Scenario is when keyboard is opened within the app being developed then switch to other app, for instance, Notes app and create a note to enable keyboard from there. While the Notes app keyboard is active switch back to the developed app the keyboard in it is dismissed. Any thoughts?Thanks

[Iphone11]

What type of licensing does it apply for the usage of FONT_FAMILY='System' in Apple/iOS app?

I found that on my cutomer's mac device, webflterproxyd start interferiing with the NE traffic. Tried to stop it, but "screen time" was not enabled at all. Who started this webfilterproxyd process and how to stop it?

In the clock app when making an alarm for myself to wake up, I found this bug where If you swipe left On an alarm without deleting it and then Swipe right it does a goofy visual glitch where it teleports to the top of your screen.

I have been battling the new Icon Composer app for 2 days trying to build an app icon. However, I cannot get it to import any files. I have used the Apple provided App Icon Template. I have exported my layers to .svg and when I open the finder, everything is disabled. I can't find help for this anywhere. I am on Sequoia on my Mac and not sure how to design this app icon without access to the composer.

Development environment: Simulator: iOS 26 beta 3 iPhone 16 (for testing) Simulator 2: iPadOS 26 beta 3 iPad Air 13 inch (M3) (for testing) Connected Device: iPadOS 26 beta 3 iPad Pro 11 inch (M4) (for testing) Dev Device: macOS Tahoe 26 beta 3 Macbook Air When using the NavigationSplitView element, the sidebar has a built-in panel toggle button. However, when I click the toggle button to toggle the sidebar section in SwiftUI 26 on both simulator 2 and the connected device, it has a slight animation glitch before going back to normal. What's going on? This is my code for the specific view that has the NavigationSplitView (and all views are connected through TabViews): RecordsPage.swift Here are image references: When I clicked the toggle: After 1~2 seconds: These images are in the state of the panel being hidden.

Hello, I used icon composer to create an icon for my Mac OS app and it seemed to have worked. I see the app icon everywhere except for window expose or stage manager. Any help or guidance would be greatly appreciated!

Hello, I have used CPPointOfInterestTemplate for displaying data and as user scrolls using the up/down arrow, I do not see any change in the map. Is there a way to highlight the POIs as the user scrolls through the list? I need to use the map controls and zoom to check the markers on the map. Is it possible to set the zoom level of the map in CarPlay? Pls suggest on the above queries

I previously written here, and some advices were to appeal to rejection sending them message describing uniqueness of the app. Nothing is working. In short, i have a vpn app (of course by design shares some concept with other apps that are in the app store). But since the rejection i have completely changed the ui, added built in browser, p2p messenger so users could interact with each other without any interference. The app is completely free with no ads. I thought this is it, there's no way it would reject this time, but... i get a notification with rejection repeating the same old message. I'm extremely frustrated and don't know what to do. Tried changing the logo of the app, the name to "Incognito - Messenger, VPN", app store screenshots. I've already appealed with screenshots describing unique features that other vpn apps don't have, but the message just repeats from app review team. Submission ID: 1a49ee0b-c4e2-4a36-8372-e4d3b9a8b13f Does anybody have an advice what i can do?

Target: MacOS 11.1 and above C++, Juce 8, XCode 16.2 Testing: Sonoma 14.5 Logic Pro (latest version), Reaper 7.34, Pro Tools 2023.12 and 2025.6 I'm developing an audio plugin that creates an NSStatusItem ("menu bar status icon" or MBSI for short) to provide visual feedback for one of the components. I've encountered a Logic Pro-specific behavior that I'd like to fix. I'm building for Mac-only, Intel and Silicon, and for AU/VST3/AAX. Summary: The NSStatusItem for the MBSI is created successfully and functions properly in some hosts (Reaper (AU and VST3), Pro Tools (AAX)) but isn't visible in Logic Pro, despite identical API behavior. Details: NSStatusItem Creation: implementation using [[NSStatusBar systemStatusBar] statusItemWithLength:NSSquareStatusItemLength] All API calls report success in both working (Reaper) and non-working (Logic Pro) hosts. Logging shows Logic Pro and Reaper create the NSStatusItem with the same properties: Window frame: {{0, -36}, {38, 36}} (both hosts) statusItem.visible: YES (both hosts) Button exists and responds to state changes (both hosts) Y coordinate is -36 pixels (above visible screen, both hosts) In Reaper, I can see the MBSI but in Logic Pro I can't. Note: the MBSI has no functionality beyond visual feedback. It's not clickable nor does it create a corresponding menu. Questions: Are there known differences in how Logic Pro's AU hosting service handles system UI elements compared to other hosts? And if so, is there guidance on AU plugins accessing system UI elements like the menu bar? Link to NSStatusItemTest.component: https://app.box.com/s/i3rq0hii3qf43iojrayc17fsfq7fnssd Link to video showing issue: https://app.box.com/s/icefqk898timqov77t468lqtio0rjqul Link to Console output for testing in Reaper vs Logic Pro: https://app.box.com/s/ph6nv1lmozo3phtjx3md6abdms5atgg6

