Hi everyone, I’m working on an iOS MusicKit app that overlays a metronome on top of Apple Music playback. To line the clicks up perfectly I’d like access to low-level audio analysis data—ideally a waveform / spectrogram or beat grid—while the track is playing. I’ve noticed that several approved DJ apps (e.g. djay, Serato, rekordbox) can already: • Display detailed scrolling waveforms of Apple Music songs • Scratch, loop or time-stretch those tracks in real time That implies they receive decoded PCM frames or at least high-resolution analysis data from Apple Music under a special entitlement. My questions: 1. Does MusicKit (or any public framework) expose real-time audio buffers, FFT bins, or beat markers for streaming Apple Music content? 2. If not, is there an Apple program or entitlement that developers can apply for—similar to the “DJ with Apple Music” initiative—to gain that deeper access? 3. Where can I find official documentation or a point of contact for this kind of request? I’ve searched the docs and forums but only see standard MusicKit playback APIs, which don’t appear to expose raw audio for DRM-protected songs. Any guidance, links or insider tips on the proper application process would be hugely appreciated! Thanks in advance.

Overview We are producing audio in real time from an editing application and are trying to put that on an HLS stream. We attempt to submit PCM samples through an audio writer but are getting a crash after a select number of samples have been appended. Depending on the number of audio frames in the PCM buffer, we might get more iterations before the crash but it always has the same traceback (see below). Code The setup is rather simple. We took inspiration from a few sources around the web. NSMutableDictionary *audio = [[NSMutableDictionary alloc] init]; [audio setObject:@(kAudioFormatMPEG4AAC) forKey:AVFormatIDKey]; [audio setObject:[NSNumber numberWithInt:config.audioSampleRate] // 48000 forKey:AVSampleRateKey]; [audio setObject:[NSNumber numberWithInt:config.audioChannels] // 2 forKey:AVNumberOfChannelsKey]; [audio setObject:@160000 forKey:AVEncoderBitRateKey]; m_audioConfig = [[NSDictionary alloc] initWithDictionary:audio]; m_audio = [[AVAssetWriterInput alloc] initWithMediaType:AVMediaTypeAudio outputSettings:m_audioConfig]; AVAudioFrameCount audioFrames = BUFFER_SAMPLES * bCount; AVAudioPCMBuffer *pcmBuffer = [[AVAudioPCMBuffer alloc] initWithPCMFormat:m_full.pcmFormat frameCapacity:audioFrames]; pcmBuffer.frameLength = pcmBuffer.frameCapacity; AudioChannelLayout layout; memset(&layout, 0, sizeof(layout)); layout.mChannelLayoutTag = kAudioChannelLayoutTag_Stereo; CMFormatDescriptionRef format; OSStatus stats = CMAudioFormatDescriptionCreate( kCFAllocatorDefault, pcmBuffer.format.streamDescription, sizeof(layout), &layout, 0, nil, nil, &format ); for (int i = 0; i < bCount; i++) { AudioPCM pcm; audioCallback->callback(pcm); memcpy(*(pcmBuffer.int16ChannelData) + (bufferSize * i), pcm.data, bufferSize); } size_t samplesConsumed = BUFFER_SAMPLES * bCount; CMSampleBufferRef sampleBuffer; CMSampleTimingInfo timing; timing.duration = CMTimeMake(1, config.audioSampleRate); timing.presentationTimeStamp = presentationTime; timing.decodeTimeStamp = kCMTimeInvalid; OSStatus ostatus = CMSampleBufferCreate( kCFAllocatorDefault, nil, false, nil, nil, format, (CMItemCount)pcmBuffer.frameLength, 1, &timing, 0, nil, &sampleBuffer ); //// ostatus = CMSampleBufferSetDataBufferFromAudioBufferList( sampleBuffer, kCFAllocatorDefault, kCFAllocatorDefault, kCMSampleBufferFlag_AudioBufferList_Assure16ByteAlignment, pcmBuffer.audioBufferList ); if (ostatus != noErr) { NSLog(@"fill audio sample from buffer list failed: %s", logAudioError(ostatus)); return; } ostatus = CMSampleBufferSetDataReady(sampleBuffer); if (ostatus != noErr) { NSLog(@"set sample buffer ready failed: %s", logAudioError(ostatus)); return; } // Finally we can attach it, then shove the presentation time forward [m_audio appendSampleBuffer:sampleBuffer]; The Crash The crash points towards some level of deallocation when the conversion tooling is done or has enough samples to process an output packet? It's had to say. 0 caulk 0x1a1e9532c caulk::alloc::tiered_allocator<caulk::alloc::size_range_tier<0ul, 1008ul, caulk::alloc::tree_allocator<caulk::alloc::chunk_allocator<caulk::alloc::page_allocator, caulk::alloc::bitmap_allocator, caulk::alloc::embed_block_memory, 16384ul, 16ul, 6ul>>>, caulk::alloc::size_range_tier<1009ul, 256000ul, caulk::alloc::guarded_edges_allocator<caulk::alloc::consolidating_free_map<caulk::alloc::page_allocator, 10485760ul>, 4ul>>, caulk::alloc::tracking_allocator<caulk::alloc::page_allocator>>::deallocate(caulk::alloc::block, unsigned long) + 636 1 AudioToolboxCore 0x1993fbfe4 ExtendedAudioBufferList_Destroy + 112 2 AudioToolboxCore 0x1993d5fe0 std::__1::__optional_destruct_base<ACCodecOutputBuffer, false>::~__optional_destruct_base[abi:ne180100]() + 68 3 AudioToolboxCore 0x1993d5f48 acv2::CodecConverter::~CodecConverter() + 196 4 AudioToolboxCore 0x1993d5e5c acv2::CodecConverter::~CodecConverter() + 16 5 AudioToolboxCore 0x1992574d8 std::__1::vector<std::__1::unique_ptr<acv2::AudioConverterBase, std::__1::default_delete<acv2::AudioConverterBase>>, std::__1::allocator<std::__1::unique_ptr<acv2::AudioConverterBase, std::__1::default_delete<acv2::AudioConverterBase>>>>::__clear[abi:ne180100]() + 84 6 AudioToolboxCore 0x199259acc acv2::AudioConverterChain::RebuildConverterChain(acv2::ChainBuildSettings const&) + 116 7 AudioToolboxCore 0x1992596ec acv2::AudioConverterChain::SetProperty(unsigned int, unsigned int, void const*) + 1808 8 AudioToolboxCore 0x199324acc acv2::AudioConverterV2::setProperty(unsigned int, unsigned int, void const*) + 84 9 AudioToolboxCore 0x199327f08 with_resolved(OpaqueAudioConverter*, caulk::function_ref<int (AudioConverterAPI*)>) + 60 10 AudioToolboxCore 0x1993281e4 AudioConverterSetProperty + 72 11 MediaToolbox 0x1a7566c2c FigSampleBufferProcessorCreateWithAudioCompression + 2296 12 MediaToolbox 0x1a754db08 0x1a70b5000 + 4819720 13 MediaToolbox 0x1a754dab4 FigMediaProcessorCreateForAudioCompressionWithFormatWriter + 100 14 MediaToolbox 0x1a77ebb98 0x1a70b5000 + 7564184 15 MediaToolbox 0x1a7804158 0x1a70b5000 + 7663960 16 MediaToolbox 0x1a7801da0 0x1a70b5000 + 7654816 17 AVFCore 0x1ada530c4 -[AVFigAssetWriterTrack addSampleBuffer:error:] + 192 18 AVFCore 0x1ada55164 -[AVFigAssetWriterAudioTrack _flushPendingSampleBuffersReturningError:] + 500 19 AVFCore 0x1ada55354 -[AVFigAssetWriterAudioTrack addSampleBuffer:error:] + 472 20 AVFCore 0x1ada4ebf0 -[AVAssetWriterInputWritingHelper appendSampleBuffer:error:] + 128 21 AVFCore 0x1ada4c354 -[AVAssetWriterInput appendSampleBuffer:] + 168 22 lib_devapple_hls.dylib 0x115d2c7cc detail::AppleHLSImplementation::audioRuntime() + 1052 23 lib_devapple_hls.dylib 0x115d2d094 void* std::__1::__thread_proxy[abi:ne180100]<std::__1::tuple<std::__1::unique_ptr<std::__1::__thread_struct, std::__1::default_delete<std::__1::__thread_struct>>, void (detail::AppleHLSImplementation::*)(), detail::AppleHLSImplementation*>>(void*) + 72 24 libsystem_pthread.dylib 0x196e5b2e4 _pthread_start + 136 Any insight would be welcome!

