I’m blocked debugging a watchOS app on a physical Apple Watch. The iPhone connects to Xcode normally (wired), but the Watch either fails to connect with a tunnel timeout or disappears entirely from Xcode after I unpaired it inside Devices & Simulators. Environment Mac: macOS 26.x (Apple Silicon Mac) Xcode: 26.2 iPhone: iOS 26.1 Apple Watch Ultra: watchOS 26.2 (build 23S303) Connection: iPhone connected to Mac via USB (trusted). Watch paired to iPhone and working normally in the Watch app. Issue A (when Watch is visible in Xcode) In Xcode → Window → Devices and Simulators, the Watch shows up but is not usable and fails to connect. Error: “Previous preparation error: A connection to this device could not be established.” “Timed out while attempting to establish tunnel using negotiated network parameters.” In some attempts the Watch shows “Capacity: Unknown” / limited details, and then fails during preparation. Issue B (after unpairing Watch in Xcode only) I unpaired/removed the Watch in Xcode (Devices & Simulators). I did not unpair the Watch from the iPhone. Now: iPhone appears in Xcode and works normally for builds. Watch is still paired to the iPhone and works normally. Watch no longer appears anywhere in Xcode Devices & Simulators (no paired watch section, no watch run destination). What I’ve tried Reboots of Mac, iPhone, Watch (multiple times) Watch unlocked, awake; iPhone unlocked and close to Watch Verified Watch is paired and connected in iPhone Watch app Developer Mode enabled on iPhone and Watch Wi-Fi and Bluetooth ON (Mac/iPhone/Watch), tried toggling both Tried on home Wi-Fi and also with iPhone hotspot (same result) Resetting trust prompts / reconnecting iPhone via USB, re-trusting Mac Apple Watch: “Clear Trusted Computers” Xcode: removing/re-adding devices; clearing derived data; restarting Xcode Watch Developer networking test: Responsiveness = Medium (430 RPM) Questions 1. Is this a known issue/regression with Xcode 26.2 + watchOS 26.2 tunneling (CoreDevice / devicectl)? 2. Is there an Apple-supported way to force Xcode to re-discover a paired Watch after it was removed from Xcode Devices & Simulators (without unpairing the Watch from the iPhone)? 3. Any recommended logs or diagnostic steps I should collect (Console logs, sysdiagnose, specific Xcode/CoreDevice logs) to include in a Feedback report? If helpful, I can provide the full error text from Xcode’s Devices window and any logs you recommend. Thank you in advance,

hy! apple developer community! No, I have a problem that's driving me crazy: Multiple commands produce '/Users/giulia/Library/Developer/Xcode/DerivedData/ScheduledStudy-dcmmhcdncitvfkdditbjoipfalqg/Build/Products/Debug-iphonesimulator/singintestwidgetExtension.appex/Info.plist'. Can you help me fix it? I know it's probably stupid, but I've been trying to fix it for days. There aren't two info.plist file, and that's why I don't quite understand. If you could help me, you'd be doing me a favor. Thanks for your time. P.S. I'm sorry, but I'm just starting out with programming and I'm also quite young.

Ever since updating to Xcode 16.3, auto-completing variable names in lldb does not work. Is this a known bug? Is there a workaround to get it do auto-complete again?

Hi Apple Developer Community. I have a problem with opening my Xcode File in Xcode 16. It says, that a specific File is missing and I don't know how to resolve this. Can someone help me? Thanks for the help :)

This is the Icon Composer from Xcode 26.0 Beta 1 (not the really old one Xcode6? 😆 that I find when I search here) Is there a way to show the really cool 3D that they showed off during demos? Maybe all we get is which level is on top. Upon export it only seems to be able to do 2x? - is there some way to get it to take 1x? Every time I change it - it jumps back to 2x and iOS wants 1x... maybe a feedback. Also Xcode seems to want 3 icons - but there are 6 iOS ones exported. How do I get the other 3 in there? It does seem pretty easy to import PNG's from Sketch and order them and move pieces around. I guess you can save individual lighting for each icon mode.

