Updated iPhone to 26 beta 2, everything is ok but battery, battery is changed, not original. My phone can't charge higher than 1% and turns off every 5 minutes, even connecting to wireless charger and cable at the same time don't work, restored iPhone thru iTunes.I hope I will be able to install new beta without any problems because loving the new design, hoping for the best. Thanks. My FB-FB18327769

Hello developers, My question isn't directly related to app or software development, but this seems to be the most appropriate channel to possibly find the information I need. Context I work for an automotive company and I'm currently looking for Apple CarPlay certification guidelines. We're in the process of installing a multimedia system in a vehicle. The most viable solution would be to use the multimedia unit and microphone provided by our supplier, but with a custom wiring harness developed by our company to simplify the installation process. The multimedia unit, microphone, and the supplier’s harness are already certified for CarPlay. Question Would using our company’s custom wiring harness affect the existing CarPlay certification of the supplier’s product? Any information, contact, or suggestion on where I could find official guidance on this matter would be greatly appreciated. Thank you in advance!

I am trying to create a phone app that can receive incoming call notifications using CallKit, as described in Apple's CallKit documentation. Added the com.apple.developer.calling-app entitlement in my .entitlements file. Implemented CXProvider and set up the delegate methods (provider:perform: and providerDidReset). Added UIBackgroundModes with voip in Info.plist. Configured CXProviderConfiguration to support phone numbers. I expected to receive incoming call notifications when my app was set as the default calling app. However, I am not receiving any notifications when an incoming call arrives. How can I properly detect and handle incoming calls in my default calling app? Is there any additional configuration required for iOS 18.2+?

In preparing my ipad 7th gen for resale, I factory reset and now it will not power up. Tried hard reset, new cables, different computer. iTunes does not recognize the ipad yet device manager shows it hooked to usb port. Any advice? Thanks!

Hi, I needed some help in understanding the crash logs which is as below. Any help is very much appreciated. Translated Report (Full Report Below) Process: WindowServer [440] Path: /System/Library/PrivateFrameworks/SkyLight.framework/Versions/A/Resources/WindowServer Identifier: WindowServer Version: 600.00 (???) Code Type: ARM-64 (Native) Parent Process: launchd [1] User ID: 88 Date/Time: 2025-03-13 12:58:55.0091 +0800 OS Version: macOS 15.3.1 (24D70) Report Version: 12 Anonymous UUID: C795BDC3-66F0-6CF9-7533-B788D0B2DD80 Sleep/Wake UUID: 6F927AA6-3C7B-4EE9-AB68-B77F0D1D622A Time Awake Since Boot: 4400 seconds Time Since Wake: 996 seconds System Integrity Protection: enabled C

Upgraded my M1 Mac mini from MacOS Tahoe 26 Beta to Beta 2. Prior to the update I had no problem connecting to the Max mini from my MacBook Pro M2 running Now, attempting to connect to the Mac mini from a MacBook Pro M2 running Sequoia 15.5. After the update, I can enter my password, but then I am disconnected with the error "This Mac was unable to start a High Performance connection to the Mac mini" and to "change the screen sharing type to standard and try again" Connecting via a "Standard" connection showed that the Window Server failed.

