Inside our app, after login (user side), getting grey screen on homepage.

Hi everyone, I'm working on an NFC-related app using CoreNFC with APDU commands to read and write tags. I’ve encountered an issue when trying to handle the scenario where the user cancels the NFC session. Here’s what’s happening: When a user cancels the NFC session manually (e.g., by tapping "Cancel"), I see an error log indicating tagReaderSession|userCancelled. However, when I explicitly call session.invalidate(errorMessage: "No NFC tag found") in my code to handle a scenario where no tag is detected, the session still shows the error as userCancelled instead of my custom error message. This behavior is confusing both in terms of debugging and for providing feedback to users, as I expect my custom message to appear instead of the generic "user cancelled" message. func tagReaderSessionDidBecomeActive(_ session: NFCTagReaderSession) { // Session becomes active } func tagReaderSession(_ session: NFCTagReaderSession, didDetect tags: [NFCTag]) { // Handle tag detection logic } func tagReaderSession(_ session: NFCTagReaderSession, didInvalidateWithError error: Error) { print("Session invalidated with error: \(error.localizedDescription)") } func handleNoTagDetected(session: NFCTagReaderSession) { session.invalidate(errorMessage: "No NFC tag found") } I call handleNoTagDetected(session:) explicitly when no tag is detected, expecting the custom error message to show. However, the system still shows the cancellation error. Has anyone else experienced this behavior? Is this the intended behavior for CoreNFC, or am I missing something in my implementation? Any guidance would be appreciated. Thanks in advance!

So, as we found out from WWDC, the migration to Apple Silicon is inevitable. Does anyone have a good recommendation for a replacement for Macintosh Common Lisp on Apple Silicon? I was using it back in the MPW days and struggling to keep the Lisp code working, but Apple Silicon has thrown a money wrench at it! Thanks in advance for any advice on any available Apple Silicon Lisp development tools!

如何在没有电脑的情况下启用开发者模式 please reply me in Chinese

Hello, I'm encountering an issue when trying to build and launch a Flutter app on a physical iOS device using Android Studio. Here is the full log: `Launching lib/main.dart on （iPhone Name） in debug mode... Automatically signing iOS for device deployment using specified development team in Xcode project: （Project ID） Running Xcode build... Xcode build done. 19.7s Failed to build iOS app Could not build the precompiled application for the device. Error (Xcode): Target debug_unpack_ios failed: Exception: Failed to codesign （Project Names）/build/ios/Debug-iphoneos/Flutter.framework/Flutter with identity （identity ID）. Error launching application on （iPhone Name）.` This only happens when using Android Studio. When I build the same project using Xcode, it runs fine on the same device. Background: I accidentally deleted all Apple accounts from Xcode recently. In Keychain Access, I had three identical certificates; I deleted the older two and kept the newest one. I suspect this may be related to provisioning or code signing, but I’m not sure how to resolve it within Android Studio. Any advice or steps to fix this would be greatly appreciated. I created a new test project in Xcode using the iOS > App template, enabled automatic signing in Signing & Capabilities, and selected my team.
 I then tried building and installing the app on a real device, and it worked successfully.
 This confirms that there are no issues with code signing or provisioning on the Apple side.
 Thanks in advance!

We are experiencing an issue where our app gets stuck during launch. The splash screen appears for some time, and then the app either becomes unresponsive or closes unexpectedly. However, there are no crash logs captured in Xcode or Firebase Crashlytics, indicating that the app is not crashing but rather being terminated. This issue is preventing affected users from properly launching the app. Additionally, some users have reported occasional lag and slow performance when using the app. The issue occurs only for a specific subset of users and appears to be related to other Electronic Logging Device (ELD) apps running in the background. When these apps are active, our app struggles to launch and sometimes becomes unresponsive. We suspect that this behavior could be related to system resource allocation, such as high memory consumption by background apps, which might be affecting our app's ability to launch correctly. However, we have been unable to reproduce the issue on our end despite multiple attempts. Actions Performed During App Launch: Firebase configuration API requests, including: Fetching account details Registering the FCM token with the server Asynchronous background requests to fetch POI details Creating a local database and storing POI data in local storage We would like guidance from Apple regarding potential causes and debugging strategies, especially in scenarios where the app does not produce crash logs but still fails to launch properly. Any insights into memory management, conflicts with background applications, or system resource constraints would be highly appreciated. Steps to Reproduce: Install and launch the app on an affected device. Observe that the app gets stuck on the launch screen. After some time, the app terminates unexpectedly. Issue is inconsistent and occurs only for certain users. Presence of other ELD apps running in the background appears to influence the issue.

