Please Update Andorid MusicKit，the version 1.1.2 will complied fail。the error msg：•SDKUriHandlerActivity>. Apps targeting Android 12 and higher are required to specify an explicit value for android:exported when the corres

I’ve tried both AVCaptureVideoDataOutputSampleBufferDelegate (captureOutput) and AVCaptureDataOutputSynchronizerDelegate (dataOutputSynchronizer), but the number of depth frames and saved timestamps is significantly lower than the number of frames in the .mp4 file written by AVAssetWriter. In my code, I save: Timestamps for each frame to a metadata file Depth frames to a binary file Video to an .mp4 file If I record a 4-second video at 30fps, the .mp4 file correctly plays for 4 seconds, but the number of stored timestamps and depth frames is much lower—around 70 frames instead of the expected 120. Does anyone know why this mismatch happens? func dataOutputSynchronizer(_ synchronizer: AVCaptureDataOutputSynchronizer, didOutput synchronizedDataCollection: AVCaptureSynchronizedDataCollection) { // Read all outputs guard let syncedDepthData: AVCaptureSynchronizedDepthData = synchronizedDataCollection.synchronizedData(for: depthDataOutput) as? AVCaptureSynchronizedDepthData, let syncedVideoData: AVCaptureSynchronizedSampleBufferData = synchronizedDataCollection.synchronizedData(for: videoDataOutput) as? AVCaptureSynchronizedSampleBufferData else { // only work on synced pairs return } if syncedDepthData.depthDataWasDropped || syncedVideoData.sampleBufferWasDropped { return } let depthData = syncedDepthData.depthData let depthPixelBuffer = depthData.depthDataMap let sampleBuffer = syncedVideoData.sampleBuffer guard let videoPixelBuffer = CMSampleBufferGetImageBuffer(sampleBuffer), let formatDescription = CMSampleBufferGetFormatDescription(sampleBuffer) else { return } addToPreviewStream?(CIImage(cvPixelBuffer: videoPixelBuffer)) if !canWrite() { return } // Extract the presentation timestamp (PTS) from the sample buffer let timestamp = CMSampleBufferGetPresentationTimeStamp(sampleBuffer) //sessionAtSourceTime is the first buffer we will write to the file if self.sessionAtSourceTime == nil { //Make sure we don't start recording until the buffer reaches the correct time (buffer is always behind, this will fix the difference in time) guard sampleBuffer.presentationTimeStamp >= self.recordFromTime! else { return } self.sessionAtSourceTime = sampleBuffer.presentationTimeStamp self.videoWriter!.startSession(atSourceTime: sampleBuffer.presentationTimeStamp) } if self.videoWriterInput!.isReadyForMoreMediaData { self.videoWriterInput!.append(sampleBuffer) self.videoTimestamps.append( Timestamp( frame: videoTimestamps.count, value: timestamp.value, timescale: timestamp.timescale ) ) let ddm = depthData.depthDataMap depthCapture.addDepthData(pixelBuffer: ddm, timestamp: timestamp) } }