hi team To continue testing Xcode 26 beta for our POS project's compatibility with the upcoming iOS 26 release in September, we’ve been running trials on various simulators. While the app works fine on iOS 18 simulators (iPad Pro/Air), it fails to launch on iOS 26-based iPad simulators with the following error: "libswiftWebKit.dylib library is not loaded"...... SquareReaderSDK Reason: tried: '/Users/username/Library/Developer/Xcode/DerivedData/ProjectnamePOS-buqsthxxbyqalydvfpxruhzgmymf/Build/Products/Debug-iphonesimulator/libswiftWebKit.dylib (Detailed logs are shared below.) Is there a known fix for this issue, or is a resolution expected in an upcoming beta release? dyld[34660]: Library not loaded: /usr/lib/swift/libswiftWebKit.dylib Referenced from: <BA066DAA-6AD6-3622-9A40-08C1600B0DC6> /Users/username/Library/Developer/CoreSimulator/Devices/3F807800-D684-4398-89DC-1AEC1747A99A/data/Containers/Bundle/Application/5327A260-4241-48F6-85C2-A7E0E0F152E3/Projectname.app/Frameworks/SquareReaderSDK.framework/SquareReaderSDK Reason: tried: '/Users/username/Library/Developer/Xcode/DerivedData/ProjectnamePOS-buqsthxxbyqalydvfpxruhzgmymf/Build/Products/Debug-iphonesimulator/libswiftWebKit.dylib' (no such file), '/Library/Developer/CoreSimulator/Volumes/iOS_23A5260l/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 26.0.simruntime/Contents/Resources/RuntimeRoot/usr/lib/system/introspection/libswiftWebKit.dylib' (no such file), '/Library/Developer/CoreSimulator/Volumes/iOS_23A5260l/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 26.0.simruntime/Contents/Resources/RuntimeRoot/usr/lib/swift/libswiftWebKit.dylib' (no such file), '/usr/lib/swift/libswiftWebKit.dylib' (no such file, not in dyld cache), '/Library/Developer/CoreSimulator/Volumes/iOS_23A5260l/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 26.0.simruntime/Contents/Resources/RuntimeRoot/usr/lib/libswiftWebKit.dylib' (no such file) Library not loaded: /usr/lib/swift/libswiftWebKit.dylib Referenced from: <BA066DAA-6AD6-3622-9A40-08C1600B0DC6> /Users/username/Library/Developer/CoreSimulator/Devices/3F807800-D684-4398-89DC-1AEC1747A99A/data/Containers/Bundle/Application/5327A260-4241-48F6-85C2-A7E0E0F152E3/Projectname.app/Frameworks/SquareReaderSDK.framework/SquareReaderSDK Reason: tried: '/Users/username/Library/Developer/Xcode/DerivedData/ProjectnamePOS-buqsthxxbyqalydvfpxruhzgmymf/Build/Products/Debug-iphonesimulator/libswiftWebKit.dylib' (no such file), '/Library/Developer/CoreSimulator/Volumes/iOS_23A5260l/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 26.0.simruntime/Contents/Resources/RuntimeRoot/usr/lib/system/introspection/libswiftWebKit.dylib' (no such file), '/Library/Developer/CoreSimulator/Volumes/iOS_23A5260l/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 26.0.simruntime/Contents/Resources/RuntimeRoot/usr/lib/swift/libswiftWebKit.dylib' (no such file), '/usr/lib/swift/libswiftWebKit.dylib' (no such dyld config: DYLD_SHARED_CACHE_DIR=/Library/Developer/CoreSimulator/Caches/dyld/24F74/com.apple.CoreSimulator.SimRuntime.iOS-26-0.23A5260l/ DYLD_ROOT_PATH=/Library/Developer/CoreSimulator/Volumes/iOS_23A5260l/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 26.0.simruntime/Contents/Resources/RuntimeRoot DYLD_LIBRARY_PATH=/Users/username/Library/Developer/Xcode/DerivedData/ProjectnamePOS-buqsthxxbyqalydvfpxruhzgmymf/Build/Products/Debug-iphonesimulator:/Library/Developer/CoreSimulator/Volumes/iOS_23A5260l/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 26.0.simruntime/Contents/Resources/RuntimeRoot/usr/lib/system/introspection DYLD_INSERT_LIBRARIES=/Library/Developer/CoreSimulator/Volumes/iOS_23A5260l/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 26.0.simruntime/Contents/Resources/RuntimeRoot/usr/lib/libLogRedirect.dylib:/Library/Developer/CoreSimulator/Volumes/iOS_23A5260l/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 26.0.simruntime/Contents/Resources/RuntimeRoot/usr/lib/libBacktraceRecording.dylib:/Library/Developer/CoreSimulator/Volumes/iOS_23A5260l/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 26.0.simruntime/Contents/Resources/RuntimeRoot/usr/lib/libMainThreadChecker.dylib:/usr/lib/libRPAC.dylib:/Library/Developer/CoreSimulator/Volumes/iOS_23A5260l/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 26.0.simruntime/Contents/Resources/RuntimeRoot/usr/lib/libViewDebuggerSupport.dylib DYLD_FRAMEWORK_PATH=/Users/username/Library/Developer/Xcode/DerivedData/ProjectnamePOS-buqsthxxbyqalydvfpxruhzgmymf/Build/Products/Debug-iphonesimulator DYLD_FALLBACK_FRAMEWORK_PATH=/Library/Developer/CoreSimulator/Volumes/iOS_23A5260l/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 26.0.simruntime/Contents/Resources/RuntimeRoot/System/Library/Frameworks DYLD_FALLBACK_LIBRARY_PATH=/Library/Developer/CoreSimulator/Volumes/iOS_23A5260l/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 26.0.simruntime/Contents/Resources/RuntimeRoot/usr/lib```

m personal iPhone is managed by an Unauthorized and Unknown mdm management team, The profile isn’t showing up in VPN Settings and I can’t remove them from having Remote access and control over my Personal Device! I’ve SPENT MANY MONTHS TRYING TO GET SUPPORT VIA EMAILING APPLE DEVELOPER AND SPEAKING TO APPLE SUPPORT WHICH HAS BEEN EXTREMELY EXHAUSTING AND HUMILIATIN! I’ve resorted to contacting Internet crime websit, the federal trade commissio, Better business bureau and Consumer Affairs to file an online complaint against Apple for not complying with their Security and Privacy policy for consumers accounts! Because of this unauthorized and unknown mdm devi management profile I don’t have COMPLETE CONTROL OVER MY OWN IPHONE! !