I’m encountering an issue with the page.selectionForWord(at:) method in my application. This method has stopped working in Mac Designed for iPad mode. The functionality works fine on physical devices such as iPhone and iPad, as well as on Mac, but in this specific mode, the method no longer works, and the application crashes. It is crucial for me that this functionality works in Mac Designed for iPad mode, as rewriting the entire code for Mac would be too time-consuming, especially considering the size of the application. Interestingly, a similar method, page.selectionForLine(at:), works perfectly with the same parameters in all environments, including the Mac Designed for iPad mode. This makes the issue even more puzzling. The issue began after the latest update. The app no longer responds to the page.selectionForWord(at:) method, which causes the application to crash. I have attached a test app to reproduce the error.

Saw this info: https://developer.apple.com/documentation/contacts/cncontactstore But have no idea what I'm doing. This is a pressing matter and I need to determine the date/time contacts were originally created on my icloud account. I have tried the shortcuts method and it merely shows the date they were loaded into whichever device i'm logged in on if they were created a while ago

Hello, I have created a .NET MAUI application in Windows Visual Studio 2022. Also I have a MAC fully configured with latest Visual Studio for MAC and Xcode Installed. When pairing the MAC for windows machine I am able to run the simulators for various IPhone devices(as they are attached to MAC) but when I try to run for the MacCatalyst from my Windows machine it doesnt work. Is it possible to create a build for the MAUI application for MacCatalyst from my windows machine.The build should be created in my Windows folder directory.?

关于通过Advanced commerce API 创建SKU，有几个问题： 1、通过Advanced commerce API创建的自动续费订阅的SKU是否支持推介优惠、促销优惠？如果可以，是在苹果connect设置吗？ 2、已订阅通过connect创建的SKU的用户，是否可以重复订阅通过Advanced commerce API创建的SKU？还是要通过Advanced commerce API变更订阅？ 3、Advanced commerce API创建的SKU ,用户订阅成功后，续费的扣款是否仍由苹果发起？还是由开发者自行发起？

Hello, I have a question about running tests on multiple simulators. Currently, my company has a WDIO+Appium test suite with XCUITEST driver that runs on a single simulator through a mockttp proxy (we are intercepting and mocking some of the responses from our APIs and pass through the rest). In order to route the traffic we are currently using 'networksetup -setsecurewebproxy '. Everything works as expected. With growing number of tests we'd like to scale number of simulators on a single host to 3-5. We have a working setup but the problem are system-wide proxy settings routing traffic from multiple simulators, which we can't distinguish by UDID or any other means, we know of. We can spin multiple mock servers on the same machine but we are struggling to find the way to route the traffic on a simulator basis. In the end, both options are viable: 1 mock server running for multiple simulators N number of mock servers for N number of simulators Has anyone had the same/similar problem? How to approach this? We are currently running on Sequoia OSX and platform version 18.6. Thanks!

In System Settings -> General -> Date & Time, there is an option called "Set time and date automatically". Is there a way to check whether it is enabled programmatically?

Good day, everyone. I've already spent two days trying to figure out if this is even possible: I have a working project with a huge number of SPM dependencies. We need to wrap all of this into a framework that can be easily connected to another project. Currently, following the instructions on Apple's documentation, I've done everything step by step. However, after connecting the library to a new project and writing import Framework, I get the error: Missing required modules: [list of all SPM from Framework] I thought that a static framework implied that all dependencies would be bundled into the project, but that didn't happen. Are there any ways to solve this problem? Thank you!

Tech stack: React Native + Expo. We are using two solo developer accounts (not a business or team account). Context: Friend and I set out to make an app together. Friend created app and set it up on Apple. We worked on it together. He controlled devops (builds and submission). Friend no longer can commit to development. Wants to transfer to me. I create apple developer account. After app transfer, my phone (deviceid) underwent a 14 day soft ban preventing builds. That has since been lifted. There seems to be something in place preventing me from making dev builds on the original dev bundleid. It says it's still owned by him despite the app transfer. Bottom line: what needs to happen so 1 can make dev builds? nice to have: is there a way for us to both make dev builds under the same bundleid?

Hi, Help!! So I was in Thailand for a number of years and developed an app over there and signed up as a developer over there. But now I'm in the USA indefinitely and I'm unable to change my payment method. How can I change it? I called the USA support line twice and no one was able to help me. I tried the Thailand phone number and I'm unable to call from the USA. Any suggestions? Thanks!!