I'm encountering errors while using AVAudioEngine with voice processing enabled (setVoiceProcessingEnabled(true)) in scenarios where the input and output audio devices are not the same. This issue arises specifically with mismatched devices, preventing the application from functioning as expected. Works: Paired devices (e.g., MacBook Pro mic → MacBook Pro speakers) Fails: Mismatched devices (e.g., AirPods mic → MacBook Pro speakers) When using paired input and output devices: The setup works as expected. Example: MacBook Pro microphone → MacBook Pro speakers. When using mismatched devices: AVAudioEngine setup fails during aggregate device construction. Example: AirPods microphone → MacBook Pro speakers. Error logs indicate a channel count mismatch. Here are the partial logs. Due to the content limit, I cannot post the entire logs. AUVPAggregate.cpp:1000 client-side input and output formats do not match (err=-10875) AUVPAggregate.cpp:1036 err=-10875 AVAEInternal.h:109 [AVAudioEngineGraph.mm:1344:Initialize: (err = PerformCommand(*outputNode, kAUInitialize, NULL, 0)): error -10875 AggregateDevice.mm:329 Failed expectation of constructed aggregate (312): mInput.streamChannelCounts == inputStreamChannelCounts AggregateDevice.mm:331 Failed expectation of constructed aggregate (312): mInput.totalChannelCount == std::accumulate(inputStreamChannelCounts.begin(), inputStreamChannelCounts.end(), 0U) AggregateDevice.mm:182 error fetching default pair AggregateDevice.mm:329 Failed expectation of constructed aggregate (336): mInput.streamChannelCounts == inputStreamChannelCounts AggregateDevice.mm:331 Failed expectation of constructed aggregate (336): mInput.totalChannelCount == std::accumulate(inputStreamChannelCounts.begin(), inputStreamChannelCounts.end(), 0U) AUHAL.cpp:1782 ca_verify_noerr: [AudioDeviceSetProperty(mDeviceID, NULL, 0, isInput, kAudioDevicePropertyIOProcStreamUsage, theSize, theStreamUsage), 560227702] AudioHardware-mac-imp.cpp:3484 AudioDeviceSetProperty: no device with given ID AUHAL.cpp:1782 ca_verify_noerr: [AudioDeviceSetProperty(mDeviceID, NULL, 0, isInput, kAudioDevicePropertyIOProcStreamUsage, theSize, theStreamUsage), 560227702] AggregateDevice.mm:182 error fetching default pair AggregateDevice.mm:329 Failed expectation of constructed aggregate (348): mInput.streamChannelCounts == inputStreamChannelCounts AggregateDevice.mm:331 Failed expectation of constructed aggregate (348): mInput.totalChannelCount == std::accumulate(inputStreamChannelCounts.begin(), inputStreamChannelCounts.end(), 0U) Is it possible to use voice processing with different input/output devices? If yes, are there any specific configurations required to handle mismatched devices? How can we resolve channel count mismatch errors during aggregate device construction? Are there settings or API adjustments to enforce compatibility between input/output devices? Are there any workarounds or alternative approaches to achieve voice processing functionality with mismatched devices? For instance, can we force an intermediate channel configuration or downmix input/output formats?

Hello everyone, I'm working on a feature where I need to capture the highest possible quality photo (e.g., 24MP on supported devices) and upload it to our server. I don't need the photos to appear in user's main Photos app so I thought I could store the photos in app's private directory using FileManager until they are uploaded. This wouldn't require requesting Photo Library permission, maximizing user privacy. The documentation on AVCapturePhotoOutput states that "the 24MP setting (5712, 4284) is only serviced as 24MP when opted-in to autoDeferredPhotoDeliveryEnabled" /** @property maxPhotoDimensions @abstract Indicates the maximum resolution of the requested photo. @discussion Set this property to enable requesting of images up to as large as the specified dimensions. Images returned by AVCapturePhotoOutput may be smaller than these dimensions but will never be larger. Once set, images can be requested with any valid maximum photo dimensions by setting AVCapturePhotoSettings.maxPhotoDimensions on a per photo basis. The dimensions set must match one of the dimensions returned by AVCaptureDeviceFormat.supportedMaxPhotoDimensions for the current active format. Changing this property may trigger a lengthy reconfiguration of the capture render pipeline so it is recommended that this is set before calling -[AVCaptureSession startRunning]. Note: When supported, the 24MP setting (5712, 4284) is only serviced as 24MP when opted-in to autoDeferredPhotoDeliveryEnabled. */ @available(iOS 16.0, *) open var maxPhotoDimensions: CMVideoDimensions (btw. this note is not present in the docs https://developer.apple.com/documentation/avfoundation/avcapturephotooutput/maxphotodimensions) Enabling autoDeferredPhotoDeliveryEnabled means that for a 24MP capture, the system will call the photoOutput(_:didFinishCapturingDeferredPhotoProxy:error:) delegate method, providing a proxy object instead of the final image data. According to the WWDC23 session "Create a more responsive camera experience," this AVCaptureDeferredPhotoProxy must be saved to the PHPhotoLibrary using a PHAssetCreationRequest with the resource type .photoProxy. The system then handles the final processing in the background within the library. To use deferred photo processing, you'll need to have write permission to the photo library to store the proxy photo, and read permission if your app needs to show the final photo or wants to modify it in any way. https://developer.apple.com/videos/play/wwdc2023/10105/?time=799 This seems to create a hard dependency on the Photo Library for accessing 24MP images. My question is: Is there any way to receive the final, processed 24MP image data directly in the app after a deferred capture, without using PHPhotoLibrary as the processing intermediary? For example, is there a delegate callback or a mechanism I'm missing that provides the final data for a deferred photo, allowing an app to handle it in-memory or in its own private sandbox, completely bypassing the user's Photo Library? Our goal is to follow Apple's privacy-first principles by avoiding requesting a PHPhotoLibrary authorization when our app's core function doesn't require access to the user's photo collection. Thank you for your time and any clarification you can provide.

