Is the pseudocode below thread-safe? Imagine that the Main thread sets the CAMetalLayer's drawableSize to a new size meanwhile the rendering thread is in the middle of rendering into an existing MTLDrawable which does still have the old size. Is the change of metalLayer.drawableSize thread-safe in the sense that I can present an old MTLDrawable which has a different resolution than the current value of metalLayer.drawableSize? I assume that setting the drawableSize property informs Metal that the next MTLDrawable offered by the CAMetalLayer should have the new size, right? Is it valid to assume that "metalLayer.drawableSize = newSize" and "metalLayer.nextDrawable()" are internally synchronized, so it cannot happen that metalLayer.nextDrawable() would produce e.g. a MTLDrawable with the old width but with the new height (or a completely invalid resolution due to potential race conditions)? func onWindowResized(newSize: CGSize) { // Called on the Main thread metalLayer.drawableSize = newSize } func onVsync(drawable: MTLDrawable) { // Called on a background rendering thread renderer.renderInto(drawable: drawable) }

Hi all, Wondering how I would go about creating a plugin/class to support a new (physical/hardware) device with the game controller framework? Between GCVirtualController on iOS and the "KeyboardAndMouseSupport.bundle" I see inside GameController.framework on my Mac, it looks like the framework must be designed to support this but I can't find any documentation. Thanks!

I have something like this drawing in an MTKView (see at bottom). I am finding it difficult to figure out when can the Swift-land resources used in making the MTLBuffer(s) be released? Below, for example, is it ok if args goes out of scope (or is otherwise deallocated) at point 1, 2, or 3? Or perhaps even earlier, as soon as argsBuffer has been created? I have been reading through various articles such as Setting resource storage modes Choosing a resource storage mode for Apple GPUs Copying data to a private resource but it's a lot to absorb and I haven't been really able to find an authoritative description of the required lifetime of the resources in CPU land. I should mention that this is Metal 4 code. In previous versions of Metal, the MTLCommandBuffer had the ability to add a completion handler to be called by the GPU after it has finished running the commands in the buffer but in Metal 4 there is no such thing (it it were even needed for the purpose I am interested in). Any advice and/or pointers to the definitive literature will be appreciated. guard let argsBuffer = device.makeBuffer(bytes: &args,... argumentTable.setAddress(argsBuffer.gpuAddress, ... encoder.setArgumentTable(argumentTable, stages: .vertex) // encode drawing renderEncoder.draw... ... encoder.endEncoding() // 1 commandBuffer.endCommandBuffer() // 2 commandQueue.waitForDrawable(drawable) commandQueue.commit([commandBuffer]) // 3 commandQueue.signalDrawable(drawable) drawable.present()

Hi, I'm trying to set the displayScale environment value for a RealityView, so it renders at 2x instead of 3x on the iPhone, but it seems to have no effect. .environment(\.displayScale, 2.0) Is this expected behavior, or a bug? The reason I want it to render at 2x and not at the default 3x is for game optimization and performance.

Dear Apple Color Management Team, I’m a professional visual creator working on color-critical photo and graphic projects using macOS (currently 26.1 Tahoe). In recent macOS releases, LUT-based ICC display profiles (such as XYZ LUT + Matrix types generated by DisplayCAL or professional spectrophotometers) can no longer be installed or activated via ColorSync. This limitation significantly affects professional workflows in photography, graphic design, prepress, and video color grading — fields that rely on precise display profiling. The current workaround (converting LUT profiles to simple shaper/matrix ICC v2) results in less accurate tone response and color reproduction, particularly in the dark range and wide-gamut displays. I kindly request Apple to restore or re-enable the ability to install and use ICC v2/v4 LUT-based display profiles under ColorSync, as was possible on macOS Monterey and Ventura. This would allow professionals to continue using trusted calibration tools such as DisplayCAL, X-Rite i1Profiler, and Calibrite Profiler to achieve accurate color management. macOS is widely used in professional creative industries, and restoring this feature would be a huge help for countless photographers, designers, and colorists. Thank you for your attention and commitment to professional users. Best regards, Richárd Deutsch Professional Photographer https://riccio.hu/ MacBook Pro (M4 Pro, macOS 26.1)

