Hi, when using ApplicationMusicPlayer from MusicKit my app automatically gets the media controls on the lock screen: Play/ Pause, Skip Buttons, Playback Position etc. I would like to customize these. Tried a bunch of things, e.g. using MPRemoteCommandCenter. So far I haven't had any success. Does anyone know how I can customize the media controls of ApplicationMusicPlayer. Thank you.

I'm developing an iOS app that requires continuous audio recording. Currently, when a phone call comes in, the AVAudioSession is interrupted and recording stops completely during the ringing phase. While I understand recording should stop if the call is answered, my app needs to continue recording while the phone is merely ringing. I've observed that Apple's Voice Memos app maintains recording during incoming call rings. This indicates the hardware and iOS are capable of supporting this functionality. Request Please advise on any available AVAudioSession configurations or APIs that would allow my app to: Continue recording during an incoming call ring Only stop recording if/when the call is actually answered Impact This interruption significantly impacts the user experience and core functionality of my app. Workarounds like asking users to enable airplane mode are impractical and create a poor user experience. Questions Is there an approved way to maintain microphone access during call rings? If not currently possible, could this capability be considered for addition to a future iOS SDK? Are there any interim solutions or best practices Apple recommends for this use case? Thank you for your help. SUPPORT INFORMATION Did someone from Apple ask you to submit a code-level support request? No Do you have a focused test project that demonstrates your issue? Yes, I have a focused test project to submit with my request What code level support issue are you having? Problems with an Apple framework API in my app

Hello, I'm trying to receive parquet files using the example that provided in documentation. I've done all required steps but receive constantly error 500 with "Upstream Service Error". By looking into the issues list, seems this error exists for months. Is it possible to get it working?

Issue: Under certain conditions, using CallKit does not automatically enable the microphone. Steps to Reproduce: 1.Start an outgoing call, then the user manually mutes the audio. 2.Receive a native incoming call, end the current call, then answer the new incoming call.(This order is important.) 3.End the incoming call. 4.Start another outgoing call and observe the microphone; do not manually mute or unmute. Actual Behavior: The audio icon indicates that the audio is unmuted, but the microphone remains off, and the small yellow dot in the top status bar (which represents the microphone) does not appear. Expected Behavior: The microphone should be on, consistent with the audio icon display, and the small yellow dot should appear in the top status bar. Device: iPhone 16 pro & iPhone 15 pro, iOS 18.0+ Can it be reproduced using speakerbox(CallKit Demo)? YES

I'm using a 4 channel USB Audio interface, with 4 microphones, and want to process them through 4 independent effect chains. However the output from AVAudioInputNode is a single 4 channel bus. How can I split this into 4 mono busses? The following code splits the input into 4 copies, and routes them through the effects, but each bus contains all four channels. How can I remap the channels to remove the unwanted channels from the bus? I tried using channelMap on the mixer node but that had no effect. I'm currently using this code primarily on iOS but it should be portable between iOS and MacOS. It would be possible to do this through a Matrix Mixer Node, but that seems completely overkill, for such a basic operation. I'm already using a Matrix Mixer to combine the inputs, and it's not well supported in AVAudioEngine. AVAudioInputNode *inputNode=[engine inputNode]; [inputNode setVoiceProcessingEnabled:NO error:nil]; NSMutableArray *micDestinations=[NSMutableArray arrayWithCapacity:trackCount]; for(i=0;i<trackCount;i++) { fixMicFormat[i]=[AVAudioMixerNode new]; [engine attachNode:fixMicFormat[i]]; // And create reverb/compressor and eq the same way... [engine connect:reverb[i] to:matrixMixerNode fromBus:0 toBus:i format:nil]; [engine connect:eq[i] to:reverb[i] fromBus:0 toBus:0 format:nil]; [engine connect:compressor[i] to:eq[i] fromBus:0 toBus:0 format:nil]; [engine connect:fixMicFormat[i] to:compressor[i] fromBus:0 toBus:0 format:nil]; [micDestinations addObject:[[AVAudioConnectionPoint alloc] initWithNode:fixMicFormat[i] bus:0] ]; } AVAudioFormat *inputFormat = [inputNode outputFormatForBus: 1]; [engine connect:inputNode toConnectionPoints:micDestinations fromBus:1 format:inputFormat];