Hi, I have just implemented an Audio Unit v3 host. AgsAudioUnitPlugin *audio_unit_plugin; AVAudioUnitComponentManager *audio_unit_component_manager; NSArray<AVAudioUnitComponent *> *av_component_arr; AudioComponentDescription description; guint i, i_stop; if(!AGS_AUDIO_UNIT_MANAGER(audio_unit_manager)){ return; } audio_unit_component_manager = [AVAudioUnitComponentManager sharedAudioUnitComponentManager]; /* effects */ description = (AudioComponentDescription) {0,}; description.componentType = kAudioUnitType_Effect; av_component_arr = [audio_unit_component_manager componentsMatchingDescription:description]; i_stop = [av_component_arr count]; for(i = 0; i < i_stop; i++){ ags_audio_unit_manager_load_component(audio_unit_manager, (gpointer) av_component_arr[i]); } /* instruments */ description = (AudioComponentDescription) {0,}; description.componentType = kAudioUnitType_MusicDevice; av_component_arr = [audio_unit_component_manager componentsMatchingDescription:description]; i_stop = [av_component_arr count]; for(i = 0; i < i_stop; i++){ ags_audio_unit_manager_load_component(audio_unit_manager, (gpointer) av_component_arr[i]); } But this doesn't show me Audio Unit v2 plugins, why? regards, Joël

I use the iTunes Library framework in one of my apps, starting with macOS Sequoia 15.1 i can't create the ITLibrary object anymore with the following error: Connection to amplibraryd was interrupted. clientName:iTunesLibrary(ITLibraryLoader) Error connecting to the server via proxy object Error Domain=NSCocoaErrorDomain Code=4097 "connection to service named com.apple.amp.library.framework" UserInfo={NSDebugDescription=connection to service named com.apple.amp.library.framework} configure failed: Error Domain=NSCocoaErrorDomain Code=4097 "connection to service named com.apple.amp.library.framework" UserInfo={NSDebugDescription=connection to service named com.apple.amp.library.framework} I created a new sandboxed macOS app, added the music folder read permission and it reproduced the error: import SwiftUI import iTunesLibrary @main struct ITLibraryLoaderApp: App { var body: some Scene { WindowGroup { ContentView() } } } struct ContentView: View { var body: some View { Button("Load ITLibrary") { loadLibrary() } } func loadLibrary() { do { let _ = try ITLibrary(apiVersion: "1.0", options: .none) } catch { print(error) } } } I restarted my developer machine and the music app with no luck.

