Hi all, I have spent a lot of time reading the tech note and watching the WDDC video that introduce the PTTFramework on iOS. I currently have a custom setup where I am using AVAudioEngine to schedule and play buffers that are being streamed through a call. I am looking to use the PTTFramework to allow a user to trigger this push to talk behavior from the lock screen and the various places with the system UI it provides. However I am unsure what the correct behavior is regarding the handling of the audio session. Right now I am using .playback when there is no active voice transmission so that devices such as AirPods can be in AD2P mode where applicable, and then transitioning to .playbackAndRecord category only when the mic input should become active. Following this change in my AVAudioEngine manager I am then manually activating and deactivating the audio session manually when the engine is either playing/recording or idle. In the documentation it states that you should not attempt to activate or deactivate your audio session directly, but allow the framework to handle it. Does that mean that I need to either call the request to transmit delegate function or set an active participant on the channel manager first, and then wait for the didBecomeActive delegate method to trigger before I actually attempt to play or record any audio? (I am using the fullDuplex mode currently.) I noticed that that delegate method will only trigger if the audio session wasn't active before doing one of the above (setting active participant, requesting transmit). Lastly, when using the PTTFramework it also mentions that we get support for PTT devices and I notice on the didBeginTransmittingFrom property we have a handsfreeButton case. Is there any documentation or resources for what is actually supported out of the box for this? I am currently working on handling a lot of the push to talk through bluetooth LE, and wanted to make sure there wasn't overlap with what the system provides. Thank you!

Hi, I'm working on an audio mixing app, that comes with bundled audio units that provide some of the app's core functionality. For the next release of that app, we are planning to make two changes: make the app sandboxed package the bundled audio units as .appex bundles instead as .component bundles, so we don't need to take care of the installation at the correct spot in the file system When trying this new approach, we run into problems where [[AVAudioUnitEffect alloc] initWithAudioComponentDescription:] crashes when trying to load our audio unit with the exception: AVAEInternal.h:109 [AUInterface.mm:468:AUInterfaceBaseV3: (AudioComponentInstanceNew(comp, &_auv2)): error -10863 Our audio unit has the `sandboxSafe flag enabled, and loads fine when the host app is not sandboxed, so I'm guessing I got the bundle id/code signing requirements for the .appex correct. It seems, that my .appex isn't even loaded, and the system rejects it because of its metadata. Maybe there something wrong the Info.plist generated by Juice? "BuildMachineOSBuild" => "23H222" "CFBundleDisplayName" => "elgato_sample_recorder" "CFBundleExecutable" => "ElgatoSampleRecorder" "CFBundleIdentifier" => "com.iwascoding.EffectLoader.samplerecorderAUv3" "CFBundleName" => "elgato_sample_recorder" "CFBundlePackageType" => "XPC!" "CFBundleShortVersionString" => "1.0.0.0" "CFBundleSignature" => "????" "CFBundleSupportedPlatforms" => [ 0 => "MacOSX" ] "CFBundleVersion" => "1.0.0.0" "DTCompiler" => "com.apple.compilers.llvm.clang.1_0" "DTPlatformBuild" => "24C94" "DTPlatformName" => "macosx" "DTPlatformVersion" => "15.2" "DTSDKBuild" => "24C94" "DTSDKName" => "macosx15.2" "DTXcode" => "1620" "DTXcodeBuild" => "16C5032a" "LSMinimumSystemVersion" => "10.13" "NSExtension" => { "NSExtensionAttributes" => { "AudioComponents" => [ 0 => { "description" => "Elgato Sample Recorder" "factoryFunction" => "elgato_sample_recorderAUFactoryAUv3" "manufacturer" => "Manu" "name" => "Elgato: Elgato Sample Recorder" "sandboxSafe" => 1 "subtype" => "Znyk" "tags" => [ 0 => "Effects" ] "type" => "aufx" "version" => 65536 } ] } "NSExtensionPointIdentifier" => "com.apple.AudioUnit-UI" "NSExtensionPrincipalClass" => "elgato_sample_recorderAUFactoryAUv3" } "NSHighResolutionCapable" => 1 } Any ideas what I am missing?