I have sent in a feedback report (FB18222398) but I have no idea if anyone has looked at it. I know from past experiences that Apple devs do look at these forums. This applies to each of the betas, 1, 2 and 3. I have created a new Personal Voice with each beta. I create a personal voice in English. When it's done processing, I tap Preview and it says in English what is expected. But after some time, an hour or a day, the language of the voice file changes languages and no longer works properly. If I press Preview it is no longer intelligible. I have a text to speech app and initially the created voice works but then when the language of the file changes, it no longer works. I have run an app on my iphone through Xcode that prints to the console the voices installed on the device with the language. Currently this is the voice file: Voice Identifier: com.apple.speech.personalvoice.AAA9C6F2-9125-475F-BA2F-22C63274991D Language: es-MX and on a second device the same personal voice is in a different language: Voice Identifier: com.apple.speech.personalvoice.AAA9C6F2-9125-475F-BA2F-22C63274991D Language: zh-CN Although, a previous personal voice file that listed as Spanish-Mexican played in English with a Spanish accent or when playing Spanish text, it sounded almost perfect. This current personal voice doesn't do that, and is unintelligible. Previous attempts have converted to Chinese. I hope someone can look into this.

Hello, We are developing a real-time speech recognition application and are utilizing AVAudioEngine with voice processing enabled on the input node. However, we have observed that enabling this mode interferes with the built-in iOS screen recording feature - specifically, the recorded video does not capture any audio when this mode is active. Since we want users to be able to record their experience within our app, this issue significantly impacts our functionality. Is there a known workaround or recommended approach to ensure that both voice processing and screen recording can function simultaneously? Any guidance would be greatly appreciated. Thank you!

Hello, I'm trying to receive parquet files using the example that provided in documentation. I've done all required steps but receive constantly error 500 with "Upstream Service Error". By looking into the issues list, seems this error exists for months. Is it possible to get it working?

Hello everyone, I'm implementing the new AVInputPickerInteraction API on iOS 26 to allow users to select their microphone from a custom settings menu before recording. The implementation seems correct, but I'm encountering a strange issue where the input selection immediately reverts to the previous device. The Situation: The picker is presented correctly via a manual call to .present(). I can see all available inputs (e.g., "iPhone Microphone" and "AirPods"). The current input is "iPhone Microphone". I tap on "AirPods". The UI updates to show "AirPods" as selected for a fraction of a second, then immediately jumps back to "iPhone Microphone". The same thing happens in reverse. It seems like the system is automatically reverting the audio route change requested by the picker. My Implementation: My setup follows the standard pattern discussed in the WWDC sessions. Setup Code: This setup is performed once before the user can trigger the picker. @available(iOS 26.0, *) var inputPickerInteraction: AVInputPickerInteraction? // Note: The AVAudioSession is configured to .playAndRecord // and set to active elsewhere in the code before this setup is called. if #available(iOS 26.0, *) { // Setup the picker let picker = AVInputPickerInteraction() self.inputPickerInteraction = picker self.view.addInteraction(picker) // Added to establish context } Presentation Code: When a user selects "Change Input" from my custom settings menu, I call .present() on the main thread. // In a delegate method from a custom menu if #available(iOS 26.0, *) { DispatchQueue.main.async { self.inputPickerInteraction?.present(animated: true) } } What I've already checked: The AVAudioSession is active and its category is .playAndRecord. The inputPickerInteraction object is not nil. The .present() method is being called on the main thread. The picker is added to a view using view.addInteraction() in the setup phase. I've reviewed my code to ensure there is no other logic that could be manually resetting the AVAudioSession's preferred input. Has anyone else experienced this behavior? I suspect this might be a bug in the new API, but I want to make sure I'm not missing a crucial step in managing the AVAudioSession state. Any insights or potential workarounds would be greatly appreciated. Thank you.