Can anyone tell me why "Classroom (System Settings)" is running on my Mac? I found this post, but the author never fully explained what was going on: https://developer.apple.com/forums/thread/734270 Clicking on "inspect" tells me it was launched by launchd.

Hey there, Just writing here to say how I do enjoy the latest update, but I can’t seem to run it on my iPhone 14 Pro well because it tends to overheat. i can deal with the stuttering issues and app crashes, that’s understandable, but for some reason the hardware seem to really heat up after normal use (scrolling on social media platforms). oh also, I do think rolling back your phone‘s software should be a simpler process as well. It’s not impossible, but the demand of a computer in reinstating a previous backup when iCloud backups your device through WiFi seems like a missed opportunity. Okay. Thank you for reading.

I recently wrote an article on getting gtk auto complete/syntax highlighting on macOS its a genuinely fun hobby to make portable software, and this method will ultimately help in porting software to the macOS platform a copy and paste: before I continue, I want to mention that emacs auto completion, using company-mode, is rather slow when it comes to parsing a ton files, and in some configurations, especially recursively when it comes to parsing and displaying functions and macros, even when using the semantic auto complete system, but I do believe it speeds up when you initially parse and save to ctags or when you build a semanticdb, functions such as g_signal_connect() and macros such as G_APPLICATION however, did not work with company modes auto complete, but worked with flycheck on the fly syntax checking, using this method, and I haven’t had time to perfect an emacs configuration; maybe some time next week you will need gtk installed from brew or ports, since gtk has trouble compiling from source on some Mac configurations. this method works with whatever version of gtk is reported by pkg-config –cflags (pkg-config --cflags gtk. you will also need pkg-config installed, multiple installations of gtk can be used and utilized but the emacs plugins you’ll need are (and you’ll need to connect to Melpa using list-packages https://melpa.org/#/getting-started to have these automatically downloaded and configured): company company-c-headers flycheck flycheck-pkg-config exec-path-from-shell (this allows x11emacs to read the shells configuration, may be option for terminal based emac uses) optional: function-args-mode, but when fa-show-auto is used, it breaks themes in emacs download all of them through M-x list-packages (which means pressing alt+x, macOS option+x, which should issue an input on the bottom of emacs, where the status bar is), after that, type list-packages or use auto completion, aka ctrl+tab to cycle through possible candidates open a c file (C-f ~/test.c) (which is control+x, macOS control+x) type in: M-x semantic-mode M-x semantic-customize-system-include-path in semantic-customize-system-include-path, add the path to the gtk version you intend to develop for, in my case /opt/homebrew/Cellar/gtk4/4.16.12/include/gtk-4.0 using the text based interface; you should be able to use your mouse (click ins after where it says /usr/include. semantic is included in emacs. options are automatically saved at command) M-x exec-path-from-shell-initialize M-x flycheck-mode M-x flycheck-pkg-config in flycheck-pkg-config, press enter, and then type the name of the version of gtk that provides valid input from pkg-config (ie gtk4) M-x global-company-mode if you need to bind ctrl+tab to auto complete, you can add this to your config (~/.emacs.d/init.el) (global-set-key (kbd “C-”) ‘company-semantic) this will do most of the grunt work when plugins are installed (ctrl-tab shows a window to auto complete, ctrl+` (thats the key before 1, with shift it becomes ~) shows function argument. fa-show-auto automatically shows function prototypes, but can break emacs themes: (require ‘package) (add-to-list ‘package-archives ‘(“melpa” . “https://melpa.org/packages/&#8221;) t) ;; Comment/uncomment this line to enable MELPA Stable if desired. See package-archive-priorities ;; and package-pinned-packages. Most users will not need or want to do this. ;;(add-to-list ‘package-archives ‘(“melpa-stable” . “https://stable.melpa.org/packages/&#8221;) t) (package-initialize) (global-company-mode t) (global-flycheck-mode t) (semantic-mode t) (function-args-mode) (global-company-mode t) (global-flycheck-mode t) (semantic-mode t) (function-args-mode) (global-set-key (kbd “C-”) ‘company-semantic) (global-set-key (kbd “C-`”) ‘fa-show) if you need to compile from inside emacs, I would make a Makefile according to the gtk tutorial on gtk.org I also have another article on getting Xcode to work with gtk, which is more reliable: https://unix-world.com/2025/01/25/getting-gtk4-to-work-in-xcode-with-auto-complete-and-syntax-highlighting/ website is unix-world.com and I welcome any and all traffic !