I have an HDR10+ encoded video that if loaded as a mov plays back on the Apple Vision Pro but when that video is encoded using the latest (1.23b) Apple HLS tools to generate an fMP4 - the resulting m3u8 cannot be played back in the Apple Vision Pro and I only get back a "Cannot Open" error. To generate the m3u8, I'm just calling mediafilesegmenter (with -iso-fragmented) and then variantplaylistcreator. This completes with no errors but the m3u8 will playback on the Mac using VLC but not on the Apple Vision Pro. The relevant part of the m3u8 is: #EXT-X-STREAM-INF:AVERAGE-BANDWIDTH=40022507,BANDWIDTH=48883974,VIDEO-RANGE=PQ,CODECS="ec-3,hvc1.1.60000000.L180.B0",RESOLUTION=4096x4096,FRAME-RATE=24.000,CLOSED-CAPTIONS=NONE,AUDIO="audio1",REQ-VIDEO-LAYOUT="CH-STEREO" {{url}} Has anyone been able to use the HLS tools to generate fMP4s of MV-HEVC videos with HDR10?

Please include the line below in follow-up emails for this request. Case-ID: 11089799 When using AVSpeechUtterance and setting it to play in Mandarin, if Siri is set to Cantonese on iOS 18, it will be played in Cantonese. There is no such issue on iOS 17 and 16. 1.let utterance = AVSpeechUtterance(string: textView.text) let voice = AVSpeechSynthesisVoice(language: "zh-CN") utterance.voice = voice 2.In the phone settings, Siri is set to Cantonese

Because I want to control the grid size and number of HEIC images myself, I decided to perform HEVC encoding manually and then generate the HEIC image. Previously, I used VTCompressionSession to accomplish this task, and the results were satisfactory. It worked perfectly on iOS 16 through iOS 18 — in other words, it was able to generate correct HEVC encoding, and its CMFormatDescription should also have been correct, since I relied on it to generate the decoderConfig; otherwise, the final image would have decoding issues. However, it can no longer generate a valid HEIC image on a physical device running iOS 26. Interestingly, it still works fine on the iOS 26 simulator — it only fails on real hardware. The abnormal result is that the image becomes completely black, although the image dimensions are still correct. After my troubleshooting, I suspect that the encoding behavior of VTCompressionSession has been modified on iOS 26, which causes the final hvc1 encoding I pass in to be incorrect. I created a VTCompressionSession using the following configuration. var newSession: VTCompressionSession! var status = VTCompressionSessionCreate( allocator: kCFAllocatorDefault, width: Int32(frameSize.width), height: Int32(frameSize.height), codecType: kCMVideoCodecType_HEVC, encoderSpecification: nil, imageBufferAttributes: nil, compressedDataAllocator: nil, outputCallback: nil, refcon: nil, compressionSessionOut: &newSession ) try check(status, VideoToolboxErrorDomain) let properties: [CFString: Any] = [ kVTCompressionPropertyKey_AllowFrameReordering: false, kVTCompressionPropertyKey_AllowTemporalCompression: false, kVTCompressionPropertyKey_RealTime: false, kVTCompressionPropertyKey_MaximizePowerEfficiency: false, kVTCompressionPropertyKey_ProfileLevel: profileLevel, kVTCompressionPropertyKey_Quality: quality.rawValue, ] status = VTSessionSetProperties(newSession, propertyDictionary: properties as CFDictionary) try check(status, VideoToolboxErrorDomain) { VTCompressionSessionInvalidate(newSession) } Then use the following code to encode each Grid of the image. let status = VTCompressionSessionEncodeFrame( session, imageBuffer: buffer, presentationTimeStamp: presentationTimeStamp, duration: frameDuration, frameProperties: nil, infoFlagsOut: nil) { [weak self] status, _, sampleBuffer in try check(status, VideoToolboxErrorDomain) if let sampleBuffer { let encodedImage = try self.encodedImage(from: sampleBuffer) // handle encodedImage } } try check(status, VideoToolboxErrorDomain) If I try to display this abnormal image in the App, my console outputs the following error, so it can be inferred that the issue probably occurred during decoding. createImageBlock:3029: *** ERROR: CGImageBlockCreate {0, 0, 2316, 6176} - data is NULL callDecodeImage:2411: *** ERROR: decodeImageImp failed - NULL _blockArray createImageBlock:3029: *** ERROR: CGImageBlockCreate {0, 0, 2316, 6176} - data is NULL callDecodeImage:2411: *** ERROR: decodeImageImp failed - NULL _blockArray createImageBlock:3029: *** ERROR: CGImageBlockCreate {0, 0, 2316, 6176} - data is NULL callDecodeImage:2411: *** ERROR: decodeImageImp failed - NULL _blockArray It needs to be emphasized again that this code used to work fine in the past, and the issue only occurs on an iOS 26 physical device. I noticed that iOS 26 has introduced many new properties, but I’m not sure whether some of these new properties must be set in the new system, and there’s no information about this in the official documentation.