Canvas Previews (targeting macOS) in both Xcode 16.4 & Xcode 26 fail to load, when the project imports a Swift package that imports and uses WebKit. I'm on macOS 15.5. Tried also to bring minimum targets of both the project and the package to 15.0. I see that there are some work-arounds for iOS simulator but nothing for the Mac. Anyone facing the same problem?

Hi, I am in the last step "preparing for submission" and everything excepts "age rating" is fine. How can I fix this? I have two apps and on neither i can edit "age rating" :(

Anyone else notice that Xcode 16.1 seems to have stopped building universal binaries for both debug and release builds even though under "Build Settings-Build Active Architecture" both Debug and Release are set to NO. We had been using the universal binary builds out of Debug for preliminary tests on Intel based machines. The Architectures setting is set to: Standard Architectures (Apple Silicon, Intel) - $(ARCHS_STANDARD). I started a brand new empty app and it does the same thing. A workaround is to set the Destination in Xcode's menu bar to "Build on Any Mac" and then find the binary and drag it to the Intel computer. You can't run that one though from Xcode. Another workaround is to build an Archive and drag that one.

Hello, Is anyone experiencing devices on OS 17 disconnecting from Xcode 15 and 16 Beta? I remember there were a lot of past conversations around the time when iOS 17 released but it seems to still be happening even after using Xcode 16 beta. Re-pairing devices and rebooting the hosts appear to fix it temporarily. I discovered that killing the remoted process also allows xcode to reconnect to the devices. Using Xcode 16's devicectl also doesn't work. I have my devices connected to a USB Hub and to multiple devices. The odd thing is I have iOS 16 devices connected and those don't disconnect. I believe iOS 17 introduced a new coredevice stack to connect but has anyone found a fix for it or have any recommendations? TN3158 isn't relevant in my situation because VPN and Packet filtering is not in use and I filed feedback with Apple but they have't responded in a long time.

I've created a new project in Xcode. I'm running the Xcode 16.4 and MacOS 15.5. I'm trying to run my barebones project on my iPhone 16 (I'm just getting started). I turned on developer mode on my iPhone and went through the whole process. But in the Signing & Capabilities of my project under status I see two errors... There is a problem with the request entity A device with number 'XXXX8801C' already exists on this team. Provisioning profile "iOS Team Provisioning Profile: [MyBundleID]" doesn't include the currently selected device "My iPhone" (identifier XXXX8801C). I noticed in the devices on the developer portal that my device is showing as "Processing." I feel ike it's stuck. But I can't figure out how to clear it all out and try again. It's been 24 hours since this error came up. I've tried to clear trusted computers on the iPhone. I've deleted the "Derived Data" folder. I've removed my developer account from Xcode and added it again. I've restarted both my Mac and my iPhone multiple times. I've noticed it asked to authorize my computer twice. When I clear the authorized computers and then plug the phone back in it asks twice again. So I'm not sure if this is the issue? No idea why it asks twice but I'm only ever able to respond to the second request as the first request gets blocked in the UI by the second requests if that makes sense? I'm also not able to turn off developer mode on my iPhone. The switch isn't there as the docs state it should be. So again, I feel like this is the phone and the developer portal stuck causing the problem. Note: I saw someone else had encountered this problem and I replied to it and boosted it. But it looks like it was posted in 2017? Hence this new post.

I'm trying to bring up an existing macOS app workspace to build against the macOS 26 SDK, however Xcode 26b1 is producing the following error, and I'm unable to proceed: /Users/tonyarnold/Documents/Reveal/<unknown>:1:1: error reading '/Applications/Xcode-beta.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/lib/clang/17/include/module.modulemap': No such file or directory /Users/tonyarnold/Documents/Reveal/<unknown>:1:1: failed to emit precompiled module '/Users/tonyarnold/Library/Developer/Xcode/DerivedData/ModuleCache.noindex/_Builtin_stdbool-LVR359SH1U4537HG9T3JOGN.pcm' for module map '/Applications/Xcode-beta.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/lib/clang/17/include/module.modulemap' I've checked and the module map that it claims is missing is there on the filesystem. Is this a known issue with this beta?