A bit of a novice to app development here but I have a paid developer account, I have registered the identifier for MusicKit on the developer website (using the bundle identifier I've selected in Xcode) but the option to add MusicKit as a capability is not available in Xcode? I've manually updated the certificates, closed the app and reopened it, started a new project and tried with a different demo project? Apologies if I am missing something obvious but could someone help me get this capability added?

I'm developing a TTS Audio Unit Extension that needs to write trace/log files to a shared App Group container. While the main app can successfully create and write files to the container, the extension gets sandbox denied errors despite having proper App Group entitlements configured. Setup: Main App (Flutter) and TTS Audio Unit Extension share the same App Group App Group is properly configured in developer portal and entitlements Main app successfully creates and uses files in the container Container structure shows existing directories (config/, dictionary/) with populated files Both targets have App Group capability enabled and entitlements set Current behavior: Extension can access/read the App Group container Extension can see existing directories and files All write attempts are blocked with "sandbox deny(1) file-write-create" errors Code example: const char* createSharedGroupPathWithComponent(const char* groupId, const char* component) { NSString* groupIdStr = [NSString stringWithUTF8String:groupId]; NSString* componentStr = [NSString stringWithUTF8String:component]; NSURL* url = [[NSFileManager defaultManager] containerURLForSecurityApplicationGroupIdentifier:groupIdStr]; NSURL* fullPath = [url URLByAppendingPathComponent:componentStr]; NSError *error = nil; if (![[NSFileManager defaultManager] createDirectoryAtPath:fullPath.path withIntermediateDirectories:YES attributes:nil error:&error]) { NSLog(@"Unable to create directory %@", error.localizedDescription); } return [[fullPath path] UTF8String]; } Error output: Sandbox: simaromur-extension(996) deny(1) file-write-create /private/var/mobile/Containers/Shared/AppGroup/36CAFE9C-BD82-43DD-A962-2B4424E60043/trace Key questions: Are there additional entitlements required for TTS Audio Unit Extensions to write to App Group containers? Is this a known limitation of TTS Audio Unit Extensions? What is the recommended way to handle logging/tracing in TTS Audio Unit Extensions? If writing to App Group containers is not supported, what alternatives are available? Current entitlements: <dict> <key>com.apple.security.application-groups</key> <array> <string>group.com.<company>.<appname></string> </array> </dict>