i have a CarPlay implementation eand I want to show previous/next track button on player UI MPRemoteCommandCenter.shared().seekForwardCommand.isEnabled = false MPRemoteCommandCenter.shared().seekBackwardCommand.isEnabled = false MPRemoteCommandCenter.shared().previousTrackCommand.isEnabled = true MPRemoteCommandCenter.shared().nextTrackCommand.isEnabled = true It works correctly on CarPlay simulator , but on some car only SEEK button are shown . I have to suppose that it is that a problem on the car side , but I would ask about your opinion , maybe there is some pieces I'm missing

I am using Apple's original Lightning Digital AV-adapter (Lightning-to-HDMI dongle) to connect my iPhone to an external display via a HDMI cable. I need to synchronize rendering with the external display's refresh rate, so I create a new CADisplayLink tied to the external display's UIScreen: UIScreen.screens[externalDisplayIdx].displayLink(withTarget:, selector:). The callback is being called regularly, but with increasing delay relative to the CADisplayLink.timestamp, so the next time the callback is called, I have less and less time to draw the next frame (see the snippet below). Assuming 60 FPS, the value of secondsTillDeadline starts at an arbitrary value in the range of approx -0.0001 to 0.0166667, and then it slowly decreases towards zero (and for a brief period it goes into small negative numbers). Once it reaches zero, it flips back to 0.0166667 and continues to decrease again. This cycle repeats indefinitely. Changing the external display's resolution (UIScreen's mode) or the CADisplayLink's preferredFrameRateRange to a lower FPS does not seem to have any effect on the temporal drifting (even the rate of change seem to be the same). When I create a new CADisplayLink for the iPhone's main screen, the value of secondsTillDeadline is stable, it does not drift and it is very close to 0.0166667, as expected. Is this drift caused by the external monitor or by Apple's Lightning-to-HDMI dongle ...or is the problem somewhere else? Can the drifting be stopped? func onDisplayLinkUpdate(displayLink: CADisplayLink) { // Gradually decreases from 0.01667 to -0.0001, then flips back to 0.01667 and continues to decrease let secondsTillDeadline = displayLink.targetTimestamp - CACurrentMediaTime() }