I'm able to get text to speech to audio file using the following code for iOS 12 iPhone 8 to create a car file: audioFile = try AVAudioFile( forWriting: saveToURL, settings: pcmBuffer.format.settings, commonFormat: .pcmFormatInt16, interleaved: false) where pcmBuffer.format.settings is: [AVAudioFileTypeKey: kAudioFileMP3Type, AVSampleRateKey: 48000, AVEncoderBitRateKey: 128000, AVNumberOfChannelsKey: 2, AVFormatIDKey: kAudioFormatLinearPCM] However, this code does not work when I run the app in iOS 18 on iPhone 13 Pro Max. The audio file is created, but it doesn't sound right. It has a lot of static and it seems the speech is very low pitch. Can anyone give me a hint or an answer?

Hi, I am trying to remove the audio controls for my app on the lock screen. Since I use WKWebView, there are 3 audio tags in my html and I play and pause em via JS. However, if I do not play any sound since app launch, there are no audio controls on the lock screen. But if I play one of those 3 files (they are even less then 3 Sec sound effects e.g. for buttons) the audio controls appears on lock screen. Note even when the sounds on pause() or not playing they were listed on the lock screen. What I have tried so far without success MPNowPlayingInfoCenter.default().nowPlayingInfo = [:] and ``try audioSession.setCategory(.playback, mode: .default, options: []) try audioSession.setActive(false, options: .notifyOthersOnDeactivation)`` and UIApplication.shared.endReceivingRemoteControlEvents() Another problem is that the app scales with iOS system settings "display zoom". Is there a way to deny it? It is latest Xcode verion 16.3 and iOS 18. I have no background mode in my Capabilities. Nothing worked so far. Has anyone an idea? Greetings