I am trying to get MIDI output from the AU Host demo app using the recent MIDI processor example. The processor works correctly in Logic Pro, but I cannot send MIDI from the AUv3 extension in standalone mode using the default host app to another program (e.g., Ableton). The MIDI manager, which is part of the standalone host app, works fine, and I can send MIDI using it directly—Ableton receives it without issues. I have already set the midiOutputNames in the extension, and the midiOutBlock is mapped. However, the MIDI data from the AUv3 extension does not reach Ableton in standalone mode. I suspect the issue is that midiOutBlock might never be called in the plugin, or perhaps an input to the plugin is missing, which prevents it from sending MIDI. I am currently using the default routing. I have modified the MIDI manager such that it works well as described above. Here is a part of my code for SimplePlayEngine.swift and my MIDIManager.swift for reference: @MainActor @Observable public class SimplePlayEngine { private let midiOutBlock: AUMIDIOutputEventBlock = { sampleTime, cable, length, data in return noErr } var scheduleMIDIEventListBlock: AUMIDIEventListBlock? = nil public init() { engine.attach(player) engine.prepare() setupMIDI() } private func setupMIDI() { if !MIDIManager.shared.setupPort(midiProtocol: MIDIProtocolID._2_0, receiveBlock: { [weak self] eventList, _ in if let scheduleMIDIEventListBlock = self?.scheduleMIDIEventListBlock { _ = scheduleMIDIEventListBlock(AUEventSampleTimeImmediate, 0, eventList) } }) { fatalError("Failed to setup Core MIDI") } } func initComponent(type: String, subType: String, manufacturer: String) async -> ViewController? { reset() guard let component = AVAudioUnit.findComponent(type: type, subType: subType, manufacturer: manufacturer) else { fatalError("Failed to find component with type: \(type), subtype: \(subType), manufacturer: \(manufacturer))" ) } do { let audioUnit = try await AVAudioUnit.instantiate( with: component.audioComponentDescription, options: AudioComponentInstantiationOptions.loadOutOfProcess) self.avAudioUnit = audioUnit self.connect(avAudioUnit: audioUnit) return await audioUnit.loadAudioUnitViewController() } catch { return nil } } private func startPlayingInternal() { guard let avAudioUnit = self.avAudioUnit else { return } setSessionActive(true) if avAudioUnit.wantsAudioInput { scheduleEffectLoop() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) do { try engine.start() } catch { isPlaying = false fatalError("Could not start engine. error: \(error).") } if avAudioUnit.wantsAudioInput { player.play() } isPlaying = true } private func resetAudioLoop() { guard let avAudioUnit = self.avAudioUnit else { return } if avAudioUnit.wantsAudioInput { guard let format = file?.processingFormat else { fatalError("No AVAudioFile defined.") } engine.connect(player, to: engine.mainMixerNode, format: format) } } public func connect(avAudioUnit: AVAudioUnit?, completion: @escaping (() -> Void) = {}) { guard let avAudioUnit = self.avAudioUnit else { return } engine.disconnectNodeInput(engine.mainMixerNode) resetAudioLoop() engine.detach(avAudioUnit) func rewiringComplete() { scheduleMIDIEventListBlock = auAudioUnit.scheduleMIDIEventListBlock if isPlaying { player.play() } completion() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) if isPlaying { player.pause() } let auAudioUnit = avAudioUnit.auAudioUnit if !auAudioUnit.midiOutputNames.isEmpty { auAudioUnit.midiOutputEventBlock = midiOutBlock } engine.attach(avAudioUnit) if avAudioUnit.wantsAudioInput { engine.disconnectNodeInput(engine.mainMixerNode) if let format = file?.processingFormat { engine.connect(player, to: avAudioUnit, format: format) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: format) } } else { let stereoFormat = AVAudioFormat(standardFormatWithSampleRate: hardwareFormat.sampleRate, channels: 2) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: stereoFormat) } rewiringComplete() } } and my MIDI Manager @MainActor class MIDIManager: Identifiable, ObservableObject { func setupPort(midiProtocol: MIDIProtocolID, receiveBlock: @escaping @Sendable MIDIReceiveBlock) -> Bool { guard setupClient() else { return false } if MIDIInputPortCreateWithProtocol(client, portName, midiProtocol, &port, receiveBlock) != noErr { return false } for source in self.sources { if MIDIPortConnectSource(port, source, nil) != noErr { print("Failed to connect to source \(source)") return false } } setupVirtualMIDIOutput() return true } private func setupVirtualMIDIOutput() { let virtualStatus = MIDISourceCreate(client, virtualSourceName, &virtualSource) if virtualStatus != noErr { print("❌ Failed to create virtual MIDI source: \(virtualStatus)") } else { print("✅ Created virtual MIDI source: \(virtualSourceName)") } } func sendMIDIData(_ data: [UInt8]) { print("hey") var packetList = MIDIPacketList() withUnsafeMutablePointer(to: &packetList) { ptr in let pkt = MIDIPacketListInit(ptr) _ = MIDIPacketListAdd(ptr, 1024, pkt, 0, data.count, data) if virtualSource != 0 { let status = MIDIReceived(virtualSource, ptr) if status != noErr { print("❌ Failed to send MIDI data: \(status)") } else { print("✅ Sent MIDI data: \(data)") } } } } }

Is it possible to find IDR frame (CMSampleBuffer) in AVAsset h264 video file?

