How to remove answered mark

I was invited to a new development team yesterday, and I can not choose that team under the Team drop down of Signing & Capabilities in Xcode. Also, when I first login to Apple Developer, this team is not in the main drop down (the teams dropdown). But if I go into "Apps", then I can see the team in the teams dropdown in the top right of the screen and switch to it. Anyone know what's going on?

I originally created my Apple Developer account when I was living in Canada (years ago). Now that I live in the U.S. I want to renew it, but I can't - because it thinks I'm still in Canada. When I go to change my contact information, I get a screen that says: "Unauthorized Your account can’t access this page. There may be certain requirements to view this content. If you’re a member of a developer program, make sure your Account Holder has agreed the latest license agreement." What do I do?

I am trying to implement a ML model with Core ML in a playground for a Student Challenge project, but I can not get it to work. I have already tried everything I found online but nothing seems to work (the tutorials where posted long time ago). Anyone knows how to do this with Xcode 15 and the most recent updates?

Hello. I'm seeing an inconsistent behavior where breakpoints I set in my (Swift) iOS app behave normally when I'm debugging on a device or on a simulator running iOS 17.x, but when I try using simulators of iOS 16 or 15 the breakpoints get ignored completely. I also observe that the breakpoints remain solid blue and do NOT adopt the dotted blue outline, as experienced by other users. I've seen a few posts on here and on SO about the general issue of ignored breakpoints (with no conclusive answer AFAIK), but I haven't seen any where the behavior varies with the SDK being used. The behavior is repeatable and predictable (within the same app at least). I am not adding the breakpoints after building/running, and I'm sure the logic reaches the lines with the breakpoints (and again, whenever I switch to an iOS 17 simulator, execution does pause as expected with the exact same breakpoints). Things I've tried and looked into: Clean up project build folder Delete and re-install simulators (iOS 16.4 and 15.5) Deleted the entire derived data directory, as well as the CoreSimulator one. Confirm the build configuration is Debug, and the "Debug executable" option is checked. inspect various build flags mentioned in other posts: {Swift compiler - Code generation - Optimization level - Debug: -0none; Debug information format: DWARF (I also tried DWARF with dSYM with no impact)}. Most of my settings are on the plain vanilla/out of the box side, with only a couple of SPM dependencies, and I've been maintaining the same app for about 5 years and don't think I've come across this behavior before. Currently using Xcode 15.1. Deployment target is 14.0. Thank you.

xcode15.1 debug does not show the value on the real machine but only the address of the pointer, but on the emulator it shows the normal value. But in the emulator it shows the normal value. xcode15.2 debug doesn't show the value but only the address of the pointer in both the real machine and the emulator. In Xcode14, the value is displayed normally in both the real machine and the emulator. What do I need to do to get it back to the way it was in Xcode14?

Hello everyone! When I run UI Tests on Xcode Cloud, I often encounter unexpected failures. Checking the screen recording, I found that the iOS Simulator could go into a black screen with a white Apple logo and a progress bar for a period after the test starts. This behavior of the Simulator causes my app's UI Tests to fail randomly, which greatly affects the practical use of UI Tests. I suspect this phenomenon is unrelated to my app and test cases, so I'm asking if anyone else has encountered a similar issue. 🤔

I created a package using "File > New > Package" and now I want to add a new Asset Catalog to this package. With my package selected in the project navigator I select "File > New > File" but it creates a Swift file instead of showing the Template Selection dialog Ref: https://developer.apple.com/documentation/xcode/managing-assets-with-asset-catalogs#Create-a-new-asset-catalog

Everytime when iOS simulator is launched I het a lot of repeated "*** quit unexpectedly" alerts. Where "***" is a mix of "managedappdistributiond","healthappd", and "findmylocated" Even after the simulator is launched I still het random "*** quit unexpectedly" alerts. Very annoying because the alerts deactivates the active window This is on an MacBook Pro M3 Max,, Xcode 15.2, Sonoma 14.2.1, it also happens with Xcode 15.1 A co developer (MacBook Pro M1 Max,Xcode 15.2, Sonoma 14.2.1) does not have the issue Any idea how I can prevent this from happening? Update Every mentioned service crash happens in libswiftCore.dylib at 0x1929f3938 assertionFailure(:_:file:line:flags:) + 248