For the Linux version of my application which is written in C++ using Qt, I display the CHM format help files with this code: QString helpFile{ QCoreApplication::applicationDirPath() + "/Help/" + tr("DeepSkyStacker Help.chm","IDS_HELPFILE") }; QString program{ "kchmviewer" }; QStringList arguments{ "-token", "com.github.deepskystacker", helpFile }; helpProcess->startDetached(program, arguments); (helpProcess is a pointer to a QProcess object) The -token com.github.deepskystackerpart of that ensures that only a single instance of the viewer is used for any code that uses that invocation. Are there any chm file viewers for macOS that are capable of that sort of trick? The ones I've found on the App Store give minimal information and appear to be very simple minded tools that are not not intended for integration into an application as above. I know that MacPorts offers ports of kchmviewer but I'd prefer not to use either that or HomeBrew ... David

I am a new user of PyCharm, but have years of experience with MacOS, python and similar. My set up is MacBook Pro M1, 32GB ram, MacOS Sequoia 15.2, and PyCharm Pro latest. Path to projects leads to an external SSD via usb-c. I have set up some projects, each using python 3.12 in a venv. The projects work for a while then “lose” a module (module not found). I have gone through every troubleshooting method the built-in AI and web search have come up with. The first module to disappear is docx2txt. I created a new project and it worked, for a couple of days then the error returned. The docx2txt module could not be found working within or outside of PyCharm. In site-packages there is no “docx2txt” folder, only an “info” folder containing WHEEL and its companions. For the most recent disappearance, I noticed the package used distutils. I cloned the docx2txt project from GitHub and updated setup.py to use setup tools instead of distutils, and installed it. Python invoked from the command line can import it, but not from PyCharm. When I run the project from PyCharm, the interpreter cannot find dotenv. I have lost days of work time at this point so I am a bit worried. Advice on what to look at and for would be great.

iphone 15 pro max ios 26 Stuck at the developer mode startup interface and unable to swipe up.

Hello all, I am building a simple Flutter app, and I want to support entering the app through an email. I have used flutter deep links on android and all works well, but for some reason on IOS it doesnt. What I have achieved: When clicking the link I do get navigated into the app, but I get navigated to whatever the last screen was, regardless of the path in the URL. Furthermore, the logical code inside the app doesnt seem to run either - no logs are printed etc. I have even tried following the flutter tutorial at https://docs.flutter.dev/cookbook/navigation/set-up-universal-links to the letter, and it doesnt work I am using: Flutter 3.22.3 Go Router 14.2.7 Thanks in advance

I admit I am doing something unusual, and I would not be surprised if it didn't work. I am surprised, however, because after performing the equivalent operations on four bundles, all of the bundles work fine on macOS 15.6.1, but only two of them work on macOS 26.1 (beta 2). I don't know what causes the different outcomes. What I am trying to do is get Java to pass the macOS 26 AppKit UI SDK linkage checking without having to rebuild the JDK using Xcode 26. Rebuilding works for the latest SDK, but it is very inconvenient and may not work for older JDKs. It usually takes a while before the JDK build team successfully transitions to a new Xcode release. My approach is to use vtool to update the sdk version in the LC_BUILD_VERSION load command of $JAVA_HOME/bin/java, which is the launching executable for the JDK. I performed this operation on four JDKs: 25, 21, 17, and 11. (I ran vtool on macOS 15.) It was completely successful on JDK 25 and 21. The JDK launches correctly on macOS 15 and macOS 26. On macOS 26, AppKit uses the new UI, which is the desired outcome. The JDK runs despite that fact that I signed the modified $JAVA_HOME/bin/java with my developer ID, which is inconsistent with the JDK bundle signature. (Redoing the bundle signing is part of the JDK build process; if that were necessary, I would stick with rebuilding the JDK.) The operation was not successful on JDK 17 and 11. I noticed two problems, which are not obviously related. When vtool created the new version of the java program, it lost the tool definition. $ vtool -show-build-version java java: Load command 10 cmd LC_BUILD_VERSION cmdsize 32 platform MACOS minos 11.0 sdk 11.1 ntools 1 tool LD version 609.8 $ vtool -set-build-version 1 10.0 26.0 -output a.out java /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/vtool warning: code signature will be invalid for a.out $ vtool -show-build-version a.out a.out: Load command 22 cmd LC_BUILD_VERSION cmdsize 24 platform MACOS minos 10.0 sdk 26.0 ntools 0 Adding back the tool definition didn't seem to matter. When I try to run the revised executable (in the context of the JDK bundle), it works on macOS 15, but on macOS 26, it is rejected as damaged. If I run the revised executable outside the JDK bundle, it runs (but fails because it can't find the rest of the JDK, which is expected). In all cases, GateKeeper rejects the revised executable because it has not been notarized, but that doesn't seem to stop the program from executing.