I found that the aggregated device correctly obtains input channels in the standard microphone mode. However, in voice isolation mode, it only retrieves channels from the first sub-device in the aggregated device's list. If I want to properly obtain channel information in voice isolation mode, how should I do it?

It sounds simple but searching for the name "Favorite Songs" is a non-starter because it's called different names in different countries, even if I specify "&l=en_us" on the query. So is there another property, relationship or combination thereof which I can use to tell me when I've found the right playlist? Properties I've looked at so far: canEdit: will always be false so narrows things down a little inFavorites: not helpful as it depends on whether the user has favourite the favourites playlist, so not relevant hasCatalog: seems always true so again may narrow things down a bit isPublic: doesn't help Adding the catalog relationship doesn't seem to show anything immediately useful either. Can anyone help? Ideally I'd like to see this as a "kind" or "type" as it has different properties to other playlists, but frankly I'll take anything at this point.

Hi all, I have been quite stumped on this behavior for a little bit now, so thought it best to share here and see if someone more experience with AVAudioEngine / AVAudioSession can weigh in. Right now I have a AVAudioEngine that I am using to perform some voice chat with and give buffers to play. This works perfectly until route changes start to occur, which causes the AVAudioEngine to reset itself, which then causes all players attached to this engine to be stopped. Once a AVPlayerNode gets stopped due to this (but also any other time), all samples that were scheduled to be played then get purged. Where this becomes confusing for me is the completion handler gets called every time regardless of the sound actually being played. Is there a reliable way to know if a sample needs to be rescheduled after a player has been reset? I am not quite sure in my case what my observer of AVAudioEngineConfigurationChange needs to be doing, as this engine only handles output. All input is through a separate engine for simplicity. Currently I am storing a queue of samples as they get sent to the AVPlayerNode for playback, and after that completion checking if the player isPlaying or not. If it's playing I assume that the sound actually was played- and if not then I leave it in the queue and assume that an observer on the route change or the configuration change will realize there are samples in the queue and reset them Thanks for any feedback!

Hello, Has anyone else experienced variations in the accuracy of the playbackTime value? After a few seconds of playback, the reported time adjusts by a fraction of a second, making it difficult to calculate the actual playbackTime of the audio. This can be recreated by playing a song in MusicKit, recording the start time of the audio, playing for at least 10-20 seconds, and then comparing the playbackTime value to one calculated using the start time of the audio. In my experience this jump occurs after about 10 seconds of playback. Any help would be appreciated. Thanks!

iPadOS 18.3 beta 3 (22D5055b) fixed the issue for me and my 7th generation iPad.

I have tried everything. The songs load unto the playlists and on searches, but when prompted to play, they just won't play. I have a wrapper since my main player (which carries the buttons for play/rewind/forward/etc.), is in Objc. // // ApplePlayerWrapper.swift // UniversallyMac // // Created by Dorian Mattar on 11/10/24. // import Foundation import MusicKit import MediaPlayer @objc public class MusicKitWrapper: NSObject { @objc public static let shared = MusicKitWrapper() private let player = ApplicationMusicPlayer.shared // Play the current track @objc public func play() { guard !player.queue.entries.isEmpty else { print("Queue is empty. Cannot start playback.") return } logPlayerState(message: "Before play") Task { do { try await player.prepareToPlay() try await player.play() print("Playback started successfully.") } catch { if let nsError = error as NSError? { print("NSError Code: \(nsError.code), Domain: \(nsError.domain)") } } logPlayerState(message: "After play") } } // Log the current player state @objc public func logPlayerState(message: String = "") { print("Player State - \(message):") print("Playback Status: \(player.state.playbackStatus)") print("Queue Count: \(player.queue.entries.count)") // Only log current track details if the player is playing if player.state.playbackStatus == .playing { if let currentEntry = player.queue.currentEntry { print("Current Track: \(currentEntry.title)") print("Current Position: \(player.playbackTime) seconds") print("Track Length: \(currentEntry.endTime ?? 0.0) seconds") } else { print("No current track.") } } else { print("No track is playing.") } print("----------") } // Debug the queue @objc public func debugQueue() { print("Debugging Queue:") for (index, entry) in player.queue.entries.enumerated() { print("\(index): \(entry.title)") } } // Ensure track availability in the queue public func queueTracks(_ tracks: [Track]) { Task { do { for track in tracks { // Validate Play Parameters guard let playParameters = track.playParameters else { print("Track \(track.title) has no Play Parameters.") continue } // Log the Play Parameters print("Track Title: \(track.title)") print("Play Parameters: \(playParameters)") print("Raw Values: \(track.id.rawValue)") // Ensure the ID is valid if track.id.rawValue.isEmpty { print("Track \(track.title) has an invalid or empty ID in Play Parameters.") continue } // Queue the track try await player.queue.insert(track, position: .afterCurrentEntry) print("Queued track: \(track.title)") } print("Tracks successfully added to the queue.") } catch { print("Error queuing tracks: \(error)") } debugQueue() } } // Clear the current queue @objc public func resetMusicPlayer() { Task { player.stop() player.queue.entries.removeAll() print("Queue cleared.") print("Apple Music player reset successfully.") } } } I opened an Apple Dev. ticket, but I'm trying here as well. Thanks!