I have an AppleTV app which I released in 2016. I've updated it and released a new version every year without much hassle. This year, with tvOS 17.2, the layered app icon isn't working right. This is a two-layer image made with PNGs. When it's selected, it looks right and the layers move correctly: But when it's not selected, the background layer disappears: Screenshots are from the simulator but it also happens on the device. It's inconsistent; sometimes it's the front layer that disappears. Occasionally both layers work, but I can't tell why. I've spent a day trying everything. Very frustrated. The icon previews correctly in Xcode and in Parallax Viewer. The image sizes are correct: 400 x 240 for Small, 800 x 480 for Small@2x, 1280 x 768 for Large. The back layer is a non-transparent PNG. I tried adding a Large@2x set. Didn't help. Originally I had a three-layer image with no middle layer PNG. I deleted the empty middle layer, but that didn't help. All the PNG files are from GnuIMP. Same color space, even. I was using the filenames tvicon-back-s.png and tvicon-back-s@2x.png. I tried taking out the @ sign in case that was confusing Xcode. (It never has before, but I am flailing here.) Anybody have any clues? If it's an Apple bug and there's nothing I can do, I'm going to just push the release button and hope it fixes itself someday.

Hello, my Apple Developer Program had expired 20 days ago, but i cant renew in any way (auto-renew dont work, i dont have "renew button" on web, dont have it in iOS and macOS developer apps, so i cant renew it. Has anyone encountered this problem? How can i solve it and renew my membership?

Hello, I have created a .NET MAUI application in Windows Visual Studio 2022. Also I have a MAC fully configured with latest Visual Studio for MAC and Xcode Installed. When pairing the MAC for windows machine I am able to run the simulators for various IPhone devices(as they are attached to MAC) but when I try to run for the MacCatalyst from my Windows machine it doesnt work. Is it possible to create a build for the MAUI application for MacCatalyst from my windows machine.The build should be created in my Windows folder directory.?

Context I'm trying to profile a binary (a simple C++ program compiled into dummy.o) and collect CPU Counters data. I have a configuration that works fine from the Instruments Counters GUI (see Screenshots below). I've exported this configuration to a template file named prof1.tracetemplate. Problem When I try to run a recording with that same template from the command line with xctrace (I also tried with sudo): $ xctrace record --template prof1.tracetemplate --launch dummy.o I get the following errors: Starting recording with the prof1 template. Launching process: dummy.o. Ctrl-C to stop the recording Run issues were detected (trace is still ready to be viewed): [Error] Unexpected failure: Couriers have returned unexpectedly. [Error] Failed to start the recording: Failed to force all hardware CPU counters: 13. [Error] Failed to pause recording session: Cannot pause session session unless it's running. Current state: kSessionError [Error] Unexpected failure: Data source agent failed to arm. Recording failed with errors. Saving output file... Output file saved as: Launch_dummy.o_2024-01-31_14.22.32_0B6E1A78.trace System Chip: Apple M1 macOS: 14.1.1 (23B81) xctrace version: 15.2 (15C500b) xcode version: 15.2 (15C500b) Screenshots

I am trying to build my watch app on my series 4 Apple watch currently running WatchOS 10.3 with a deployment target of 10.2 and Xcodes claims that my watch's OS version is too low. I have fully updated my watch to 10.3, tried to downgrade the deployment target to no avail. Xcode doesn't seem to be getting any data on what OS version my watch is running. It says watchOS () in the manage run destinations page. I imagine this is a problem with the connection between my watch and my mac but I cannot solve it. Any advice?