After updating to 16.3, my project now fails to compile with the diagnostic: "Command SwiftCompile failed with a nonzero exit code". This is a SwiftUI document project with two local packages, the second of which is a rather large one with 112 SwiftUI files. It is this second package that is failing. There are no issues when compiling with 16.2. Without diagnostics I'm having a bit of difficulty in determining the cause. My thought is to regress the commits unit 16.3 gives a success, or shows issues. Although I'm not catching a similar issue in the forums, I'm seeing other problems with 16.3. Has anyone else had such build failure isolated to 16.3? Any advice on other ways to approach this problem? Thanks in advance

Hi! I´m new developing in this app, I have a problem. The preview screen is showing me the image bellow, There is no other response, I dont know what could happened. Thanks!

I have a sample SwiftUI iOS app. As shown in the screenshot below, my project has three configurations: Debug, MyDebug, Release. If I select the Debug or MyDebug scheme, I get a preview. But if I select the Release scheme, I get an error that says the following. ”***.app” needs -Onone Swift optimization level to use previews (current setting is -O) , where *** is the app name. It probably has nothing to do with the Preview error, but the Info.plist has a dictionary such that the key name is devMode, and the value is $(DEVMODE). And I have a user-defined setting as shown below. My ContentView has the following. import SwiftUI struct ContentView: View { @State private var state: String = "" var body: some View { VStack { Text("Hello, world!: \(state)") } .onAppear { if let devMode = Bundle.main.object(forInfoDictionaryKey: "devMode") as? String { print("Development mode: \(devMode)") state = devMode } if let path = Bundle.main.path(forResource: "Info", ofType: "plist") { if let dict = NSDictionary(contentsOfFile: path) { print("**** \(dict)") } } #if DEBUG print("Debug") #elseif MYDEBUG print("MyDebug") #else print("Que?") #endif } } } #Preview { ContentView() } So my question is how I get the preview for all three build schemes? Muchos thankos.

Hi I've downloaded the latest version of Xcode 14.2 but when I run the app in Simulator I can only test it on iOS16.2 Is there a way to run it in 16.3?

谁帮我看下这个问题怎么解决啊，困扰一个多星期了，遇到的同胞联系下邮箱799610809QQ邮箱 Module 'Foundation' is needed but has notbeen provided, and implicit use of modulefiles is disabled

I am having similar problems to this guy on Stack Overflow over a year ago: https://stackoverflow.com/questions/77627852/functions-of-iouserscsiperipheraldevicetype00-class-in-scsiperipheralsdriverkit There are also a few questions on this forum about this object, none of which have answers. I can get my driver to match and instantiate, but nobody calls my UserDetermineDeviceCharacteristics (which does nothing, just returns kIOReturnSuccess) I can attempt to call UserSuspendServices(), UserResumeServices() or UserReportMediumBlockSize() and all of them return kIOReturnUnsupported. It doesn't matter if I've unmounted the disk or not. Is the custom driver supposed to be instantiated beside the kernel's IOSCSIPeripheralDeviceType00, or should it replace it? What should its IOProviderClass be? What should its IOClass be - IOUserService, or something else? see FB19678139 and FB19677920

I am trying to run Xcode 15 on macOS 15.4. As we need to build framework with older versions of Xcode. Any work around for it?