Hello, **I'm Using ** Unity 6 LTS Unity Apple GameKit + Core plugins Turn-based matchmaking interface w/ 2 players max App Store Connect API for rule-based matchmaking I have already enabled game center in app store connect (I think) authenticated players and matched via friend request I am stuck Using queues to match players automatically I'm working on a rule-based matchmaking system which aims to place two players against each other into a GKTurnBasedMatch. I have a simple Unity Project that correctly authenticates a user and proceeds to send a matchmaking request. The matchmaking script utilizes the Unity plugins' GKTurnBasedMatchmakerViewController.Request(...) request function with a GKMatchRequest.Init() request configured with a QueueName equal to the App Store Connect API Queue I created. The queue I created is also linked to a ruleset with a very basic rule that checks if the properties contains a key called 'preference' that contains a string value for what side the player wants to play for this match. If during the matchmaking, the preferences between players are different, then the match is made and both players should join the match; each player gets to play the side they have chosen. I have my rule expression designed to just check if the preferences are not equal: requests[0].properties.faction_preference != requests[1].properties.faction_preference When I launch the game with two physical iPads and begin the matchmaking request, each player is immediately presented with two options: Invite a friend, or Start game The Problem: Inviting a friend works to get two players into a game, but queue seems to not matter, and clicking start game will just put the current player into its own match (no one joins). The Question: How do I get queue based matchmaking to work in Unity for a Turn-based match with only two players who are able to select the enemy side they want to play dictated by a rule that compares enemy play-side preferences? Resources I've used: Apple Unity GameKit Plugin: https://github.com/apple/unityplugins Matchmaking: https://developer.apple.com/documentation/gamekit/matchmaking-rules Multiplayer rulesets: https://developer.apple.com/documentation/gamekit/finding-players-using-matchmaking-rules

We have a released game in the App Store with Game Center Challenges. The challenges were working well in testing of the final version before the Game Center challenges went live. After release the activity that should take the player to the challenge in game results in this printout and we do not get informed by GKGameActivityListener of the activity happening in our code as we did before the Game Center challenges went live. “Invalid game activity definition. Failed to kick activity notification to GameKit. Error: Error Domain=GKErrorDomain Code=17 "(null)"” Also, Game Center reports that the are no challenges in GKChallengeDefinition.all even though there are ongoing challenges. The leaderboard results do get reported to Game Center though and show up as challenge entries in the Games app. At the moment we are trying to figure out if this is a problem on our end or a Game Center server issue.

Added achievements to my approved app. Added them for the next release version, which I am running in simulator. When I look at the Achievements page, I can see that there are 17 Achievements available (correct), but they all show as hidden, despite checking the "No" box in App Store Connect.

I work on a Qt/QML app that uses Esri Maps SDK for Qt and that is deployed to both Windows and iPads. With a recent iPad OS upgrade to 26.1, many iPad users are reporting the application freezing after panning and/or identifying features in the map. It runs fine for our Windows users. I was able to reproduce this and grabbed the following error messages when the freeze happens: IOGPUMetalError: Caused GPU Address Fault Error (0000000b:kIOGPUCommandBufferCallbackErrorPageFault) IOGPUMetalError: Invalid Resource (00000009:kIOGPUCommandBufferCallbackErrorInvalidResource) Environment: Qt 6.5.4 (Qt for iOS) Esri Maps SDK for Qt 200.3 iPadOS 26.1 Because it appears to be a Metal error, I tried using OpenGL (Qt offers a way to easily set hte target graphics api): QQuickWindow::setGraphicsApi(QSGRendererInterface::GraphicsApi::OpenGL) Which worked! No more freezing. But I'm seeing many posts that OpenGL has been deprecated by Apple. I've seen posts that Apple deprecated OpenGL ES. But it seems to still be available with iPadOS 26.1. If so, will this fix (above) just cause problems with a future iPadOS update? Any other suggestions to address this issue? Upgrading our version of Qt + Esri SDK to the latest version is not an option for us. We are in the process to upgrade the full application, but it is a year or two out. So, we just need a fix to buy us some time for now. Appreciate any thoughts/insights....

