On wake from sleep the Mac Studio's Desktop picture is shown in actual resolution instead of stretched to fit screen. For example, a picture which is 2059 × 1371 is shown at that resolution on a 5K Retina screen and so only fills about 60% of the screen area. It starts with the picture positioned in the top left corner but sometimes moves down the screen. This behaviour does not change if the screen is scaled up or down – the picture size is also scaled. Notice that icons on the Desktop are displayed in the correct position. At the same time, the Dock is shown at the bottom of the picture instead of at the bottom of the screen. Usually, the Desktop redisplays correctly. But increasingly, the only solution is to log out and in again. This might be related to my other question on the Desktop picture Pref Pane. See attached example which is a full screen capture i.e. command-shift-3 (with my personal details obscured):

Open an existing contact Click Edit —> Add Birthday Select Date and Save Close the contact app Come back to the same contact, the birthday is gone.

Each time I try to start Signal. It immediately crashes.

I want the wkwebview to revert to its previous state when I restart it.

Hello, One of our apps has been rejected under Guideline 4.3 for spam. Our studio has been on the App Store for 10+ years and this particular app has been available for over two years without previous issue. We have submitted a couple responses to the original rejection outlining why we think our app is unique and not spam and unfortunately we have been rejected. I have also submitted an appeal and requested a phone call. This is compounded by a live issue happening in our app right now that requires a build to unblock. I added that to our review notes for submission but was rejected. We believe we have been flagged as spam in error and would like to release builds to our active players ASAP to get them unblocked and provide further value to them. Beyond submitting an appeal and requesting a call is there anything else I can do?

help me how to fix this issue !!

I have a Logitech Yeti GX microphone, which is working, but i am unable to fully use all its features because of a driver issue. Logitech states the following to resolve "The program Logitech G Hub Driver installer tried to load a new driver extension. To enable this extension, open Systems Settings>General>Login Items & Extensions>Logitech G Hub HID Driver Extension> Toggle on.... that appears to be simple enough... only problem is that Driver Extension doesnt exist as an option for me. Any thoughts as to why not? Thanks for your help.

Please provide me with an access code to TestFlight

Apple has a massive opportunity to improve iOS for business users with ARM (Apple Relationship Manager)—a built-in tool that allows professionals to log, summarize, and integrate calls & messages into CRM workflows. Many professionals (salespeople, executives, entrepreneurs) use iPhones for business, but there’s no easy way to track conversations, categorize interactions, or integrate messages with a CRM. ARM would solve this by allowing: ✅ AI-powered call summaries (users get a suggested summary after each call, which can be reviewed and tagged). ✅ iMessage/SMS tagging (users can hold down messages to assign a sentiment or create a follow-up). ✅ CRM Integration (ARM logs could sync with HubSpot, Salesforce, etc.). How ARM Would Work: • Users could tap an “ARM Accept” (green accept button with the ARM logo instead of white phone symbol) button before a call to activate AI-powered summarization. • After the call, users would review/edit the summary and log a sentiment (e.g., “Needs Follow-Up”). • In iMessage, users could long-press messages to summarize conversations and tag key interactions for both blue and green messages. • ARM would keep everything on-device, ensuring privacy and security. Since Apple Intelligence is already introducing AI-powered features, ARM could make iPhones the ultimate business communication tool while keeping everything private and secure. If you also want Apple to build this, submit feedback at Apple Feedback and comment here to show support!

Background: We are using Apple WeatherKit for an app to fetch future weather data specialty cloudCover and condition and pretipitationChance from the Overnightforecast data from weatherResponse.dailyForecast.forecast array object. Code Sample: On xcode on Swift and Swift UI using Apple WeatherKit task{ do{ let weatherResponse= try await self.weatherService.forecast(for: latLong) let cloudCover = weatherResponse.dailyForecast.forecast[0].overnightforecast.cloudCover Issue: While we are on debug mode, we can literally see overnightforecast.cloudCover data (as well as condition and pretipitationChance) is available under from index 0 to index 10 of weatherResponse.dailyForecast.forecast array object but when we are trying to assign this property, its throwing error as "overnightforecast object not present under weatherResponse.dailyForecast.forecast array object" Attachment:

Hi - I've been using logic for a few years now. Three days ago I whilst opening it, a pop up said MIDICORE was not working and I haven't been able to fix it since. I read online that booting up in safe mode + opening audio MIDI set up would fix it, thing is audio MIDI set up wont load up. Anyone knows how I can fix it? I am on the verge of tears as I cannot seam to find any information online about audio MIDI set up not opening. And I cannot seam to fix the MIDI issue without it. Thanks!