Hi All, I searched for this feedback but didn't see it, so apologies if this has been covered by another thread. Exploring the new camera app, It doesn't seem to recognize that external storage has been connected, so the additional features that allow ProRes high frame rates will throw an error dialog stating that "to use this you need external storage" even when external storage is connected. Using the Files app, the phone recognizes the storage, and this is something I can do with this external storage device on the previous version of IOS. It is clear that this release of the camera has been rewritten significantly since the last version. Is it possible that this is an oversight, a bug, or just functionality that has not been completed? Interested if anybody else is seeing this, or if it is just my setup.

I'm working on an iOS/iPadOS app and need to determine programmatically whether the device is a Shared iPad as configured through Apple School Manager (ASM). Shared iPads allow multiple users to sign in with Managed Apple IDs and are typically used in educational environments. I want to identify this configuration at runtime within my app. I’ve looked into UIDevice, NSProcessInfo, and MDM-related APIs but haven't found a reliable way to detect whether the current device is a Shared iPad. Is there an API or method to check if the current iPad is configured as a Shared iPad (via ASM)? Any guidance or code examples would be appreciated.

Good day. Friends, please help. I installed iOS 26 Betta version. During the update, there was a power surge and the Internet went out. The download was difficult but it went through. Now I can't check for updates. Write connection error and checking for updates. I can't roll back to 18.5. It gives an error through the computer. Please help. Thank you in advance.

Hi, Am using fastlane to upload into TestFlight. Am able to successfully upload the build without any issues. For Testing Internally , I want to upload the build into App Store Connect but I should restrict it on submitting to App Store. ( This is possible when i distribute the app via TestFlight Internal Only from XCode -&gt; Organizer -&gt; Distribute App (Select option with TestFlight Internal Only). I want to achieve the same using either Transporter/ fastlane. I tried setting buildAudienceType to INTERNAL_ONLY as per https://developer.apple.com/documentation/appstoreconnectapi/buildaudiencetype but it is not working. Can you suggest how i can achieve this via fastlane?

Hello Apple Developer Community, I'm encountering a persistent issue while attempting to create a new partition on my Mac, and I'm hoping to get some assistance or insights from anyone who might have faced a similar problem. Issue Description: I'm trying to partition my internal drive. I initially used Disk Utility.app for this purpose. The partitioning process starts, but consistently freezes when it reaches approximately 10-20% completion. I've left it running overnight (for over 9 hours), but there was no progress, and the application remained unresponsive at that percentage. After several attempts with Disk Utility, I decided to try using the diskutil commands in Terminal to see if that would yield a different result. I used commands such as diskutil apfs resizeContainer and diskutil partitionDisk. Unfortunately, these commands also result in the same behavior: the process starts, reports progress up to about 10-20%, and then completely freezes without any further output or completion, requiring me to force-quit Terminal. Mac Model: Apple M4 Pro MacOS Version: Sequoia 15.6

iPadOS 26 Dev Beta 1 - need to do a restore via DFU mode. I made sure iPad in normal mode shows up in Finder and I can see device details. When I boot into DFU mode (I have kept the ipad connected to mac), it does not show up in Finder. No matter what combination of plugging/unplugging cables, rebooting, again into DFU mode, it will not show up in Finder. Looking for steps to resolve this, or do I need to wait until beta 2 to resolve this?

So recently, last week, ive updated to the Dev Beta of ios 26. This began the very issue of my cellular data. I woke up to a warning symbol where my cellular bars should be, telling me there was something wrong with my antenna or carrier when in reality there was no problem with any of those problems and took up about 53% of my storage. This is absolutely insane and unacceptable.

After doing a software update I can only view iMessages older than 12hrs (from a single contact) if the other person replies to and older message. Every time I leave the Massages app and go back in the issue occurs again.

On recent versions of macOS (including current betas), when enabling Internet Sharing from Ethernet to Wi-Fi, the configured WPA2/WPA3 password is ignored and the shared network is broadcast as an open (unsecured) network. Steps to Reproduce: Connect Mac to Ethernet via USB/LAN adapter Go to System Settings > General > Sharing > Internet Sharing Set up Wi-Fi options with a valid WPA2/WPA3 password Enable Internet Sharing Expected Behavior: Devices should see a password-protected Wi-Fi network with a lock icon and require authentication. Actual Behavior: The network appears unsecured (no lock icon) Devices like iPhone connect without entering a password This can be verified immediately from iOS Wi-Fi settings Additional Notes: Reproducible across macOS 15.5 RC and 16.0,26.0 Developer Beta Feedback has been submitted via Feedback Assistant multiple times This is a serious security risk if used in public or shared environments Has anyone else experienced this? Any known workarounds besides terminal-level defaults or Plist edits? Thanks in advance!