Overview We are producing audio in real time from an editing application and are trying to put that on an HLS stream. We attempt to submit PCM samples through an audio writer but are getting a crash after a select number of samples have been appended. Depending on the number of audio frames in the PCM buffer, we might get more iterations before the crash but it always has the same traceback (see below). Code The setup is rather simple. We took inspiration from a few sources around the web. NSMutableDictionary *audio = [[NSMutableDictionary alloc] init]; [audio setObject:@(kAudioFormatMPEG4AAC) forKey:AVFormatIDKey]; [audio setObject:[NSNumber numberWithInt:config.audioSampleRate] // 48000 forKey:AVSampleRateKey]; [audio setObject:[NSNumber numberWithInt:config.audioChannels] // 2 forKey:AVNumberOfChannelsKey]; [audio setObject:@160000 forKey:AVEncoderBitRateKey]; m_audioConfig = [[NSDictionary alloc] initWithDictionary:audio]; m_audio = [[AVAssetWriterInput alloc] initWithMediaType:AVMediaTypeAudio outputSettings:m_audioConfig]; AVAudioFrameCount audioFrames = BUFFER_SAMPLES * bCount; AVAudioPCMBuffer *pcmBuffer = [[AVAudioPCMBuffer alloc] initWithPCMFormat:m_full.pcmFormat frameCapacity:audioFrames]; pcmBuffer.frameLength = pcmBuffer.frameCapacity; AudioChannelLayout layout; memset(&layout, 0, sizeof(layout)); layout.mChannelLayoutTag = kAudioChannelLayoutTag_Stereo; CMFormatDescriptionRef format; OSStatus stats = CMAudioFormatDescriptionCreate( kCFAllocatorDefault, pcmBuffer.format.streamDescription, sizeof(layout), &layout, 0, nil, nil, &format ); for (int i = 0; i < bCount; i++) { AudioPCM pcm; audioCallback->callback(pcm); memcpy(*(pcmBuffer.int16ChannelData) + (bufferSize * i), pcm.data, bufferSize); } size_t samplesConsumed = BUFFER_SAMPLES * bCount; CMSampleBufferRef sampleBuffer; CMSampleTimingInfo timing; timing.duration = CMTimeMake(1, config.audioSampleRate); timing.presentationTimeStamp = presentationTime; timing.decodeTimeStamp = kCMTimeInvalid; OSStatus ostatus = CMSampleBufferCreate( kCFAllocatorDefault, nil, false, nil, nil, format, (CMItemCount)pcmBuffer.frameLength, 1, &timing, 0, nil, &sampleBuffer ); //// ostatus = CMSampleBufferSetDataBufferFromAudioBufferList( sampleBuffer, kCFAllocatorDefault, kCFAllocatorDefault, kCMSampleBufferFlag_AudioBufferList_Assure16ByteAlignment, pcmBuffer.audioBufferList ); if (ostatus != noErr) { NSLog(@"fill audio sample from buffer list failed: %s", logAudioError(ostatus)); return; } ostatus = CMSampleBufferSetDataReady(sampleBuffer); if (ostatus != noErr) { NSLog(@"set sample buffer ready failed: %s", logAudioError(ostatus)); return; } // Finally we can attach it, then shove the presentation time forward [m_audio appendSampleBuffer:sampleBuffer]; The Crash The crash points towards some level of deallocation when the conversion tooling is done or has enough samples to process an output packet? It's had to say. 0 caulk 0x1a1e9532c caulk::alloc::tiered_allocator<caulk::alloc::size_range_tier<0ul, 1008ul, caulk::alloc::tree_allocator<caulk::alloc::chunk_allocator<caulk::alloc::page_allocator, caulk::alloc::bitmap_allocator, caulk::alloc::embed_block_memory, 16384ul, 16ul, 6ul>>>, caulk::alloc::size_range_tier<1009ul, 256000ul, caulk::alloc::guarded_edges_allocator<caulk::alloc::consolidating_free_map<caulk::alloc::page_allocator, 10485760ul>, 4ul>>, caulk::alloc::tracking_allocator<caulk::alloc::page_allocator>>::deallocate(caulk::alloc::block, unsigned long) + 636 1 AudioToolboxCore 0x1993fbfe4 ExtendedAudioBufferList_Destroy + 112 2 AudioToolboxCore 0x1993d5fe0 std::__1::__optional_destruct_base<ACCodecOutputBuffer, false>::~__optional_destruct_base[abi:ne180100]() + 68 3 AudioToolboxCore 0x1993d5f48 acv2::CodecConverter::~CodecConverter() + 196 4 AudioToolboxCore 0x1993d5e5c acv2::CodecConverter::~CodecConverter() + 16 5 AudioToolboxCore 0x1992574d8 std::__1::vector<std::__1::unique_ptr<acv2::AudioConverterBase, std::__1::default_delete<acv2::AudioConverterBase>>, std::__1::allocator<std::__1::unique_ptr<acv2::AudioConverterBase, std::__1::default_delete<acv2::AudioConverterBase>>>>::__clear[abi:ne180100]() + 84 6 AudioToolboxCore 0x199259acc acv2::AudioConverterChain::RebuildConverterChain(acv2::ChainBuildSettings const&) + 116 7 AudioToolboxCore 0x1992596ec acv2::AudioConverterChain::SetProperty(unsigned int, unsigned int, void const*) + 1808 8 AudioToolboxCore 0x199324acc acv2::AudioConverterV2::setProperty(unsigned int, unsigned int, void const*) + 84 9 AudioToolboxCore 0x199327f08 with_resolved(OpaqueAudioConverter*, caulk::function_ref<int (AudioConverterAPI*)>) + 60 10 AudioToolboxCore 0x1993281e4 AudioConverterSetProperty + 72 11 MediaToolbox 0x1a7566c2c FigSampleBufferProcessorCreateWithAudioCompression + 2296 12 MediaToolbox 0x1a754db08 0x1a70b5000 + 4819720 13 MediaToolbox 0x1a754dab4 FigMediaProcessorCreateForAudioCompressionWithFormatWriter + 100 14 MediaToolbox 0x1a77ebb98 0x1a70b5000 + 7564184 15 MediaToolbox 0x1a7804158 0x1a70b5000 + 7663960 16 MediaToolbox 0x1a7801da0 0x1a70b5000 + 7654816 17 AVFCore 0x1ada530c4 -[AVFigAssetWriterTrack addSampleBuffer:error:] + 192 18 AVFCore 0x1ada55164 -[AVFigAssetWriterAudioTrack _flushPendingSampleBuffersReturningError:] + 500 19 AVFCore 0x1ada55354 -[AVFigAssetWriterAudioTrack addSampleBuffer:error:] + 472 20 AVFCore 0x1ada4ebf0 -[AVAssetWriterInputWritingHelper appendSampleBuffer:error:] + 128 21 AVFCore 0x1ada4c354 -[AVAssetWriterInput appendSampleBuffer:] + 168 22 lib_devapple_hls.dylib 0x115d2c7cc detail::AppleHLSImplementation::audioRuntime() + 1052 23 lib_devapple_hls.dylib 0x115d2d094 void* std::__1::__thread_proxy[abi:ne180100]<std::__1::tuple<std::__1::unique_ptr<std::__1::__thread_struct, std::__1::default_delete<std::__1::__thread_struct>>, void (detail::AppleHLSImplementation::*)(), detail::AppleHLSImplementation*>>(void*) + 72 24 libsystem_pthread.dylib 0x196e5b2e4 _pthread_start + 136 Any insight would be welcome!