Hi Apple team, Game Mode was introduced in iOS 18. To activate Game Mode, an app must include specific key-value pairs in its *.plist and be categorized as a "Game" on the App Store. My app (https://apps.apple.com/us/app/voidlink/id6747717070) works primarily as a self-hosted game streaming (PC->iPhone/iPad) client. Game Mode provides clear benefits in terms of latency and frame rate stability, but it can currently only be activated when running via Xcode or TestFlight. I am an individual iOS developer based in China, where an additional government license is required for apps to be listed under the "Game" category on the App Store. Obtaining such a license is very difficult for independent developers, so my app has been categorized under "Utilities" instead.(If move the app to game category, it will disappear from Chinese App Store immediately) Expectation / Suggestion: Please consider making Game Mode available as a local, user-controllable option on iOS18/26+, such as through a system “App Pool” where users can choose which apps to enable Game Mode for, regardless of App Store category. This would greatly benefit use cases like streaming clients, benchmarking tools, and remote play utilities, without requiring developers to reclassify their apps as “Games” on App Store.

Has anyone come across the issue that setting GKLocalPlayer.local.authenticateHandler breaks a RealityView's world tracking on iOS / iPadOS 18 beta 5? I'm in the process of upgrading my app to make use of the much appreciated RealityView unification, using RealityView not only on visionOS but now also on iOS and iPadOS. In my RealityView, I enable world tracking on iOS like this: content.camera = .worldTracking However, device position and orientation were ignored (the camera remained static) and there was no camera pass-through. Then I discovered that the issue disappeared when I remove the line GKLocalPlayer.local.authenticateHandler = { viewController, error in // ... some more code ... } So I filed FB14731139 and hope that it will be resolved before the release of iOS / iPadOS 18.

Hello - Upon enabling debug mode for GameKit configuration for my iOS app, I do not see any devices (my iPhone or simulators) in the device list within the "Manage Game Progress" debug tool. I only see my Mac as a device. Is there any trick to this or a way to add devices to this list? Thank you

When running my game in the Unity Editor on Windows platform I get an error: DllNotFoundException: GameKitWrapper assembly:<unknown assembly> type:<unknown type> member:(null) Apple.GameKit.DefaultNSErrorHandler.Init () (at ./Library/PackageCache/com.apple.unityplugin.gamekit@0abcad546f73/Source/DefaultHandlers.cs:35) This is because GameKitWrapper dynamically linked library is not available under Windows platform. Besides, "Apple Build Settings" are declared under UNITY_EDITOR_OSX and also not available under Windows platform. Does anyone managed to solve this?

I’m trying to use EXR lightmaps to overlay baked lighting on top of a base texture in the RCP Shader Graph. When I multiply an EXR image set to Image(float) with an 8-bit base texture, the output becomes Image(float). I can’t connect that to the BaseColor input on the UnlitSurface node, since it only accepts Color3f. I expected to be able to use a Convert node between the Multiply node and the BaseColor input, but when I do that, the result becomes black and white instead of the expected outcome: the EXR multiplied with the base texture using a baseline value of 1, where values below 1 in the EXR would darken the base texture and values above 1 would brighten it. Is there any documentation on how to properly overlay a 32-bit EXR lightmap in the RCP Shader Graph, or is the black-and-white output from the Convert node a bug?

Hi all, I've encountered a potential issue with how the winding order of geometry is handled when their transformations involve negative scaling. I created a simple test asset, a single triangle, to demonstrate this. The triangle's vertices are defined in a counter-clockwise ("right-handed") winding order, and its transform has a negative scale on the X-axis. According to the OpenUSD specification, this negative determinant in the transformation matrix should effectively reverse the winding order of the geometry: However, any given gprim's local-to-world transformation can flip its effective orientation, when it contains an odd number of negative scales. This condition can be reliably detected using the (Jacobian) determinant of the local-to-world transform: if the determinant is less than zero, then the gprim's orientation has been flipped, and therefore one must apply the opposite handedness rule when computing its surface normals (or just flip the computed normals) for the purposes of hidden surface detection and lighting calculations. When I view the asset in tools like Blender or Preview on macOS, it behaves as expected. The triangle's effective orientation is flipped to CW. However, when the same asset is viewed in Reality Composer Pro or with QuickLook on iOS, its effective orientation remains CCW. In other words, the triangle faces the opposite direction. My questions for the community and Apple are: Is this behavior in RealityKit a known issue? If this is a known issue, is there official guidance for DCC tools on how to export USDZ assets to ensure they appear correctly in the Apple ecosystem? Any insights or recommendations would be greatly appreciated.

