there is no IOUserAudioTransportType Virtual, although CoreAudio/AudioHardwareBase.h includes kAudioDeviceTransportTypeVirtual. For one of our products, we require virtual devices to implement a software loopback "cable". We've implemented this using the "traditional" HAL plugin, and as a proof-of-concept, also using a dext. In the dext, I tried setting the transport type to 'virt', which seems to only have the effect of changing the icon shown in Audio Midi Setup. HAL plugins require an installer, and the installer has to kill coreaudiod in a post-install script. You have to turn off SIP to debug them. Just like AudioDriverKit drivers, they are out-of-process and run in a process not owned by the hosting app. Our HAL plugin's interface is property based; we had to write a lot of boiler-plate code to implement required properties. Writing an AudioDriverKit driver is in most respects easier - a lot of the scaffolding is implemented in the base driver, which we only alter where required. Debugging and installation is much easier. The dext works just fine, as far as we can ascertain, just as well as a HAL plugin. So, my question is - is the advice to use a HAL plugin for a virtual device still correct in 2025? And if so, what's the objection? We'd really prefer to ship the AudioDriverKit virtual audio device.

Hey, I have a camera app that captures a ProRaw photo and then runs a few Core Image filters before saving it to the device as a HEIC. However I'm finding that capturing at 48MP is rather slow. Testing a minimal pipeline on an iPhone 16 Pro: Shutter press => file received in output: 1.2 ~ 1.6s CIRawFilter created using photo file representation then rendered to context, without any filters: 0.8s ~ 1s Saving to device ~0.15s Is this the expected time for capturing processing? The native camera app seems to save the images within half a second. I'm using QualityPrioritization.balanced and the highest resolution available which is 48MP. Would using the CIRawFilter with the pixelBuffer from the photo output be faster? I tried it but couldn't get it to output an image. Are there any other things I could try to speed this up? Is it possible to capture at 24MP instead? Thanks, Alex

We're distributing a virtual camera with our app that does not profit in the slightest from automatically applied system video effects both to the video going in (physical camera device) or out (virtual camera device). I'm aware of setting NSCameraReactionEffectGesturesEnabledDefault in Info.plist and determining active video effects via AVCaptureDevice API. Those are obviously crutches, because having to tell users to go look for and click around in menu bar apps is the opposite of a great UX. To make our product's video output more deterministic, I'm looking for a way to tell the CMIO subsystem that our virtual camera does not support any of the system video effects. I'm seeing properties like AVCaptureDevice.Format.isPortraitEffectSupported and AVCaptureDevice.Format.isStudioLightSupported whose documentation refers to the format's ability to support these effects. Since we're setting a CMFormatDescription via CMIOExtensionStreamSource.formats I was hoping to find something in the extensions, but wasn't successful so far. Can this be done?