I'm using a 4 channel USB Audio interface, with 4 microphones, and want to process them through 4 independent effect chains. However the output from AVAudioInputNode is a single 4 channel bus. How can I split this into 4 mono busses? The following code splits the input into 4 copies, and routes them through the effects, but each bus contains all four channels. How can I remap the channels to remove the unwanted channels from the bus? I tried using channelMap on the mixer node but that had no effect. I'm currently using this code primarily on iOS but it should be portable between iOS and MacOS. It would be possible to do this through a Matrix Mixer Node, but that seems completely overkill, for such a basic operation. I'm already using a Matrix Mixer to combine the inputs, and it's not well supported in AVAudioEngine. AVAudioInputNode *inputNode=[engine inputNode]; [inputNode setVoiceProcessingEnabled:NO error:nil]; NSMutableArray *micDestinations=[NSMutableArray arrayWithCapacity:trackCount]; for(i=0;i<trackCount;i++) { fixMicFormat[i]=[AVAudioMixerNode new]; [engine attachNode:fixMicFormat[i]]; // And create reverb/compressor and eq the same way... [engine connect:reverb[i] to:matrixMixerNode fromBus:0 toBus:i format:nil]; [engine connect:eq[i] to:reverb[i] fromBus:0 toBus:0 format:nil]; [engine connect:compressor[i] to:eq[i] fromBus:0 toBus:0 format:nil]; [engine connect:fixMicFormat[i] to:compressor[i] fromBus:0 toBus:0 format:nil]; [micDestinations addObject:[[AVAudioConnectionPoint alloc] initWithNode:fixMicFormat[i] bus:0] ]; } AVAudioFormat *inputFormat = [inputNode outputFormatForBus: 1]; [engine connect:inputNode toConnectionPoints:micDestinations fromBus:1 format:inputFormat];

I've filed this as FB21446798 but figured I'd post here too. In the first build of macOS 26.3, playback via ApplicationMusicPlayer is completely broken. When starting playback of anything at all, the console shows the following error: applicationController: xpc service connection interrupted Failed to obtain remoteObject: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated from this process." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated from this process.} Failed to prepareToPlay with error: Error Domain=MPMusicPlayerControllerErrorDomain Code=10 "(null)" UserInfo={NSUnderlyingError=0xc92910ff0 {Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service created from an endpoint was invalidated from this process." UserInfo={NSDebugDescription=The connection to service created from an endpoint was invalidated from this process.}}} In addition, several crash logs for RemotePlayerService are generated, showing my app as the parent process. This issue is 100% repeatable. No matter how I load the queue, whether it’s catalog or library content, any variation I can think of all fails like this. I really hope this can be fixed before 26.3 comes out, otherwise my app will be totally unusable. 😅

My current app implements a custom video player, based on a AVSampleBufferRenderSynchronizer synchronising two renderers: an AVSampleBufferDisplayLayer receiving decoded CVPixelBuffer-based video CMSampleBuffers, and an AVSampleBufferAudioRenderer receiving decoded lpcm-based audio CMSampleBuffers. The AVSampleBufferRenderSynchronizer is started when the first image (in presentation order) is decoded and enqueued, using avSynchronizer.setRate(_ rate: Float, time: CMTime), with rate = 1 and time the presentation timestamp of the first decoded image. Presentation timestamps of video and audio sample buffers are consistent, and on most streams, the audio and video are correctly synchronized. However on some network streams, on iOS, the audio and video aren't synchronized, with a time difference that seems to increase with time. On the other hand, with the same player code and network streams on macOS, the synchronization always works fine. This reminds me of something I've read, about cases where an AVSampleBufferRenderSynchronizer could not synchronize audio and video, causing them to run with independent and potentially drifting clocks, but I cannot find it again. So, any help / hints on this sync problem will be greatly appreciated! :)