For an app of mine I use CGSetDisplayTransferByTable to adjust the gamma table of the device. Since macOS Tahoe, these modifications are silently ignored. The display's actual gamma curve remains unchanged despite the API reporting successful completion. I've filed a FB for it a few weeks ago, and would love to figure out what could be causing this. FB18559786

I have an app that uses GameController to read the inputs of a connected JoyCon. However, the controller also interacts with the OS. For example, when I press the Home button on the controller, it brings me to the home of my Vision Pro. Is it possible to disable this interaction while still being able to read the controller inputs inside my app?

Hello everyone, I'm working on a visionOS application using RealityKit and am encountering a common coordinate system challenge when integrating 3D models created in Blender. My goal is to display and dynamically update the Transform (position, rotation, scale) of models created in Blender within RealityKit. The issue arises because Blender's default coordinate system is Z-up, and while exporting to USD/USDZ, I don't have a reliable "Y-up" export option that correctly reorients the model and its transform data for RealityKit's Y-up convention. This means I'm essentially exporting models with their "up" direction along the Z-axis. When I load these Z-up exported models into RealityKit, they are often oriented incorrectly. To then programmatically update their Transform (e.g., move them, rotate them based on game logic, or apply physics), I need to ensure that the Transform values I set align with RealityKit's Y-up system, even though the original model data was authored in a Z-up context. My questions are: What is the recommended transformation process (e.g., using simd_quatf or simd_float4x4) to convert a Transform that was conceptually defined in a Z-up coordinate system to RealityKit's Y-up coordinate system? Specifically, when I have a Transform (or its translation, rotation, scale components) from a Z-up context, how should I apply this to a RealityKit Entity so it appears and behaves correctly in a Y-up world? Are there any existing convenience APIs or helper functions within RealityKit, simd, or other Apple frameworks that simplify this Z-up to Y-up Transform conversion process? Or is a manual application of a transformation quaternion (e.g., simd_quatf(angle: -.pi / 2, axis: [1, 0, 0])) the standard approach? Any guidance, code examples, or best practices from those who have faced similar challenges would be greatly appreciated! Thank you.

Hi, I'm Beginner with Metal 4 and Model I/O 🥺. I can render simple models with just one mesh, but when I try to render models with SubMeshes, nothing shows up on screen. Can anyone help me figure out how to properly render models with multiple submeshes? I think I'm not iterating through them correctly or maybe missing some buffers setup. Here's what I have so far: https://www.icloud.com.cn/iclouddrive/0a6x_NLwlWy-herPocExZ8g3Q#LoadModel

I use unity 2020.3.48f1 to develop a game; trying to implement Apple Services integration I use Apple unity plugins(https://github.com/apple/unityplugins) Using latest version of unity plugins I getting error in Unity project after plugin import It say "Not allowed platform VisionOS" When I tryed to use older version of the plugins I getting error on runtime when calling "var fetchItemsResponse = await GKLocalPlayer.Local.FetchItems();" in line 42 it drop EXC_BAD_ACCESS(code=257, address=0x0000...) error I tryed to use different commits from official repositorys and even custom branches of apple unity plugins like (https://github.com/muZZkat/unityplugins/tree/muzzkat/fix-fetch-items) but it did not help There is whole my script which trying to use apple unuity plugins using System.Threading.Tasks; using UnityEngine; using System.Collections; using System; using Apple.GameKit; using UnityEngine.UI; public class TheScript : MonoBehaviour { [SerializeField] InputField otp; string Signature; string TeamPlayerID; string Salt; string PublicKeyUrl; string Timestamp; void Start() { StartCoroutine(Call()); } private IEnumerator Call() { yield return new WaitForSeconds(5); Login(); } public async Task Login() { otp.text += $"Loginig... "; if (!Apple.GameKit.GKLocalPlayer.Local.IsAuthenticated) { try { var player = await GKLocalPlayer.Authenticate(); var localPlayer = GKLocalPlayer.Local; TeamPlayerID = localPlayer.TeamPlayerId; var fetchItemsResponse = await GKLocalPlayer.Local.FetchItems(); Signature = Convert.ToBase64String(fetchItemsResponse.GetSignature()); PublicKeyUrl = fetchItemsResponse.PublicKeyUrl; otp.text += $"Team Player ID: {TeamPlayerID} "; otp.text += $"PublicKeyUrl: {PublicKeyUrl} "; } catch(Exception e) { otp.text += $"Error: " + e.Message; } } else { Debug.Log("AppleGameCenter player already logged in."); } } async Task SignInWithAppleGameCenterAsync(string signature, string teamPlayerId, string publicKeyURL, string salt, ulong timestamp) { } }