Hi, I just started to develop audio unit hosting support in my application. Offline rendering seems to work except that I hear no output, but why? I suspect with the player goes something wrong. I connect to CoreAudio in a different location in the code. Here are some error messages I faced so far: 2025-08-14 19:42:04.132930+0200 com.gsequencer.GSequencer[34358:18611871] [avae] AVAudioEngineGraph.mm:4668 Can't retrieve source node to play sequence because there is no output node! 2025-08-14 19:42:04.151171+0200 com.gsequencer.GSequencer[34358:18611871] [avae] AVAudioEngineGraph.mm:4668 Can't retrieve source node to play sequence because there is no output node! 2025-08-14 19:43:08.344530+0200 com.gsequencer.GSequencer[34358:18614927] AUAudioUnit.mm:1417 Cannot set maximumFramesToRender while render resources allocated. 2025-08-14 19:43:08.346583+0200 com.gsequencer.GSequencer[34358:18614927] [avae] AVAEInternal.h:104 [AVAudioSequencer.mm:121:-[AVAudioSequencer(AVAudioSequencer_Player) startAndReturnError:]: (impl->Start()): error -10852 ** (<unknown>:34358): WARNING **: 19:43:08.346: error during audio sequencer start - -10852 I have implemented an AVAudioEngine based AudioUnit host. Here I instantiate player and effect: /* audio engine */ audio_engine = [[AVAudioEngine alloc] init]; fx_audio_unit_audio->audio_engine = (gpointer) audio_engine; av_format = (AVAudioFormat *) fx_audio_unit_audio->av_format; /* av audio player node */ av_audio_player_node = [[AVAudioPlayerNode alloc] init]; /* av audio unit */ av_audio_unit_effect = [[AVAudioUnitEffect alloc] initWithAudioComponentDescription:[((AVAudioUnitComponent *) AGS_AUDIO_UNIT_PLUGIN(base_plugin)->component) audioComponentDescription]]; av_audio_unit = (AVAudioUnit *) av_audio_unit_effect; fx_audio_unit_audio->av_audio_unit = av_audio_unit; /* audio sequencer */ av_audio_sequencer = [[AVAudioSequencer alloc] initWithAudioEngine:audio_engine]; fx_audio_unit_audio->av_audio_sequencer = (gpointer) av_audio_sequencer; /* output node */ [[AVAudioOutputNode alloc] init]; /* audio player and audio unit */ [audio_engine attachNode:av_audio_player_node]; [audio_engine attachNode:av_audio_unit]; [audio_engine connect:av_audio_player_node to:av_audio_unit format:av_format]; [audio_engine connect:av_audio_unit to:[audio_engine outputNode] format:av_format]; ns_error = NULL; [audio_engine enableManualRenderingMode:AVAudioEngineManualRenderingModeOffline format:av_format maximumFrameCount:buffer_size error:&ns_error]; if(ns_error != NULL && [ns_error code] != noErr){ g_warning("enable manual rendering mode error - %d", [ns_error code]); } ns_error = NULL; [[av_audio_unit AUAudioUnit] allocateRenderResourcesAndReturnError:&ns_error]; if(ns_error != NULL && [ns_error code] != noErr){ g_warning("Audio Unit allocate render resources returned error - ErrorCode %d", [ns_error code]); } Then I render in a dedicated thread. ns_error = NULL; [audio_engine startAndReturnError:&ns_error]; if(ns_error != NULL && [ns_error code] != noErr){ g_warning("error during audio engine start - %d", [ns_error code]); } [av_audio_sequencer prepareToPlay]; ns_error = NULL; [av_audio_sequencer startAndReturnError:&ns_error]; if(ns_error != NULL && [ns_error code] != noErr){ g_warning("error during audio sequencer start - %d", [ns_error code]); } [av_audio_player_node play]; while(is_running){ /* pre sync */ /* IO buffers */ av_output_buffer = (AVAudioPCMBuffer *) scope_data->av_output_buffer; av_input_buffer = (AVAudioPCMBuffer *) scope_data->av_input_buffer; /* fill input buffer */ /* schedule av input buffer */ frame_position = 0; // (gint64) ((note_offset * absolute_delay) + delay_counter) * buffer_size; av_audio_player_node = (AVAudioPlayerNode *) fx_audio_unit_audio->av_audio_player_node; AVAudioTime *av_audio_time = [[AVAudioTime alloc] initWithHostTime:frame_position sampleTime:frame_position atRate:((double) samplerate)]; [av_audio_player_node scheduleBuffer:av_input_buffer atTime:av_audio_time options:0 completionHandler:nil]; /* render */ ns_error = NULL; status = [audio_engine renderOffline:AGS_FX_AUDIO_UNIT_AUDIO_FIXED_BUFFER_SIZE toBuffer:av_output_buffer error:&ns_error]; if(ns_error != NULL && [ns_error code] != noErr){ g_warning("render offline error - %d", [ns_error code]); } } regards, Joël