Starting Xcode 14, iOS Simulator is able to communicate with APNs in order to register for notification in the sandbox environment. I created a sample test for this. A dumb iOS application that registers for notifications. It has UITests to automatize the tap on the consent popup (it is not possible to ask for the permission via CLI sadly). Once the application registers, the AppDelegate method didRegisterForRemoteNotificationsWithDeviceToken is called and the device token is sent to a local server application (node.js). The test itself creates an iOS 18.6 Simulator with xcrun simctl, builds such app and run the tests through through CLI with xcodebuild. Running this on my personal Macbook Pro M1 2021 goes well every time, so I wanted to bring it on Github Actions (arm64 macOS machines), in order to test the works on a open source library I'm building (hapns). Contacting Github support led me to test this on a macOS image running inside a VM inside a Veertu Anka container on my personal Macbook Pro, due to an VM architectural limit suspicion. The results were the same: iOS simulator isn't able to receive the device token. Not even didFailToRegisterForRemoteNotificationsWithError is called (tested through some network probes-requests that communicate to the server which checkpoints the process reached). So, as asked, I've setup a repro-case to be run in the VM and I've collected VM diagnostics ready to be tested and attached. Does anyone know if there is some unspecified (or specified but buried in the documentation) limit for this? Thanks. Github discussion link for further details, repro-case and so on: https://github.com/actions/runner-images/issues/12747

I have a multi target project where every target relies on a built "web bundle" which is basically a collection of html, optimized images, and optimized javascript. Right now that web bundle is built in a pre build step by running a script. The script takes awhile to run and outputs to a folder that is referenced into the project via a PBXFileReference which is then referenced in the Copy Bundle Resources step. 96516AC22BF928DD00576562 /* build */ = {isa = PBXFileReference; lastKnownFileType = folder; name = build; path = "../web-ui/build"; sourceTree = "<group>"; } .... 96516AC32BF928DD00576562 /* build in Resources */ = {isa = PBXBuildFile; fileRef = 96516AC22BF928DD00576562 /* build */; }; As a step, I wrote an aggregate target that can also run this script. I specified its input and output files and turned off sandboxing. It does exactly what I need it to. Critically it is ran based on dependency analysis. If I modify any file in web-ui it rebuilds, if I dont I can repeatedly build the aggregate target and it will not re-run the script. This is perfect. A97590172E419CBA00741928 /* Build Web Bundle */ = { isa = PBXShellScriptBuildPhase; buildActionMask = 12; files = ( ); inputFileListPaths = ( ); inputPaths = ( "$(SRCROOT)/xcodescripts/build-web-bundle.bash", "$(SRCROOT)/web-ui/index.html", "$(SRCROOT)/web-ui/vite-env.d.ts", "$(SRCROOT)/web-ui/vite.config.ts", "$(SRCROOT)/web-ui/tsconfig.json", "$(SRCROOT)/web-ui/stats.html", "$(SRCROOT)/web-ui/postcss.config.js", "$(SRCROOT)/web-ui/package.json", "$(SRCROOT)/web-ui/justfile", "$(SRCROOT)/web-ui/src/", ); name = "Build Web Bundle"; outputFileListPaths = ( ); outputPaths = ( "$(SRCROOT)/web-ui/build/", ); runOnlyForDeploymentPostprocessing = 0; shellPath = /bin/sh; shellScript = "exec \"${SCRIPT_INPUT_FILE_0}\"\n"; }; You may notice I reference a src file. This is made possible via a flag USE_RECURSIVE_SCRIPT_INPUTS_IN_SCRIPT_PHASES which allows Xcode to check folder dependencies recursively. The problem is that my other targets do not automatically recognize that they need to run the "WebBundle" aggregate target in order to update a resource they copy in their "Copy bundle resources" phase. So I tried adding it as a Target Dependency. A9DE685B2E41C9A8005EF4E0 /* PBXTargetDependency */ = { isa = PBXTargetDependency; target = A97590132E419C1200741928 /* WebBundle */; targetProxy = A9DE685A2E41C9A8005EF4E0 /* PBXContainerItemProxy */; }; Unfortunately this breaks whatever magic was allowing the script to be run only when there are web bundle changes. Every build it runs the "Build Web Bundle" script. I think what I am missing is a way to specify in these other targets that a resource they are used to copying from the Xcode PBXFileReference is produced by the aggregate target. This way they can start to reason about the dependencies. Other possibilities are that I should be building the web bundle to a separate location. Or that these references are somehow broken in another way. To be clear the folder format is as thus project/ iOS/ client.xcodeproj web-ui/ build/ (web bundle build is output here and referenced relatively) src/ index.html (and other things)