I have some tried-and-tested code that records and plays back audio via AUHAL which breaks on Tahoe on Intel. The same code works fine on Sequioa and also works on Tahoe on Apple Silicon. To start with something simple, the following code to request access to the Microphone doesn't work as it should: bool RequestMicrophoneAccess () { __block AVAuthorizationStatus status = [AVCaptureDevice authorizationStatusForMediaType: AVMediaTypeAudio]; if (status == AVAuthorizationStatusAuthorized) return true; __block bool done = false; [AVCaptureDevice requestAccessForMediaType: AVMediaTypeAudio completionHandler: ^ (BOOL granted) { status = (granted) ? AVAuthorizationStatusAuthorized : AVAuthorizationStatusDenied; done = true; }]; while (!done) CFRunLoopRunInMode (kCFRunLoopDefaultMode, 2.0, true); return status == AVAuthorizationStatusAuthorized; } On Tahoe on Intel, the code runs to completion but granted is always returned as NO. Tellingly, the popup to ask the user to grant microphone access is never displayed, even though the app is not present in the Privacy pane and never appears there. On Apple Silicon, everything works fine. There are some other problems, but I'm hoping they have a common underlying cause and that the Apple guys can figure out what's wrong from the information in this post. I'd be happy to test any potential fix. Thanks.

I'm developing an iOS app that requires continuous audio recording. Currently, when a phone call comes in, the AVAudioSession is interrupted and recording stops completely during the ringing phase. While I understand recording should stop if the call is answered, my app needs to continue recording while the phone is merely ringing. I've observed that Apple's Voice Memos app maintains recording during incoming call rings. This indicates the hardware and iOS are capable of supporting this functionality. Request Please advise on any available AVAudioSession configurations or APIs that would allow my app to: Continue recording during an incoming call ring Only stop recording if/when the call is actually answered Impact This interruption significantly impacts the user experience and core functionality of my app. Workarounds like asking users to enable airplane mode are impractical and create a poor user experience. Questions Is there an approved way to maintain microphone access during call rings? If not currently possible, could this capability be considered for addition to a future iOS SDK? Are there any interim solutions or best practices Apple recommends for this use case? Thank you for your help. SUPPORT INFORMATION Did someone from Apple ask you to submit a code-level support request? No Do you have a focused test project that demonstrates your issue? Yes, I have a focused test project to submit with my request What code level support issue are you having? Problems with an Apple framework API in my app

We have the necessary background recording entitlements, and for many users... do not run into any issues. However, there is a subset of users that routinely get recordings ending.. we have narrowed this down and believe it to be the work of the watch dog. First we removed the entire view hierarchy when app is backgrounded. There is just 'Text("Recording")' This got the CPU usage in profiler down to 0%. We saw massive improvements to recording success rate. We walked away assuming that was enough. However we are still seeing the same sort of crashes. All in the background. We're using Observation to drive audio state changes to a Live Activity. Are those Observations causing the problem? Why doesn't apple provide a better API to background audio? The internet is full of weird issues https://stackoverflow.com/questions/76010213/why-is-my-react-native-app-sometimes-terminated-in-the-background-while-tracking https://stackoverflow.com/questions/71656047/why-is-my-react-native-app-terminating-in-the-background-while-recording-ios-r https://github.com/expo/expo/issues/16807 This is such a terrible user experience. And we have very little visibility into what is happening and why. No where in apple documentation states that in order for background recording to work, the app can only be 'Text("Recording")' It does not outline a CPU or memory threshold. It just kills us.