Session player regions populate blank, with no sound media when tracks or regions are created.

Hello, I'm evaluating the Apple Music Feed dataset and I noticed that the total number of songs available in the feed is too small. As of today, the number of objects returned in each feed is: 51,198,712 albums 23,093,698 artists 173,235,315 songs This gives an average of 3.38 songs per album which is quite low. Also, iterating on the data I see that there are albums referencing songs that don't exist in the songs feed. I would like to know: Is the feed data incomplete? If so, in what situations an object may be missing from the feed? Thank you in advance!

According to the header file the outputVolume properties supported range is 0.0-1.0: /*! @property outputVolume @abstract The mixer's output volume. @discussion This accesses the mixer's output volume (0.0-1.0, inclusive). @property (nonatomic) float outputVolume; However when setting the volume to 2.0 the audio does indeed play louder. Is the header file out of date and if so, what is the supported range for outputVolume? Thanks

I’m running HomePod OS 26 on two HomePod minis and OS 18.6 on main HomePod (original) I’ve enabled Crossfade in the Home app. I’m playing Apple Music directly in the HomePod mini. Crossfade just doesn’t work on any HomePod. I can understand it not working on the HomePod - but why isn’t it working on the minis running OS 26? I’ve tried disabling and enabling Crossfade, rebooting HomePods etc but nothing?!

I need to implement a solution through an API or custom driver to completely block out the built-in speakers and microphone of Mac, because I need other apps to use specified external devices as audio input and output. Is there a way to achieve this requirement? What I mean is that even in system preferences, it should not be possible to choose the built-in microphone and speakers; only my external device can be used.

I ran 5.1 audio tests in both YouTube and Apple Music, and I noticed that when sound is supposed to play from the rear or front surround speakers, it’s also duplicated in the front left and right channels. I’m absolutely sure the issue is with the Apple TV, because I played the same video directly through my TV’s native system, and the channel separation was correct. Everything used to work perfectly before, so this must be a software issue. I’m currently on tvOS 26 Developer Beta 5, but I’m certain the problem also existed on the stable tvOS 18.5. I’ve already reset and updated my Apple TV, and I also tried switching the audio format to forced Dolby Atmos 5.1. On the forums, I mostly see complaints about Dolby Atmos not working at all — in my case, everything technically works, but not the way it’s supposed to.

Please Update Andorid MusicKit，the version 1.1.2 will complied fail。the error msg：•SDKUriHandlerActivity>. Apps targeting Android 12 and higher are required to specify an explicit value for android:exported when the corres

3 I am working on an application to get when input audio device is being used. Basically I want to know the application using the microphone (built-in or external) This app runs on macOS. For Mac versions starting from Sonoma I can use this code: int getAudioProcessPID(AudioObjectID process) { pid_t pid; if (@available(macOS 14.0, *)) { constexpr AudioObjectPropertyAddress prop { kAudioProcessPropertyPID, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMain }; UInt32 dataSize = sizeof(pid); OSStatus error = AudioObjectGetPropertyData(process, &prop, 0, nullptr, &dataSize, &pid); if (error != noErr) { return -1; } } else { // Pre sonoma code goes here } return pid; } which works. However, kAudioProcessPropertyPID was added in macOS SDK 14.0. Does anyone know how to achieve the same functionality on previous versions?