Hi all, I have spent a lot of time reading the tech note and watching the WDDC video that introduce the PTTFramework on iOS. I currently have a custom setup where I am using AVAudioEngine to schedule and play buffers that are being streamed through a call. I am looking to use the PTTFramework to allow a user to trigger this push to talk behavior from the lock screen and the various places with the system UI it provides. However I am unsure what the correct behavior is regarding the handling of the audio session. Right now I am using .playback when there is no active voice transmission so that devices such as AirPods can be in AD2P mode where applicable, and then transitioning to .playbackAndRecord category only when the mic input should become active. Following this change in my AVAudioEngine manager I am then manually activating and deactivating the audio session manually when the engine is either playing/recording or idle. In the documentation it states that you should not attempt to activate or deactivate your audio session directly, but allow the framework to handle it. Does that mean that I need to either call the request to transmit delegate function or set an active participant on the channel manager first, and then wait for the didBecomeActive delegate method to trigger before I actually attempt to play or record any audio? (I am using the fullDuplex mode currently.) I noticed that that delegate method will only trigger if the audio session wasn't active before doing one of the above (setting active participant, requesting transmit). Lastly, when using the PTTFramework it also mentions that we get support for PTT devices and I notice on the didBeginTransmittingFrom property we have a handsfreeButton case. Is there any documentation or resources for what is actually supported out of the box for this? I am currently working on handling a lot of the push to talk through bluetooth LE, and wanted to make sure there wasn't overlap with what the system provides. Thank you!

After upgrading to iOS 18.4, I'm no longer able to establish an AirPlay v1 connection to an audio system. The symptom is that the AirPlay route picker just spins when trying to connect to an audio system. It eventually gives up. I tested this on an iPhone 14, connecting to a HomePod, AirPort express, AppleTV and a Wiim Pro. If I try connecting with AirPlay v2, ex: using Apple Music, the connection succeeds and audio can be played. I'm the developer of an app that plays audio over AirPlay while also recording. My app has to use AirPlay v1 because AvAudioSession doesn't allow the policy .longFormAudio when the category is .playAndRecord. This issue is a real pain as it means my app is suddenly broken for many thousands of users. Is anyone else seeing this issue? Any suggestions for a workaround?

My current app implements a custom video player, based on a AVSampleBufferRenderSynchronizer synchronising two renderers: an AVSampleBufferDisplayLayer receiving decoded CVPixelBuffer-based video CMSampleBuffers, and an AVSampleBufferAudioRenderer receiving decoded lpcm-based audio CMSampleBuffers. The AVSampleBufferRenderSynchronizer is started when the first image (in presentation order) is decoded and enqueued, using avSynchronizer.setRate(_ rate: Float, time: CMTime), with rate = 1 and time the presentation timestamp of the first decoded image. Presentation timestamps of video and audio sample buffers are consistent, and on most streams, the audio and video are correctly synchronized. However on some network streams, on iOS, the audio and video aren't synchronized, with a time difference that seems to increase with time. On the other hand, with the same player code and network streams on macOS, the synchronization always works fine. This reminds me of something I've read, about cases where an AVSampleBufferRenderSynchronizer could not synchronize audio and video, causing them to run with independent and potentially drifting clocks, but I cannot find it again. So, any help / hints on this sync problem will be greatly appreciated! :)