After upgrading to iOS 18.4, I'm no longer able to establish an AirPlay v1 connection to an audio system. The symptom is that the AirPlay route picker just spins when trying to connect to an audio system. It eventually gives up. I tested this on an iPhone 14, connecting to a HomePod, AirPort express, AppleTV and a Wiim Pro. If I try connecting with AirPlay v2, ex: using Apple Music, the connection succeeds and audio can be played. I'm the developer of an app that plays audio over AirPlay while also recording. My app has to use AirPlay v1 because AvAudioSession doesn't allow the policy .longFormAudio when the category is .playAndRecord. This issue is a real pain as it means my app is suddenly broken for many thousands of users. Is anyone else seeing this issue? Any suggestions for a workaround?

Is there a recommended way on macOS 26 Tahoe to take a CoreAudio AudioObjectID and use it to lookup the underlying USB LocationID? I previously used AudioObjectID to query the corresponding DeviceUID with kAudioDevicePropertyDeviceUID. Then I queried for the IOService matching kIOAudioEngineClassName with property kIOAudioEngineGlobalUniqueIDKey matching DeviceUID, and I loaded kUSBDevicePropertyLocationID from the result. This fails on macOS 26, because the IO Registry for the device has an entry for usbaudiod rather than AppleUSBAudioEngine, and usbaudiod does not include a kIOAudioEngineGlobalUniqueIDKey property (or any other property to map it to a CoreAudio DeviceUID). My use-case here is a piece of audio recording software that allows configuring a set of supported audio devices via USB HID prior to recording. I present the user with a list of CoreAudio devices to use, but without a way to lookup the underlying USB LocationID, I cannot guarantee that the configured device matches the selected device (e.g. if the user plugged in two identical microphones).

I have an app under development - demo here - https://youtu.be/VbAfUk_eYl0?si=s6EDBx-4G6P_QbZO - which is sort of an audio player for airdropped files - something useful to musicians who dump work in progress to their phone, make notes, revise and update. I've been testing my handling of audio session interruption notifications, but seems to be a lot of inconsistency in how, when and why iOS delivers them, and I'm wondering if there is some rhyme or reason to it that I'm just not detecting. For example, I am playing a song in my app. Switch to Apple Music and start playing a song there. My app gets an interruption began notification - this is consistent. Switch back to my app, and about half the time, I will get an interruption ended notification (coupled often with a blast of the tail of whatever audio buffer was partially played when the interruption started, even though the engine was stopped - and followed by call to my AVAudioPlayerNodeCompletionCallback - is there some way to avoid this?). Half the time I don't get an interruption ended notification; my app can (as expected) end the interruption by activating the AVAudioSession and playing something. I have not been able to determine any pattern to this behavior, other than that if my app started playing using AVAudioPlayerNode.scheduleSegment rather than scheduleFile I think the notification will be consistently delivered on app activation rather than when I activate the session programmatically. I would like my app to behave deterministically, and would appreciate any help in deciphering what causes the inconsistent behavior in notifications from iOS.

Hi all, I have spent a lot of time reading the tech note and watching the WDDC video that introduce the PTTFramework on iOS. I currently have a custom setup where I am using AVAudioEngine to schedule and play buffers that are being streamed through a call. I am looking to use the PTTFramework to allow a user to trigger this push to talk behavior from the lock screen and the various places with the system UI it provides. However I am unsure what the correct behavior is regarding the handling of the audio session. Right now I am using .playback when there is no active voice transmission so that devices such as AirPods can be in AD2P mode where applicable, and then transitioning to .playbackAndRecord category only when the mic input should become active. Following this change in my AVAudioEngine manager I am then manually activating and deactivating the audio session manually when the engine is either playing/recording or idle. In the documentation it states that you should not attempt to activate or deactivate your audio session directly, but allow the framework to handle it. Does that mean that I need to either call the request to transmit delegate function or set an active participant on the channel manager first, and then wait for the didBecomeActive delegate method to trigger before I actually attempt to play or record any audio? (I am using the fullDuplex mode currently.) I noticed that that delegate method will only trigger if the audio session wasn't active before doing one of the above (setting active participant, requesting transmit). Lastly, when using the PTTFramework it also mentions that we get support for PTT devices and I notice on the didBeginTransmittingFrom property we have a handsfreeButton case. Is there any documentation or resources for what is actually supported out of the box for this? I am currently working on handling a lot of the push to talk through bluetooth LE, and wanted to make sure there wasn't overlap with what the system provides. Thank you!