Hi all, I have been quite stumped on this behavior for a little bit now, so thought it best to share here and see if someone more experience with AVAudioEngine / AVAudioSession can weigh in. Right now I have a AVAudioEngine that I am using to perform some voice chat with and give buffers to play. This works perfectly until route changes start to occur, which causes the AVAudioEngine to reset itself, which then causes all players attached to this engine to be stopped. Once a AVPlayerNode gets stopped due to this (but also any other time), all samples that were scheduled to be played then get purged. Where this becomes confusing for me is the completion handler gets called every time regardless of the sound actually being played. Is there a reliable way to know if a sample needs to be rescheduled after a player has been reset? I am not quite sure in my case what my observer of AVAudioEngineConfigurationChange needs to be doing, as this engine only handles output. All input is through a separate engine for simplicity. Currently I am storing a queue of samples as they get sent to the AVPlayerNode for playback, and after that completion checking if the player isPlaying or not. If it's playing I assume that the sound actually was played- and if not then I leave it in the queue and assume that an observer on the route change or the configuration change will realize there are samples in the queue and reset them Thanks for any feedback!

We move to another streaming service and need to deliver a ASK, .PEM &amp;key, and CRT to enable DRM. Now the issue is that we don't have that information anymore. Most logical would be to revoke the current certificate and create a new one. Unfortunately for Fairplay Streaming Certificates there is no revoke button. We asked developer support who isn't able to help. We then did a request to revoke as described in article 2.7 of the Apple Developer Program License Agreement. They can only do this when the certificate is compromised. So now we are stuck. Anyone out there who had the same issue and found a solution? Your help is much appreciated.

I'm working on an application that uses the iPhone camera for scientific purposes - and, as a result would like to receive video in as unprocessed format as possible. In particular, I'm interested in getting pixel buffers that contain pretty much the bayer data as the sensor sees it - with the minimum processing of color possible. Currently we configure the AVCaptureDevice to fix the focus and exposure, use a low ISO with no gain and set the white balance gains to 1. AVCaptureVideoDataOutput is using 32BGRA. What I'd like to do is remove any additional color and brightness processing such that the data is effectively processed with a linear transfer function (i.e. gamma function is 1). I thought that this might be down to using the AVCaptureDevice activeColorSpace - we currently use P3_D65 for this. But there only seems to be a few choices (e.g. sRGB, HLG_BT2020) all of which I think affect the gamma. So: is it possible to control or specify the gamma / transfer function when using CaptureVideoDelegate? if not, does one of the color space settings have a defined gamma function that I can effectively reverse it from the pixel data without losing too much information? or is there a better way to capture video-ish speed images (15-30fps) from the camera sensor that skips processing like this? Many thanks for any suggestions.

I started playing which transcription of audio files on macOS today, latest beta of Xcode and latest beta of Tahoe. Transcription itself works really well, but for some reason the majority of the results contain no audioTimeRange. I got 22 single-word results with time ranges, spread out all over total file of 53 minutes. Is there something I can do to improve this? To my understanding, I have followed sample code and instructions very closely, but the SwiftTranscriptionSampleApp and other examples I've seen lead me to believe I should be getting a lot more time ranges than I actually do.