I am developing an app that uses MusicKit to play music and then I need to have spoken words played to the user, while ducking the audio coming from MusicKit (application music player) the built in Siri voices are not off sufficient quality so I am using an external service to create an mp3 file and then play this back using AVAudioSession Sample code below the problem I am having is that .duckOthers is not ducking the Application Music Player output Is this a bug or am I doing this wrong? // Configure audio session for system-wide ducking try AVAudioSession.sharedInstance().setCategory(.playback, mode: .spokenAudio, options: [.duckOthers, .mixWithOthers]) try AVAudioSession.sharedInstance().setActive(true) // Set the ducking level to maximum try AVAudioSession.sharedInstance().setPreferredIOBufferDuration(0.005) // Create and configure audio player self.audioPlayer = try AVAudioPlayer(data: audioData) self.audioPlayer?.delegate = self self.audioPlayer?.volume = 1.0 // Ensure full volume for speech self.audioPlayer?.prepareToPlay() // Set the audio player's settings for maximum clarity self.audioPlayer?.enableRate = false self.audioPlayer?.pan = 0.0 // Center the audio self.audioPlayer?.play()

Using the official SwiftTranscriptionSampleApp from WWDC 2025, speech transcription takes 14+ seconds from audio input to first result, making it unusable for real-time applications. Environment iOS: 26.0 Beta Xcode: Beta 5 Device: iPhone 16 pro Sample App: Official Apple SwiftTranscriptionSampleApp from WWDC 2025 Configuration Tested Locale: en-US (properly allocated with AssetInventory.allocate(locale:)) and es-ES Setup: All optimizations applied (preheating, high priority, model retention) I started testing in my own app to replace SFSpeech API and include speech detection but after long fights with documentation (this part is quite terrible TBH) I tested the example (https://developer.apple.com/documentation/speech/bringing-advanced-speech-to-text-capabilities-to-your-app) and saw same results. I added some logs to check the specific time: 🎙️ [20:30:41.532] ✅ Analyzer started successfully - ready to receive audio! 🎙️ [20:30:41.532] Listening for transcription results... 🎙️ [20:30:56.342] 🚀 FIRST TRANSCRIPTION RESULT after 14.810s: 'Hello' (isFinal: false) Questions Is this expected performance for iOS 26 Beta, because old SFSpeech is far faster? Are there additional optimization steps for SpeechTranscriber? Should we expect significant performance improvements in later betas?

Hi, In my project I am using AVFoundation for recording the audio. We are using AVAudioMixerNode class below method to record the audio packet. **func installTap( onBus bus: AVAudioNodeBus, bufferSize: AVAudioFrameCount, format: AVAudioFormat?, block tapBlock: @escaping AVAudioNodeTapBlock ) ** It works perfectly fine. But in production env some small percentage of the user we are facing issue like after recording few packets it stops automatically without stopping the audio engine. Can anyone help here that why this happens? I have also observed for mediaServicesWereResetNotification and added log on receiving this notification but when this issue happens I don't see any occurence of this log. Also is there any callback when the engine stops?

Mobile app - Ellie's Gift https://apps.apple.com/gb/app/ellies-gift/id1617597875 Using AVFoundation to play audio tracks within the app. Has always been working fine across apple and android, but iphone 14 and newer devices are unable to play audio. Any idea's or suggestions?