Currently, the id of my actual visionpro device is different from the xcode that works on my macmini. I added a visionpro id to xcode, but I can't build it with my visionpro. Can I log out of the existing login to xcode and log in with the same ID as visionpro? However, the appleID created for visionpro does not have an Apple Developer membership, so there is no certificate that makes it run on the actual device. How can I add my visionpro ID from the ID with my apple developer membership to run the xcode project app on visionpro? This is the first time this is the first time.

xcode 15.2, mac m2 mini, 14.2.1 sonoma i need a pdf file to stage my app for screen shots for the market. icloud wont sync, cant drag files to the home screen or any screen, it just does not work. i am at the end of my rope here, i just need some screen shots, my app is approved and ready am i wrong>? is there a way to do this or is it just broken now in the name of (lazy) security? edit--the more i read the more i angry and frustrated i get. this is broken and will not be fixed. i need to just workaround via email. so happy my second 100 dollar developer subscription bill is coming up!

I would like to create iOS App that have MTP-USB functions. So I have the following questions: 1.Is it possible to create an application with MTP-USB function using .NET MAUI? 2.If 1. is possible, how should I implement it? The devices I plan to use are iPhone 15 and iPhone 15 Pro. Thanks.

Trying to post a question about packages on this forum, I keep cueing the message: 'This post contains sensitive language. Please revise it in order to continue.' There is nothing in my query that is remotely ‘sensitive’. I don’t know what to do next. Thanks in advance for any advice. Regards, Lar

I currently own an Apple Watch SE2 device. However, when I try to debug from the watch to the actual device, the connection loss issue occurs all too often. Once the connection is lost, it continues to try to connect in the Disconnected list on the Xcode "Devices and Simulators" screen and is in a loading state. Very often, even when the connection is established and you are trying to start debugging, it drops out. Xcode cannot debug properly on the actual device. I later found out that the Apple Watch SE2 does not support 5.0 Hz Wi-Fi, only 2.5 Hz. I think that might be the cause. Is this phenomenon less likely to occur if you debug on an actual device such as a regular Apple Watch 7/8/9 or Ultra model? In fact, if debugging is difficult with the Apple Watch SE model, I am wondering whether I should purchase an additional Apple Watch. Or is there another way to improve this issue? It would be nice if the Apple Watch could be debugged by connecting it to a Mac with an actual cable like the iPhone. I am wondering if there is a way to disable and enable network debugging in Xcode. In the past, debugging the watch using only Bluetooth with the iPhone in Xcode seemed to be more stable. Except for the Watch, the iPad doesn't have any major issues with Wi-Fi debugging on the iPhone.

Hello, I'm trying to use devicectl to observe Darwin Notifications on my iPhone. Instructions: OVERVIEW: Observe a Darwin notification on a device. Note that this command will wait for 300 seconds by default before exiting. You can override this by providing a different --timeout value. USAGE: devicectl device notification observe --device <uuid|ecid|udid|name> --name <name> ... [--verbose] [--quiet] [--timeout <seconds>] [--json-output <path>] [--log-output <path>] DEVICE OPTIONS: -d, --device <uuid|ecid|udid|name> The identifier, ECID, UDID, or name of the device. COMMAND OPTIONS: --name <name> The name of the Darwin notification. This can be passed multiple times to observe multiple Darwin notifications. OUTPUT OPTIONS: -v, --verbose If given, provide more logging output than normal. -q, --quiet If given, output will include only errors. -t, --timeout <seconds> The overall command timeout in seconds. If this limit is exceeded the command is abandoned as a failure. -j, --json-output <path> An optional path to write a JSON file with command results. Note: JSON output to a user-provided file on disk is the ONLY supported interface for scripts/programs to consume command output. -l, --log-output <path> An optional path to write all logging otherwise passed to stdout/stderr. OPTIONS: --version Show the version. -h, --help Show help information. Executed command: xcrun devicectl device notification observe --device XXX --name com.example.Notification Result: Darwin notification observation started. 300.0 seconds remaining: On iOS, I'm posting a Darwin notification using: CFNotificationCenterPostNotification(center, CFNotificationName("com.example.Notification" as CFString), nil, nil, true) My CFNotificationCenterAddObserver on iOS does receive this notification. But the devicectl does not. Also no results when I remove the observer on iOS. How can I send a notification in such a way that it is picked up by the devicectl observer?