I'm working on an app where a user needs to select a video from their Photos library, and I need to get the original, unmodified HEVC (H.265) data stream to preserve its encoding. The Problem I have confirmed that my source videos are HEVC. I can record a new video with my iPhone 15 Pro Max camera set to "High Efficiency," export the "Unmodified Original" from Photos on my Mac, and verify that the codec is MPEG-H Part2/HEVC (H.265). However, when I select that exact same video in my app using PHPickerViewController, the itemProvider does not list public.hevc as an available type identifier. This forces me to fall back to a generic movie type, which results in the system providing me with a transcoded H.264 version of the video. Here is the debug output from my app after selecting a known HEVC video: ⚠️ 'public.hevc' not found. Falling back to generic movie type (likely H.264). What I've Tried My code explicitly checks for the public.hevc identifier in the registeredTypeIdentifiers array. Since it's not found, my HEVC-specific logic is never triggered. Here is a minimal version of my PHPickerViewControllerDelegate implementation: import UniformTypeIdentifiers // ... inside the Coordinator class ... func picker(_ picker: PHPickerViewController, didFinishPicking results: [PHPickerResult]) { picker.dismiss(animated: true) guard let result = results.first else { return } let itemProvider = result.itemProvider let hevcIdentifier = "public.hevc" let identifiers = itemProvider.registeredTypeIdentifiers print("Available formats from itemProvider: \(identifiers)") if identifiers.contains(hevcIdentifier) { print("✅ HEVC format found, requesting raw data...") itemProvider.loadDataRepresentation(forTypeIdentifier: hevcIdentifier) { (data, error) in // ... process H.265 data ... } } else { print("⚠️ 'public.hevc' not found. Falling back to generic movie type (likely H.264).") itemProvider.loadFileRepresentation(forTypeIdentifier: UTType.movie.identifier) { url, error in // ... process H.264 fallback ... } } } My Environment Device: iPhone 15 Pro Max iOS Version: iOS 18.5 Xcode Version: 16.2 My Questions Are there specific conditions (e.g., the video being HDR/Dolby Vision, Cinematic, or stored in iCloud) under which PHPickerViewController's itemProvider would intentionally not offer the public.hevc type identifier, even for an HEVC video? What is the definitive, recommended API sequence to guarantee that I receive the original, unmodified data stream for a video asset, ensuring that no transcoding to H.264 occurs during the process? Any insight into why public.hevc might be missing from the registeredTypeIdentifiers for a known HEVC asset would be greatly appreciated. Thank you.

AVCaptureSession's startRunning method is thread blocking and seems to be slow. What is this method doing behind the scenes? For context: I'm working on Simulator Camera support and I have a 'fake' AVCaptureDevice that might be causing this. My hypothesis is that AVCaptureSession tries to connect to the device and waits for a notification to be posted back. I'd love to find a way to let my fake device message AVCaptureSession that it's connected.

I have an SCStreamDelegate for capturing frames from applications. On recent point releases of macOS Sonoma, I've noticed that the stream is being cancelled with no user action being taken. I started trying to debug it and when my on error method is called, the error parameter being passed is null: func stream(_ stream: SCStream, didStopWithError error: Error) { /*debugger shows this and segfaults if I try to print "\(error)" error (Error) > error = (Builtin.RawPointer) 0x0 */ From what I can tell, error should be a valid NSError so I can check the error code, based on similar code I've seen in, for example OBS (https://github.com/obsproject/obs-studio/blob/265239d4174f8d291b0de437088c5b78f8e27687/plugins/mac-capture/mac-sck-common.m#L29) Usually when this happens, the menubar icon for screen sharing (where I would click to change sharing window, etc) stays there even after my app has closed an no apps are doing sharing stuff. Has anyone come across this before? Am I misinterpreting what the debugger is saying about the error parameter? I'm running macos 14.7.3, but I just updated from 14.7.2 earlier and had basically the same issue on both macos versions

We are using a VoiceProcessingIO audio unit in our VoIP application on Mac. In certain scenarios, the AudioComponentInstanceNew call blocks for up to five seconds (at least two). We are using the following code to initialize the audio unit: OSStatus status; AudioComponentDescription desc; AudioComponent inputComponent; desc.componentType = kAudioUnitType_Output; desc.componentSubType = kAudioUnitSubType_VoiceProcessingIO; desc.componentFlags = 0; desc.componentFlagsMask = 0; desc.componentManufacturer = kAudioUnitManufacturer_Apple; inputComponent = AudioComponentFindNext(NULL, &desc); status = AudioComponentInstanceNew(inputComponent, &unit); We are having the issue with current MacOS versions on a host of different Macs (x86 and x64 alike). It takes two to three seconds until AudioComponentInstanceNew returns. We also see the following errors in the log multiple times: AUVPAggregate.cpp:2560 AggInpStreamsChanged wait failed and those right after (which I don't know if they matter to this issue): KeystrokeSuppressorCore.cpp:44 ERROR: KeystrokeSuppressor initialization was unsuccessful. Invalid or no plist was provided. AU will be bypassed. vpStrategyManager.mm:486 Error code 2003332927 reported at GetPropertyInfo