Hello everyone, I'm implementing the new AVInputPickerInteraction API on iOS 26 to allow users to select their microphone from a custom settings menu before recording. The implementation seems correct, but I'm encountering a strange issue where the input selection immediately reverts to the previous device. The Situation: The picker is presented correctly via a manual call to .present(). I can see all available inputs (e.g., "iPhone Microphone" and "AirPods"). The current input is "iPhone Microphone". I tap on "AirPods". The UI updates to show "AirPods" as selected for a fraction of a second, then immediately jumps back to "iPhone Microphone". The same thing happens in reverse. It seems like the system is automatically reverting the audio route change requested by the picker. My Implementation: My setup follows the standard pattern discussed in the WWDC sessions. Setup Code: This setup is performed once before the user can trigger the picker. @available(iOS 26.0, *) var inputPickerInteraction: AVInputPickerInteraction? // Note: The AVAudioSession is configured to .playAndRecord // and set to active elsewhere in the code before this setup is called. if #available(iOS 26.0, *) { // Setup the picker let picker = AVInputPickerInteraction() self.inputPickerInteraction = picker self.view.addInteraction(picker) // Added to establish context } Presentation Code: When a user selects "Change Input" from my custom settings menu, I call .present() on the main thread. // In a delegate method from a custom menu if #available(iOS 26.0, *) { DispatchQueue.main.async { self.inputPickerInteraction?.present(animated: true) } } What I've already checked: The AVAudioSession is active and its category is .playAndRecord. The inputPickerInteraction object is not nil. The .present() method is being called on the main thread. The picker is added to a view using view.addInteraction() in the setup phase. I've reviewed my code to ensure there is no other logic that could be manually resetting the AVAudioSession's preferred input. Has anyone else experienced this behavior? I suspect this might be a bug in the new API, but I want to make sure I'm not missing a crucial step in managing the AVAudioSession state. Any insights or potential workarounds would be greatly appreciated. Thank you.

Hello, We are developing a real-time speech recognition application and are utilizing AVAudioEngine with voice processing enabled on the input node. However, we have observed that enabling this mode interferes with the built-in iOS screen recording feature - specifically, the recorded video does not capture any audio when this mode is active. Since we want users to be able to record their experience within our app, this issue significantly impacts our functionality. Is there a known workaround or recommended approach to ensure that both voice processing and screen recording can function simultaneously? Any guidance would be greatly appreciated. Thank you!

Hi everyone, I’m working on an iOS MusicKit app that overlays a metronome on top of Apple Music playback. To line the clicks up perfectly I’d like access to low-level audio analysis data—ideally a waveform / spectrogram or beat grid—while the track is playing. I’ve noticed that several approved DJ apps (e.g. djay, Serato, rekordbox) can already: • Display detailed scrolling waveforms of Apple Music songs • Scratch, loop or time-stretch those tracks in real time That implies they receive decoded PCM frames or at least high-resolution analysis data from Apple Music under a special entitlement. My questions: 1. Does MusicKit (or any public framework) expose real-time audio buffers, FFT bins, or beat markers for streaming Apple Music content? 2. If not, is there an Apple program or entitlement that developers can apply for—similar to the “DJ with Apple Music” initiative—to gain that deeper access? 3. Where can I find official documentation or a point of contact for this kind of request? I’ve searched the docs and forums but only see standard MusicKit playback APIs, which don’t appear to expose raw audio for DRM-protected songs. Any guidance, links or insider tips on the proper application process would be hugely appreciated! Thanks in advance.

Hi all! I have been experiencing some issues when using the AVAudioEngine to play audio and record input while doing a voice chat (through the PTT Interface). I noticed if I connect any players to the AudioGraph OR call start that the audio session becomes active (this is on iOS). I don't see anything in the docs or the header files in the AVFoundation, but is it possible that calling the stop method on an engine deactivates the audio session too? In a normal app this behavior seems logical, but when using PTT all activation and deactivation of the audio session must go through the framework and its delegate methods. The issue I am debugging is that when the engine with the input node tapped gets stopped, and there is a gap between the input and when the server replies with inbound audio to be played and something seems to be getting the hardware/audio session into a jammed state. Thanks for any feedback and/or confirmation on this behavior!

I am using an AVAudioPlayer to play a "tick" sound once per second in a SwiftUI app. When running the app on an iPhone 16 (18.2.1) the tick sounds increase in volume after a few seconds. This does not happen in the simulator nor on an iPhone SE 2020 (18.1.1).