I have an ongoing activity in progress. Think of: a delivery in progress house internet reboot in progress some water / electricity / internet / tv outage. (food) order processing I want to show a persistent toast message above the tab bar, across all tabs and screens across the app. It could take 15 minutes until the activity is finished. Obviously there's a challenge of: accessibility content overlaying with each other extra engineering effort. What we've thought of doing is: Option1: show a toast message, but when a modal is presented then it presents on top of the toast message. The toast message no longer updates itself. Once the modal is finished, then the toast message re-appears and continues to update. Option2: keep the toast message across all tabs and modals and work through the challenges mentioned Question: What are some other design approaches that could be taken to persist an ongoing activity (much like 'Live Activity', but just across the app when it's in foreground) or what are some design reasons that the two options considered are bad?

Existing smartphones store multiple NFC card information. When the NFC antenna of the phone is close to the card reader, it is usually necessary to open the APP to select NFC card information or default to one card information to be transmitted to the card reader. It is not possible to quickly select or switch cards among multiple cards. For example, after using the NFC function to swipe the subway card, the phone needs to open the car access control and community access control again. It is necessary to open the mobile NFC card information management APP to select the community access control card and then swipe the mobile NFC access control, which causes inconvenience. （现有的智能手机存储多个 NFC 卡信息。当手机的NFC天线靠近读卡器时，通常需要打开APP选择NFC卡信息或默认一个卡信息传输到读卡器。无法在多张卡之间快速选择或切换卡。例如，使用NFC功能刷完地铁卡后，手机需要重新打开车内门禁和小区门禁。需要打开手机NFC卡信息管理APP选择社区门禁卡，然后刷手机NFC门禁，造成不便。） Divide the smartphone screen into multiple areas, and users can freely define corresponding NFC information for each area. When the screen is turned off and not unlocked, select NFC card information by pressing different screen areas with your fingers. When the mobile NFC is close to the card reader, the selected card information will be transmitted to the reader(将智能手机屏幕划分多个区域，每个区域手机用户可以自由定义对应NFC信息。在熄屏’不解锁的情况下，通过手指按压不同屏幕区域选择NFC卡片信息，手机NFC贴近读卡器时将选择的卡片信息传递给读卡器。) Below, the method will be further explained in conjunction with the accompanying drawings and embodiments. Figure 1 is a schematic diagram of a utility model; Figure 2 is the flowchart of the present utility model; NFC reader, 2. Mobile screen partition, 3. NFC signal in Figure 1. In Figure 2, 1. Press the area of the screen partition with your finger. 2. Place the phone close to the NFC reader. 3. The phone senses the returned NFC signal. 4. The phone detects the pressed area.（ 下面结合附图和实施例对方法进一步说明。 图1为实用新型示意图； 图2为本实用新型流程图； 图1中1.NFC读取器，2.手机屏幕分区，3.NFC信号。 图2中1.手指按压屏幕分区的区域2.手机贴近NFC读取器3.手机感应到返回的NFC信号4.手机检测到按压的区域，5.是否检测到手机用户按压区域的动作，6.检测到按压区域，根据按压区域做出匹配相对应的NFC的动作7.选择用户所需的NFC卡8.NFC卡收到信息并发出卡片信息9.NFC读卡器收到NFC卡的信息。） For example, a smartphone user has N NFC virtual cards in their phone. Users can divide the smartphone screen into N areas, distinguished as A area, B area, C area..., each area controls different NFC. When a smartphone user holds down the B area that controls NFC (such as virtual access cards) and brings the phone close to the NFC card reader (such as access control). The mobile phone will sense NFC signals (access control signals), triggering the phone to detect the area that the user is pressing. There are two possibilities. Firstly, if the user's pressing action is not detected, the NFC card corresponding to the default A zone (set as the default here) will be selected. If the user's pressing action is detected and it is detected that the pressing is in Zone B (the partition corresponding to the access card), then the NFC information corresponding to Zone B is triggered. The smartphone receives this message, and the corresponding NFC sends out a card message. The NFC card reader (access control device) receives the message and reacts (door opens).（例如，一智能手机用户手机中有N个NFC虚拟卡。用户可以将智能手机屏幕分为N个区域，分辨为A区、B区、C区······，每个区域分别控制不同的NFC。当智能手机用户按住控制NFC（如虚拟门禁卡）的B区域并将手机靠近NFC读卡器（如门禁）。手机将会感应到NFC信号（门禁信号），触发手机检测用户正在按压的区域。有两种可能性，第一没有检测到用户的按压动作则选择默认的A区（这里把A区设为默认）所对应的NFC卡。第二检测到用户的按压动作并检测出按压的是B区域（门禁卡所对应的分区），则触发B区域所对应的NFC信息。智能手机收到此信息，相对应的NFC发出卡片信息，NFC读卡器（门禁设备）收到信息，做出反应（门打开）。） 图1 image1 图2 image2