As explained above only ended up being about to use voice and text

For the subscription API, we’re using the Get All Subscription Statuses API to replace the deprecated verifyReceipt method. To determine if a user has canceled their subscription, we’re using the expirationIntent key from JWSRenewalInfo data. However, we’ve noticed that we sometimes receive this key and other times not. We’re also facing an issue with the offertype key. We use this key to determine if a user is currently in the introductory offer, the promotion offer, or neither. To obtain this key, we’re using JWSTransaction, but we occasionally receive it and other times not. Note: These issues are being tested in the sandbox environment. Thank you.

I've just watched "Meet Object Capture for iOS wwdc23" and have installed and run the app. After taking > 120 images of my model I clicked the "Finish" button and the app is now showing a spinning pinwheel. It has been running for about 22 hours. Is it going to finish or should I kill it? TIA!

My experiments have managed to damage my installed system and I am getting alerts that it needs to be re-installed. But when I try to get Recovery to re-install the same system, it refuses. It says my installed system is newer than what it could install. In general, what is the minimum I would need to change or remove from my current system to convince Recovery to re-install? For example: Could I just delete a certain small group of System files? Could I Erase only the Macintosh HD Volume in the container, leaving the Macintosh HD - data Volume intact? I really would rather not ERASE everything and restore it all from backups, just to satisfy Recovery that it will not be writing older over newer. It won't be, but since I have available applied updates, the version available for Restore is currently older than the damaged version on the drive.

Another developer tried to start a screen-sharing session with me on my M1 MacBook Air this morning (Sequoia 15.3). He reported however that another session was already under way on my machine. I looked in System Settings and found that the "Screen Sharing" setting was grayed out, with the notation that "This service is currently being controlled by the Remote Management service". Access to the service is disabled however, and I have no way of turning it off. It's possible that the person who tried to help me got this session started, and that it then got aborted in some irregular way, but he see no indication of that and says there is no connection between us as seen from his end. This makes me nervous security-wise. Is there some way I can turn this off and ensure that I am not being screen-shared against my will, as it were? TIA, Howard

Has anyone had the issue where you try to sign in and you have to repetitively put you log in in to finally take? When it does take you set up your syncing options but your photo's, Files and everything never sync. I've updated all my system files on my computer. I even did a clean install of my windows operating system and installed it and it's doing the same thing. Any suggestions?

I hope questions about third party APIs are allowed. If not I guess a delete is in order. That said.... I am looking to do an app for dog owners, trainers and enterprises such as shelters & boarding, and a couple of features require access to one or more cameras in real time. So I have been looking for hardware that provides an API and coming up empty. So far as I can tell none of the major pet cam companies, like Furbo, Petcube or Eufy. Even security cameras like the TP-Link Tapo doesn't seem to. Am I just failing epically in my search formulation, or are all these companies playing the printer game and selling the camera cheap and making all their money in the monthly subscription to actually be able to use the hardware, and keeping that to themselves? And, can anyone recommend decent to good third party hardware that does provide a Swift API? Or am I better off just targeting the use of iPhone & iPad and Mac cameras? It's not ideal, but it's better than nothing.

Process: Pages [24164] Path: /Applications/Pages.app/Contents/MacOS/Pages Identifier: com.apple.iWork.Pages Version: 14.3 (7042.0.76) Build Info: Pages-7042000076000000~4 (1A80s) App Item ID: 409201541 App External ID: 869633787 Code Type: ARM-64 (Native) Parent Process: launchd [1] User ID: 501 Date/Time: 2025-02-03 10:33:48.0108 -0500 OS Version: macOS 15.0 (24A5264n) Report Version: 12 Anonymous UUID: CADF4BC4-9940-34D7-7009-116B6231DC3E Sleep/Wake UUID: 74C42190-FF06-46AE-B3A5-A3EBD47E7F1F Time Awake Since Boot: 350000 seconds Time Since Wake: 720 seconds System Integrity Protection: enabled Crashed Thread: 0 Dispatch queue: com.apple.main-thread Exception Type: EXC_BAD_ACCESS (SIGSEGV) Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000 Exception Codes: 0x0000000000000001, 0x0000000000000000 Termination Reason: Namespace SIGNAL, Code 11 Segmentation fault: 11 Terminating Process: exc handler [24164] VM Region Info: 0 is not in any region. Bytes before following region: 4336156672 REGION TYPE START - END [ VSIZE] PRT/MAX SHRMOD REGION DETAIL UNUSED SPACE AT START ---> __TEXT 102748000-1039a0000 [ 18.3M] r-x/r-x SM=COW /Applications/Pages.app/Contents/MacOS/Pages Model: Mac14,2, BootROM 11881.0.80.0.2, proc 8:4:4 processors, 8 GB, SMC Graphics: Apple M2, Apple M2, Built-In Display: Color LCD, 2560 x 1664 Retina, Main, MirrorOff, Online Memory Module: LPDDR5, Hynix AirPort: spairport_wireless_card_type_wifi (0x14E4, 0x4387), wl0: Apr 22 2024 07:25:15 version 20.10.1110.0.8.7.176 FWID 01-f2e48c5b IO80211_driverkit-1302.55 "IO80211_driverkit-1302.55" May 30 2024 20:56:50 AirPort: Bluetooth: Version (null), 0 services, 0 devices, 0 incoming serial ports Network Service: Wi-Fi, AirPort, en0 USB Device: USB31Bus USB Device: USB31Bus Thunderbolt Bus: MacBook Air, Apple Inc. Thunderbolt Bus: MacBook Air, Apple Inc.