I'm developing the VisionOS app. I want to know how to play spatial audio in addition to RealityKit? If it's iOS or macOS, how to play spatial audio in addition to RealityKit?

Bug Report: ScreenCaptureKit System Audio Capture Crashes with EXC_BAD_ACCESS Summary When using ScreenCaptureKit to capture system audio for extended periods, the application crashes with EXC_BAD_ACCESS in Swift's error handling runtime. The crash occurs in swift_getErrorValue when trying to process an error from the SCStream delegate method didStopWithError. This appears to be a framework-level issue in ScreenCaptureKit or its underlying ReplayKit implementation. Environment macOS Sonoma 14.6.1 Swift 5.8 ScreenCaptureKit framework Detailed Description Our application captures system audio using ScreenCaptureKit's audio capture capabilities. After successfully capturing for several minutes (typically after 3-4 segments of 60-second recordings), the application crashes with an EXC_BAD_ACCESS error. The crash happens when the Swift runtime attempts to process an error in the SCStreamDelegate.stream(_:didStopWithError:) method. The crash consistently occurs in swift_getErrorValue when attempting to access the class of what appears to be a null object. This suggests that the error being passed from the system framework to our delegate method is malformed or contains invalid memory. Steps to Reproduce Create an SCStream with audio capture enabled Add audio output to the stream Start capture and write audio data to disk Allow the capture to run for several minutes (3-5 minutes typically triggers the issue) The app will crash with EXC_BAD_ACCESS in swift_getErrorValue Code Sample func stream(_ stream: SCStream, didStopWithError error: Error) { print("Stream stopped with error: \(error)") // Crash occurs before this line executes } func stream(_ stream: SCStream, didOutputSampleBuffer sampleBuffer: CMSampleBuffer, of type: SCStreamOutputType) { guard type == .audio, sampleBuffer.isValid else { return } // Process audio data... } Expected Behavior The error should be properly propagated to the delegate method, allowing for graceful error handling and recovery. Actual Behavior The application crashes with EXC_BAD_ACCESS when the Swift runtime attempts to process the error in swift_getErrorValue. Crash Log Details Thread #35, queue = 'com.apple.NSXPCConnection.m-user.com.apple.replayd', stop reason = EXC_BAD_ACCESS (code=1, address=0x0) frame #0: 0x0000000194c3088c libswiftCore.dylib`swift::_swift_getClass(void const*) + 8 frame #1: 0x0000000194c30104 libswiftCore.dylib`swift_getErrorValue + 40 frame #2: 0x00000001057fba30 shadow`NewScreenCaptureService.stream(stream=0x0000600002de6700, error=Swift.Error @ 0x000000016b7b5e30) at NEW+ScreenCaptureService.swift:365:15 frame #3: 0x00000001057fc050 shadow`@objc NewScreenCaptureService.stream(_:didStopWithError:) at <compiler-generated>:0 frame #4: 0x0000000219ec5ca0 ScreenCaptureKit`-[SCStreamManager stream:didStopWithError:] + 456 frame #5: 0x00000001ca68a5cc ReplayKit`-[RPScreenRecorder stream:didStopWithError:] + 84 frame #6: 0x00000001ca696ff8 ReplayKit`-[RPDaemonProxy stream:didStopWithError:] + 224 Printing description of stream._streamQueue: error: ObjectiveC.id:4294967281:18: note: 'id' has been explicitly marked unavailable here public typealias id = AnyObject ^ error: /var/folders/v4/3xg1hmp93gjd8_xlzmryf_wm0000gn/T/expr23-dfa421..cpp:1:65: 'id' is unavailable in Swift: 'id' is not available in Swift; use 'Any' Swift._DebuggerSupport.stringForPrintObject(Swift.UnsafePointer<id>(bitPattern: 0x104ae08c0)!.pointee) ^~ ObjectiveC.id:2:18: note: 'id' has been explicitly marked unavailable here public typealias id = AnyObject ^ warning: /var/folders/v4/3xg1hmp93gjd8_xlzmryf_wm0000gn/T/expr23-dfa421..cpp:5:7: initialization of variable '$__lldb_error_result' was never used; consider replacing with assignment to '_' or removing it var $__lldb_error_result = __lldb_tmp_error ~~~~^~~~~~~~~~~~~~~~~~~~ _ Before the crash, we observed this error message in the console: [ERROR] *****SCStream*****RemoteAudioQueueOperationHandlerWithError:1015 Error received from the remote queue -16665 Additional Context The issue occurs consistently after approximately 3-4 successful audio segment recordings of 60 seconds each Commenting out custom segment rotation logic does not prevent the crash The crash involves XPC communication with Apple's ReplayKit daemon The error appears to be corrupted or malformed when crossing the XPC boundary Workarounds Attempted Added proper thread safety for all published properties using DispatchQueue.main.async Implemented more robust error handling in the delegate methods None of these approaches prevented the crash since it occurs at the Swift runtime level before our code executes. Impact This issue prevents reliable long-duration audio capture using ScreenCaptureKit. This bug significantly limits the usefulness of ScreenCaptureKit for any application requiring continuous system audio capture for more than a few minutes. Perhaps this issue might be related to a macOS bug where the system dialog indicates that the screen is being shared, even though nothing is actually being shared. Moreover, when attempting to stop sharing, nothing happens.