I have used AVQueuePlayer in my music app to play sequence of audios from a remote server, this how I have defined things my player in my ViewModel Variables private var cancellables = Set() private let audioSession = AVAudioSession.sharedInstance() private var avQueuePlayer: AVQueuePlayer? @Published var playbackSpeed: Float = 1.0 before starting playback, I am making sure that audio session is set properly, the code snippet used for that is do { try audioSession.setCategory(.playback, mode: .default, options: []) try audioSession.setActive(true, options: []) } catch { return } and this is the function I am using to update playback speed func updatePlaybackSpeed(_ newSpeed: Float){ if newSpeed > 0.0, newSpeed <= 2.0{ playbackSpeed = newSpeed avQueuePlayer?.rate = newSpeed print("requested speed is (newSpeed) and actual speed is (String(describing: avQueuePlayer?.rate))") } } sometimes whatever speed is set, player seems to play at the same speed as it was set, e.g. Once I got "requested speed is 1.5 and actual speed is 1.5", and player also seemed to play at the speed of 1.5 but another time I got "requested speed is 2.0 and actual speed is 2.0", but player still seemed to play at the speed of 1.0 to observe changes in rate, I used this **private func observeRateChanges() { guard let avQueuePlayer = self.avQueuePlayer else { return } NotificationCenter.default.publisher(for: AVQueuePlayer.rateDidChangeNotification, object: avQueuePlayer) .compactMap { $0.userInfo?[AVPlayer.rateDidChangeReasonKey] as? AVPlayer.RateDidChangeReason } .sink { reason in switch reason { case .appBackgrounded: print("The app transitioned to the background.") case .audioSessionInterrupted: print("The system interrupts the app’s audio session.") case .setRateCalled: print("The app set the player’s rate.") case .setRateFailed: print("An attempt to change the player’s rate failed.") default: break } } .store(in: &cancellables) }** when rate was set properly, I got this "The app set the player’s rate." from the above function, but when it wasn't, I got this "An attempt to change the player’s rate failed.," now I am not able to understand why rate is not being set, and if it gave "requested speed is 2.0 and actual speed is 2.0" from updatePlaybackSpeed function, why does the player seems to play with the speed of 1.0?

I’m using the shared instance of AVAudioSession. After activating it with .setActive(true), I observe the outputVolume, and it correctly reports the device’s volume. However, after deactivating the session using .setActive(false), changing the volume, and then reactivating it again, the outputVolume returns the previous volume (before deactivation), not the current device volume. The correct volume is only reported after the user manually changes it again using physical buttons or Control Center, which triggers the observer. What I need is a way to retrieve the actual current device volume immediately after reactivating the audio session, even on the second and subsequent activations. Disabling and re-enabling the audio session is essential to how my application functions. I’ve tested this behavior with my colleagues, and the issue is consistently reproducible on iOS 18.0.1, iOS 18.1, iOS 18.3, iOS 18.5 and iOS 18.6.2. On devices running iOS 17.6.1 and iOS 16.0.3, outputVolume correctly reflects the current volume immediately after calling .setActive(true) multiple times.

Hi, I am getting into a trap. Please check stack-trace, howto fix this? regards, Joël stack-trace with ExtAudioFileWrite

I created a virtual audio device to capture system audio with a sample rate of 44.1 kHz. After capturing the audio, I forward it to the hardware sound card using AVAudioEngine, also with a sample rate of 44.1 kHz. However, due to the clock sources being unsynchronized, problems occur after a period of playback. How can I retrieve the clock source of the hardware device and set it for the virtual device?