Overview We are producing audio in real time from an editing application and are trying to put that on an HLS stream. We attempt to submit PCM samples through an audio writer but are getting a crash after a select number of samples have been appended. Depending on the number of audio frames in the PCM buffer, we might get more iterations before the crash but it always has the same traceback (see below). Code The setup is rather simple. We took inspiration from a few sources around the web. NSMutableDictionary *audio = [[NSMutableDictionary alloc] init]; [audio setObject:@(kAudioFormatMPEG4AAC) forKey:AVFormatIDKey]; [audio setObject:[NSNumber numberWithInt:config.audioSampleRate] // 48000 forKey:AVSampleRateKey]; [audio setObject:[NSNumber numberWithInt:config.audioChannels] // 2 forKey:AVNumberOfChannelsKey]; [audio setObject:@160000 forKey:AVEncoderBitRateKey]; m_audioConfig = [[NSDictionary alloc] initWithDictionary:audio]; m_audio = [[AVAssetWriterInput alloc] initWithMediaType:AVMediaTypeAudio outputSettings:m_audioConfig]; AVAudioFrameCount audioFrames = BUFFER_SAMPLES * bCount; AVAudioPCMBuffer *pcmBuffer = [[AVAudioPCMBuffer alloc] initWithPCMFormat:m_full.pcmFormat frameCapacity:audioFrames]; pcmBuffer.frameLength = pcmBuffer.frameCapacity; AudioChannelLayout layout; memset(&layout, 0, sizeof(layout)); layout.mChannelLayoutTag = kAudioChannelLayoutTag_Stereo; CMFormatDescriptionRef format; OSStatus stats = CMAudioFormatDescriptionCreate( kCFAllocatorDefault, pcmBuffer.format.streamDescription, sizeof(layout), &layout, 0, nil, nil, &format ); for (int i = 0; i < bCount; i++) { AudioPCM pcm; audioCallback->callback(pcm); memcpy(*(pcmBuffer.int16ChannelData) + (bufferSize * i), pcm.data, bufferSize); } size_t samplesConsumed = BUFFER_SAMPLES * bCount; CMSampleBufferRef sampleBuffer; CMSampleTimingInfo timing; timing.duration = CMTimeMake(1, config.audioSampleRate); timing.presentationTimeStamp = presentationTime; timing.decodeTimeStamp = kCMTimeInvalid; OSStatus ostatus = CMSampleBufferCreate( kCFAllocatorDefault, nil, false, nil, nil, format, (CMItemCount)pcmBuffer.frameLength, 1, &timing, 0, nil, &sampleBuffer ); //// ostatus = CMSampleBufferSetDataBufferFromAudioBufferList( sampleBuffer, kCFAllocatorDefault, kCFAllocatorDefault, kCMSampleBufferFlag_AudioBufferList_Assure16ByteAlignment, pcmBuffer.audioBufferList ); if (ostatus != noErr) { NSLog(@"fill audio sample from buffer list failed: %s", logAudioError(ostatus)); return; } ostatus = CMSampleBufferSetDataReady(sampleBuffer); if (ostatus != noErr) { NSLog(@"set sample buffer ready failed: %s", logAudioError(ostatus)); return; } // Finally we can attach it, then shove the presentation time forward [m_audio appendSampleBuffer:sampleBuffer]; The Crash The crash points towards some level of deallocation when the conversion tooling is done or has enough samples to process an output packet? It's had to say. 0 caulk 0x1a1e9532c caulk::alloc::tiered_allocator<caulk::alloc::size_range_tier<0ul, 1008ul, caulk::alloc::tree_allocator<caulk::alloc::chunk_allocator<caulk::alloc::page_allocator, caulk::alloc::bitmap_allocator, caulk::alloc::embed_block_memory, 16384ul, 16ul, 6ul>>>, caulk::alloc::size_range_tier<1009ul, 256000ul, caulk::alloc::guarded_edges_allocator<caulk::alloc::consolidating_free_map<caulk::alloc::page_allocator, 10485760ul>, 4ul>>, caulk::alloc::tracking_allocator<caulk::alloc::page_allocator>>::deallocate(caulk::alloc::block, unsigned long) + 636 1 AudioToolboxCore 0x1993fbfe4 ExtendedAudioBufferList_Destroy + 112 2 AudioToolboxCore 0x1993d5fe0 std::__1::__optional_destruct_base<ACCodecOutputBuffer, false>::~__optional_destruct_base[abi:ne180100]() + 68 3 