Crashed Thread: 0 Dispatch queue: com.apple.main-thread Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Termination Reason: Namespace SIGNAL, Code 6 Abort trap: 6 Terminating Process: Microsoft Excel [1618] Application Specific Information: stack buffer overflow Thread 0 Crashed:: Dispatch queue: com.apple.main-thread 0 libsystem_kernel.dylib 0x19da2b720 __pthread_kill + 8 1 libsystem_pthread.dylib 0x19da63f70 pthread_kill + 288 2 libsystem_c.dylib 0x19d97099c __abort + 136 3 libsystem_c.dylib 0x19d961e74 __stack_chk_fail + 96 4 Microsoft Excel 0x106a89f88 0x104bdc000 + 32169864 5 Microsoft Excel 0x106a89b74 0x104bdc000 + 32168820 6 Microsoft Excel 0x106acc2fc 0x104bdc000 + 32441084 7 Microsoft Excel 0x106a98cc4 0x104bdc000 + 32230596 8 Microsoft Excel 0x106a97c04 0x104bdc000 + 32226308 9 Microsoft Excel 0x106a897f4 0x104bdc000 + 32167924 10 Microsoft Excel 0x106a8731c 0x104bdc000 + 32158492 11 Microsoft Excel 0x105d69ac8 0x104bdc000 + 18406088 12 Microsoft Excel 0x1061bea10 0x104bdc000 + 22948368 13 Microsoft Excel 0x104dbc1b4 0x104bdc000 + 1966516 14 Microsoft Excel 0x104d828a8 0x104bdc000 + 1730728 15 Microsoft Excel 0x104d80ff8 0x104bdc000 + 1724408 16 Microsoft Excel 0x104d809b4 0x104bdc000 + 1722804 17 Microsoft Excel 0x104d808e0 0x104bdc000 + 1722592 18 Foundation 0x19ed394e8 __NSFireDelayedPerform + 372 19 CoreFoundation 0x19db66384 CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION + 32 20 CoreFoundation 0x19db66028 __CFRunLoopDoTimer + 1012 21 CoreFoundation 0x19db65b38 __CFRunLoopDoTimers + 356 22 CoreFoundation 0x19db4b520 __CFRunLoopRun + 1856 23 CoreFoundation 0x19db4a724 CFRunLoopRunSpecific + 588 24 HIToolbox 0x1a90a2530 RunCurrentEventLoopInMode + 292 25 HIToolbox 0x1a90a8348 ReceiveNextEventCommon + 676 26 HIToolbox 0x1a90a8508 _BlockUntilNextEventMatchingListInModeWithFilter + 76 27 AppKit 0x1a16b5034 _DPSNextEvent + 660 28 AppKit 0x1a20192d4 -[NSApplication(NSEventRouting) _nextEventMatchingEventMask:untilDate:inMode:dequeue:] + 688 29 AppKit 0x1a16a8060 -[NSApplication run] + 480 30 AppKit 0x1a167e854 NSApplicationMain + 888 31 dyld 0x19d6e4274 start + 2840 Thread 1: 0 libsystem_kernel.dylib 0x19da22f54 mach_msg2_trap + 8 1 libsystem_kernel.dylib 0x19da35604 mach_msg2_internal + 80 2 libsystem_kernel.dylib 0x19da2baf8 mach_msg_overwrite + 480 3 libsystem_kernel.dylib 0x19da2329c mach_msg + 24 4 merp 0x108eb7f74 0x108eb4000 + 16244 5 libsys