Hi, I'm trying to plan out development of an app and am wondering if it is possible to have user generated content automatically populate into a custom shazamkit catalogue and be able to query this catalogue non-locally? Storing all the submissions locally would obviously not scale.

Session player regions populate blank, with no sound media when tracks or regions are created.

I'm able to get text to speech to audio file using the following code for iOS 12 iPhone 8 to create a car file: audioFile = try AVAudioFile( forWriting: saveToURL, settings: pcmBuffer.format.settings, commonFormat: .pcmFormatInt16, interleaved: false) where pcmBuffer.format.settings is: [AVAudioFileTypeKey: kAudioFileMP3Type, AVSampleRateKey: 48000, AVEncoderBitRateKey: 128000, AVNumberOfChannelsKey: 2, AVFormatIDKey: kAudioFormatLinearPCM] However, this code does not work when I run the app in iOS 18 on iPhone 13 Pro Max. The audio file is created, but it doesn't sound right. It has a lot of static and it seems the speech is very low pitch. Can anyone give me a hint or an answer?

Dear Sirs, I’ve written a virtual audio driver based on AudioDriverKit and running as dext in my MacOS app. Sometimes when waking up from a sleep state the recording side of my driver extension seems to hang and I don’t see any calls to my io_operation callback. Then the recording app like a DAW seems to hang when trying to start a recording. This doesn’t happen after short sleep states or after a complete new start of my MacBook. I already opened a case in Feedback-Assistant on 5th of May (FB17503622) which also includes a sysdiagnose and a ktrace but I didn't get any feedback so far. Meanwhile some of our customers are getting angry and I'd like to know if there's anything I could do to fix this problem on my side. We’re not sure whether this worked in previous MacOS versions, we think we didn’t observe this before 15.3.1 but at least since 15.3.1. we’ve seen this problem. Best regards, Johannes

Does anyone know how to pronounce the sound of a specific instrument when you tap a button on the screen on your iPhone or iPad? Now, in the middle of creating a music learning app, I'm thinking of assigning monotones or chords to the button-like frames on the keyboard and fingerboard on the screen. Can it be achieved with SwiftUI chords alone? Once upon a time, MIDI level 1 I remember that there was a pronunciation function of the instrument, but I don't think about implementing the same function in the current OS. Please lend me your wisdom.

Environment→ ・Device: iPad 10th generation ・OS：**iOS18.3.2 I'm using AVAudioSession to record sound in my application. But I recently came to realize that when the app starts a recording session on a tablet, OS automatically sets the tablet volume to 50% and when after recording ends, it doesn't change back to the previous volume level before starting the recording. So I would like to know whether this is an OS default behavior or a bug? If it's a default behavior, I much appreciate if I can get a link to the documentation.

Hi, I'm working on an audio mixing app, that comes with bundled audio units that provide some of the app's core functionality. For the next release of that app, we are planning to make two changes: make the app sandboxed package the bundled audio units as .appex bundles instead as .component bundles, so we don't need to take care of the installation at the correct spot in the file system When trying this new approach, we run into problems where [[AVAudioUnitEffect alloc] initWithAudioComponentDescription:] crashes when trying to load our audio unit with the exception: AVAEInternal.h:109 [AUInterface.mm:468:AUInterfaceBaseV3: (AudioComponentInstanceNew(comp, &_auv2)): error -10863 Our audio unit has the `sandboxSafe flag enabled, and loads fine when the host app is not sandboxed, so I'm guessing I got the bundle id/code signing requirements for the .appex correct. It seems, that my .appex isn't even loaded, and the system rejects it because of its metadata. Maybe there something wrong the Info.plist generated by Juice? "BuildMachineOSBuild" => "23H222" "CFBundleDisplayName" => "elgato_sample_recorder" "CFBundleExecutable" => "ElgatoSampleRecorder" "CFBundleIdentifier" => "com.iwascoding.EffectLoader.samplerecorderAUv3" "CFBundleName" => "elgato_sample_recorder" "CFBundlePackageType" => "XPC!" "CFBundleShortVersionString" => "1.0.0.0" "CFBundleSignature" => "????" "CFBundleSupportedPlatforms" => [ 0 => "MacOSX" ] "CFBundleVersion" => "1.0.0.0" "DTCompiler" => "com.apple.compilers.llvm.clang.1_0" "DTPlatformBuild" => "24C94" "DTPlatformName" => "macosx" "DTPlatformVersion" => "15.2" "DTSDKBuild" => "24C94" "DTSDKName" => "macosx15.2" "DTXcode" => "1620" "DTXcodeBuild" => "16C5032a" "LSMinimumSystemVersion" => "10.13" "NSExtension" => { "NSExtensionAttributes" => { "AudioComponents" => [ 0 => { "description" => "Elgato Sample Recorder" "factoryFunction" => "elgato_sample_recorderAUFactoryAUv3" "manufacturer" => "Manu" "name" => "Elgato: Elgato Sample Recorder" "sandboxSafe" => 1 "subtype" => "Znyk" "tags" => [ 0 => "Effects" ] "type" => "aufx" "version" => 65536 } ] } "NSExtensionPointIdentifier" => "com.apple.AudioUnit-UI" "NSExtensionPrincipalClass" => "elgato_sample_recorderAUFactoryAUv3" } "NSHighResolutionCapable" => 1 } Any ideas what I am missing?