AudioToolboxCore 0x1993d5f48 acv2::CodecConverter::~CodecConverter() + 196 4 AudioToolboxCore 0x1993d5e5c acv2::CodecConverter::~CodecConverter() + 16 5 AudioToolboxCore 0x1992574d8 std::__1::vector<std::__1::unique_ptr<acv2::AudioConverterBase, std::__1::default_delete<acv2::AudioConverterBase>>, std::__1::allocator<std::__1::unique_ptr<acv2::AudioConverterBase, std::__1::default_delete<acv2::AudioConverterBase>>>>::__clear[abi:ne180100]() + 84 6 AudioToolboxCore 0x199259acc acv2::AudioConverterChain::RebuildConverterChain(acv2::ChainBuildSettings const&) + 116 7 AudioToolboxCore 0x1992596ec acv2::AudioConverterChain::SetProperty(unsigned int, unsigned int, void const*) + 1808 8 AudioToolboxCore 0x199324acc acv2::AudioConverterV2::setProperty(unsigned int, unsigned int, void const*) + 84 9 AudioToolboxCore 0x199327f08 with_resolved(OpaqueAudioConverter*, caulk::function_ref<int (AudioConverterAPI*)>) + 60 10 AudioToolboxCore 0x1993281e4 AudioConverterSetProperty + 72 11 MediaToolbox 0x1a7566c2c FigSampleBufferProcessorCreateWithAudioCompression + 2296 12 MediaToolbox 0x1a754db08 0x1a70b5000 + 4819720 13 MediaToolbox 0x1a754dab4 FigMediaProcessorCreateForAudioCompressionWithFormatWriter + 100 14 MediaToolbox 0x1a77ebb98 0x1a70b5000 + 7564184 15 MediaToolbox 0x1a7804158 0x1a70b5000 + 7663960 16 MediaToolbox 0x1a7801da0 0x1a70b5000 + 7654816 17 AVFCore 0x1ada530c4 -[AVFigAssetWriterTrack addSampleBuffer:error:] + 192 18 AVFCore 0x1ada55164 -[AVFigAssetWriterAudioTrack _flushPendingSampleBuffersReturningError:] + 500 19 AVFCore 0x1ada55354 -[AVFigAssetWriterAudioTrack addSampleBuffer:error:] + 472 20 AVFCore 0x1ada4ebf0 -[AVAssetWriterInputWritingHelper appendSampleBuffer:error:] + 128 21 AVFCore 0x1ada4c354 -[AVAssetWriterInput appendSampleBuffer:] + 168 22 lib_devapple_hls.dylib 0x115d2c7cc detail::AppleHLSImplementation::audioRuntime() + 1052 23 lib_devapple_hls.dylib 0x115d2d094 void* std::__1::__thread_proxy[abi:ne180100]<std::__1::tuple<std::__1::unique_ptr<std::__1::__thread_struct, std::__1::default_delete<std::__1::__thread_struct>>, void (detail::AppleHLSImplementation::*)(), detail::AppleHLSImplementation*>>(void*) + 72 24 libsystem_pthread.dylib 0x196e5b2e4 _pthread_start + 136 Any insight would be welcome!

Hi all, I have been quite stumped on this behavior for a little bit now, so thought it best to share here and see if someone more experience with AVAudioEngine / AVAudioSession can weigh in. Right now I have a AVAudioEngine that I am using to perform some voice chat with and give buffers to play. This works perfectly until route changes start to occur, which causes the AVAudioEngine to reset itself, which then causes all players attached to this engine to be stopped. Once a AVPlayerNode gets stopped due to this (but also any other time), all samples that were scheduled to be played then get purged. Where this becomes confusing for me is the completion handler gets called every time regardless of the sound actually being played. Is there a reliable way to know if a sample needs to be rescheduled after a player has been reset? I am not quite sure in my case what my observer of AVAudioEngineConfigurationChange needs to be doing, as this engine only handles output. All input is through a separate engine for simplicity. Currently I am storing a queue of samples as they get sent to the AVPlayerNode for playback, and after that completion checking if the player isPlaying or not. If it's playing I assume that the sound actually was played- and if not then I leave it in the queue and assume that an observer on the route change or the configuration change will realize there are samples in the queue and reset them Thanks for any feedback!