1/自从更新26.0版本 页面好看但是应用和主界面使用体验非常差很卡 2/苹果键盘功能有待优化 表情和语音文字识别还有键盘设置 3/还有手机发热卡顿 导致非常多的使用不方便 苹果官方请优化以上问题

let glassView = UIVisualEffectView(effect: UIGlassEffect(style: .clear)) glassView.frame = CGRect(x: 100, y: 200, width: 200, height: 400) self.view.addSubview(glassView) Though UIGlassEffect has two variants: .regular and .clear, even the clear one has some blur on the background. Is there a way to do get absolute no blur? Edges still have the glass effect. Apple does this in two places: Camera app: Text magnifier:

Hello! I am developing an ebook reader iOS app that uses c/c++ codec as a page renderer. The codec uses TrueType as a font rendering engine that requires access to .ttf (or .ttc) files. Currently, I supply TrueType with fonts embedded in the app package, so they lay within the app sandbox. The codec supports the whole unicode plane and many languages that ebooks may use, but the fonts I supply don't have some of the important glyphs (i.e. katakana or hangul). I see that iOS has its own font storage, located in /System/Library/Fonts/ directory. The codec is able to parse this directory and read .ttf files located inside, using these fonts as a fallback in the case when the supplied fonts can't draw certain glyphs. I use opendir and fopen(in "rb" mode) as a way to read the data, and it works well. Does this type of access to the system directory violate the sandbox rule for an app distribution, and, if yes, is there a way to get access to stored .ttf files not violating the mentioned rule?

Hi everyone, since updating to Xcode 26 Beta 3, I’m seeing some really strange behavior. I just changed the color of a Color asset in my SwiftUI view – literally just switched from one named color to another – and suddenly: • Previews stopped working completely, with vague or no error messages. • Even when I changed the color back to what it was before, the previews still refused to build. • In addition, Xcode no longer restores the open tabs/windows when reopening the project. It just shows a blank editor every time I open it. This all happened without touching any project settings or code structure – just a simple color swap. Has anyone else run into this with Xcode 26 Beta 3? Would love to know if it’s a known bug or if there’s a workaround (besides nuking Derived Data, which I’ve already tried). Thanks!

The bane of my existence has been designing interfaces where the whole view needs to scroll, but a portion is a List and the other portion is static. I run into this problem time and again so I was hoping someone has a good solution because we all know that embedding a List view inside ScrollView is a no-go within SwiftUI. It simply doesn't work. So what is a best practice when you need the whole screen to scroll, but a portion is a List? Use a navigation stack instead of a ScrollView? What if it's a child view of a navigation stack already?

Hello everyone! The Swift Student Challenge officially starts tomorrow (February 3rd), and I have a question. Am I allowed to use tools like Photoshop to create artwork for my project? I’d appreciate any clarification. Thanks in advance!

I would like to modify the content of a published LocationNode upon been clicked by the user. But unfortunately: func hitTest(_ point: CGPoint, options: [SCNHitTestOption : Any]? = nil) -> [SCNHitTestResult] returns an SCNNode array from which it is impossible to retrieve the original LocationNode being inserted in order to be able to modify it. Of course the solution would be to either insert the SCNNode corresponding to the inserted LocationNode in a custom class or conversely insert the identifier of the custom object as a tag of the LocationNode, in order to solve the issue. But both options seem impossible to implement. May anyone help me?