Hi all, with my app ScreenFloat, you can record your screen, along with system- and microphone audio. Those two audio feeds are recorded into separate audio tracks in order to individually remove or edit them later on. Now, these recordings you create with ScreenFloat can be drag-and-dropped to other apps instantly. So far, so good, but some apps, like Slack, or VLC, or even websites like YouTube, do not play back multiple audio tracks, just one. So what I'm trying to do is, on dragging the video recording file out of ScreenFloat, instantly baking together the two individual audio tracks into one, and offering that new file as the drag and drop file, so that all audio is played in the target app. But it's slow. I mean, it's actually quite fast, but for drag and drop, it's slow. My approach is this: "Bake together" the two audio tracks into a one-track m4a audio file using AVMutableAudioMix and AVAssetExportSession Take the video track, add the new audio file as an audio track to it, and render that out using AVAssetExportSession For a quick benchmark, a 3'40'' movie, step 1 takes ~1.7 seconds, and step two adds another ~1.5 seconds, so we're at ~3.2 seconds. That's an eternity for a drag and drop, where the user might cancel if there's no immediate feedback. I could also do it in one step, but then I couldn't use the AV*Passthrough preset, and that makes it take around 32 seconds then, because I assume it touches the video data (which is unnecessary in this case, so I think the two-step approach here is the fastest). So, my question is, is there a faster way? The best idea I can come up with right now is, when initially recording the screen with system- and microphone audio as separate tracks, to also record both of them into a third, muted, "hidden" track I could use later on, basically eliminating the need for step one and just ripping the two single audio tracks out of the movie and only have the video and the "hidden" track (then unmuted), but I'd still have a ~1.5 second delay there. Also, there's the processing and data overhead (basically doubling the movie's audio data). All this would be great for an export operation (where one expects it to take a little time), but for a drag-and-drop operation, it's not ideal. I've discarded the idea of doing a promise file drag, because many apps do not accept those, and I want to keep wide compatibility with all sorts of apps. I'd appreciate any ideas or pointers. Thank you kindly, Matthias

I have some tried-and-tested code that records and plays back audio via AUHAL which breaks on Tahoe on Intel. The same code works fine on Sequioa and also works on Tahoe on Apple Silicon. To start with something simple, the following code to request access to the Microphone doesn't work as it should: bool RequestMicrophoneAccess () { __block AVAuthorizationStatus status = [AVCaptureDevice authorizationStatusForMediaType: AVMediaTypeAudio]; if (status == AVAuthorizationStatusAuthorized) return true; __block bool done = false; [AVCaptureDevice requestAccessForMediaType: AVMediaTypeAudio completionHandler: ^ (BOOL granted) { status = (granted) ? AVAuthorizationStatusAuthorized : AVAuthorizationStatusDenied; done = true; }]; while (!done) CFRunLoopRunInMode (kCFRunLoopDefaultMode, 2.0, true); return status == AVAuthorizationStatusAuthorized; } On Tahoe on Intel, the code runs to completion but granted is always returned as NO. Tellingly, the popup to ask the user to grant microphone access is never displayed, even though the app is not present in the Privacy pane and never appears there. On Apple Silicon, everything works fine. There are some other problems, but I'm hoping they have a common underlying cause and that the Apple guys can figure out what's wrong from the information in this post. I'd be happy to test any potential fix. Thanks.