ApplicationMusicPlayer is not available on watchOS but all other platforms. Is there a technical reason for that like battery life? Same goes for SystemMusicPlayer and MPMusicPlayerController. I already filed feedbacks for that.

Hi folks - I'm having trouble finding specific documentation about Audio Unit MIDI plugins - as in MIDI -only. Any suggestions welcome as searches aren't returning much. (too niche? user error?)

Among the millions of users of our online product, we have identified through data metrics that the silent audio data capture rate on iPadOS 18.4.1 or 18.5 has increased abnormally. However, we are unable to reproduce the issue. Has anyone encountered a similar issue? The parameters we used are as follows: AudioSession: category:AVAudioSessionCategoryPlayAndRecord mode:AVAudioSessionModeDefault option:77 preferredSampleRate:48000.000000 preferredIOBufferDuration:0.010000 AudioUnit format.mFormatID = kAudioFormatLinearPCM; format.mSampleRate = 48000.0; format.mChannelsPerFrame = 2; format.mBitsPerChannel = 16; format.mFramesPerPacket = 1; format.mBytesPerFrame = format.mChannelsPerFrame * 16 / 8; format.mBytesPerPacket = format.mBytesPerFrame * format.mFramesPerPacket; format.mFormatFlags = kAudioFormatFlagsNativeEndian | kLinearPCMFormatFlagIsPacked | kLinearPCMFormatFlagIsSignedInteger; component.componentType = kAudioUnitType_Output; component.componentSubType = kAudioUnitSubType_RemoteIO; component.componentManufacturer = kAudioUnitManufacturer_Apple; component.componentFlags = 0; component.componentFlagsMask = 0;

I’m currently developing an iOS metronome app using DispatchSourceTimer as the timer. The interval is set very small, around 50 milliseconds, and I’m using CFAbsoluteTimeGetCurrent to calculate the elapsed time to ensure the beat is played within a ±0.003-second margin. The problem is that once the app goes to the background, the timing becomes unstable—it slows down noticeably, then recovers after 1–2 seconds. When coming back to the foreground, it suddenly speeds up, and again, it takes 1–2 seconds to return to normal. It feels like the app is randomly “powering off” and then “overclocking.” It’s super frustrating. I’ve noticed that some metronome apps in the App Store have similar issues, but there’s one called “Professional Metronome” that’s rock solid with no such problems. What kind of magic are they using? Any experts out there who can help? Thanks in advance! P.S. I’ve already enabled background audio permissions. The professional metronome that has no issues: https://link.zhihu.com/?target=https%3A//apps.apple.com/cn/app/pro-metronome-%25E4%25B8%2593%25E4%25B8%259A%25E8%258A%2582%25E6%258B%258D%25E5%2599%25A8/id477960671

On Apple TV 4K 3rd generation, with tvOS 26 beta 2, when two HomePod 2 are paired to the device, music and movie sources with Dolby Atmos can only be listened to in stereo. dolby atmos not supported

My audio app shows a control bar at the bottom of the window. The controls show nicely, but there is a black "slab" appearing behind the inline controls, the same size as the playerView. Setting the player view background color does nothing: playerView.wantsLayer = true playerView.layer?.backgroundColor = NSColor.clear.cgColor How can I clear the background? If I use .floating controlsStyle, I don't get the background "slab".

I have spent a long time refactoring lots of older Swift code to compile without error in Swift 6. The app is a v3 audio unit host and audio unit. Having installed Sonoma and XCode 16 I compile the code using Swift 6 and it compiles and runs without any warnings or errors. My host will load my AU no problem. LOGIC PRO is still the ONLY audio unit host that will load native Mac V3 audio units and so I like to test my code using Logic. In Sonoma with XCode 16... My AU passes the most stringent AUVAL tests both in terminal and Logic pro. If I compile the AU source in Swift 5 Logic will see the AU, load it and run it without problems. But when I compile the AU in Swift 6 Logic sees the AU, will scan it and verify it passes the tests but will not load the AU. In XCode I see a log message that a "helper application failed to run" but the debugger never connects to the AU and I don't think Logic even gets as far as instantiating the AU. So... what is causing this? I'm stumped.. Developing AUv3 is a brain-aching maze of undocumented hurdles and I'm hoping someone might have found a solution for this one. Meanwhile I guess my only option is to continue using the Swift 5 compiler. (appending a little note just to mention that all the DSP code is written in C/C++, Swift is used mainly for the user interface and also does some offline thready work )