Hi! I found a UI bug in iOS 26.0 (23A5276f). When you swipe down from the top right to open Control Center and adjust brightness using the slider, everything looks normal. However, if you long-press the brightness slider, the brightness knob detaches from the base. The button becomes smaller while the frame remains the same, making the UI asymmetrical and misaligned. This happens consistently and is clearly a layout issue.

My current project is similar to Facebook In size. Is there an alternative to MVVM that will produce the same outcome without so many files. Performance is very poor.

Please expedite to Solve this bug , my Singpass is unable to launch in iOS 26. I believe this is more urgent than a new pride theme wallpaper 🏳️‍🌈

Hi all, Well Im about to publish an app for iOS and the process is almost done but I don't know how is it to publish the same for MacOS, I mean, I can generate the app file from my engine (Unity) and even run it, but from there what are the steps? do we need to pass this to Xcode too? if so please direct me to where its explained because I couldn't find it, thanks a lot for any help

[https://vimeo.com/manage/videos/1051990313) We are experiencing an issue where a user is unable to open our app on their iPhone 16 Pro Max running iOS 18.3. When the user selects the app, it begins to scale to screen size but then fades away without fully opening. It is unclear whether this is a crash or another issue. To troubleshoot, we created a simplified version of the app containing only a single screen displaying "Hello, World." The user experiences the same issue with this version, leading us to believe there may be a device-specific setting or compatibility issue at play. Steps the User Has Tried: Checked device storage – over 200GB available Offloaded and reinstalled the app Deleted and reinstalled the app Updated to iOS 18.3 Forced restart of the device Reset network settings Turned off VPN Despite these steps, the issue persists. We would appreciate any guidance on potential causes or troubleshooting steps to resolve this issue.

Hello, I’m facing an issue with geofencing events in my app. When the app is killed and not opened for 2–3 days, the geofencing event is not triggering when I re-enter the geofenced area. I’ve made sure that all necessary permissions (location, background refresh, etc.) are properly set in the app settings. Has anyone else experienced this? Is there a solution or workaround to ensure that geofencing works as expected even after the app has been killed for several days? Any help or insight would be greatly appreciated! Thanks in advance!

Like I said in the title, it looks like MetalTools.framework is missing or corrupted. I think I saw that the symbolic link was broken. They look like aliases in the finder, but I can't find the original. This was a problem with Ventura (using the last compatible Xcode version) and Sequoia 15.2 (Xcode 16.2). I didn't use Xcode before that. Note that none of my apps need Metal API (I don't think). I only noticed it when Xcode gave an error regarding Metal. Sorry this is so long; I hope the Terminal info will help. I don't want to reinstall Sequoia and this has been a problem since at least Ventura. Recommendations? ls -l /System/Library/PrivateFrameworks/MetalTools.framework/ total 0 lrwxr-xr-x 1 root wheel 27 Dec 7 01:11 MetalTools -> Versions/Current/MetalTools lrwxr-xr-x 1 root wheel 26 Dec 7 01:11 Resources -> Versions/Current/Resources drwxr-xr-x 4 root wheel 128 Dec 7 01:11 Versions ls -la /System/Library/PrivateFrameworks/MetalTools.framework/ total 0 drwxr-xr-x 5 root wheel 160 Dec 7 01:11 . drwxr-xr-x 1885 root wheel 60320 Dec 7 01:11 .. lrwxr-xr-x 1 root wheel 27 Dec 7 01:11 MetalTools -> Versions/Current/MetalTools lrwxr-xr-x 1 root wheel 26 Dec 7 01:11 Resources -> Versions/Current/Resources drwxr-xr-x 4 root wheel 128 Dec 7 01:11 Versions codesign -v /System/Library/PrivateFrameworks/MetalTools.framework/MetalTools /System/Library/PrivateFrameworks/MetalTools.framework/MetalTools: No such file or directory ls -la /System/Library/PrivateFrameworks/MetalTools.framework/Versions/ total 0 drwxr-xr-x 4 root wheel 128 Dec 7 01:11 . drwxr-xr-x 5 root wheel 160 Dec 7 01:11 .. drwxr-xr-x 4 root wheel 128 Dec 7 01:11 A lrwxr-xr-x 1 root wheel 1 Dec 7 01:11 Current -> A ls -la /System/Library/PrivateFrameworks/MetalTools.framework/Versions/A/ total 0 drwxr-xr-x 4 root wheel 128 Dec 7 01:11 . drwxr-xr-x 4 root wheel 128 Dec 7 01:11 .. drwxr-xr-x 10 root wheel 320 Dec 7 01:11 Resources drwxr-xr-x 3 root wheel 96 Dec 7 01:11 _CodeSignature Note - -rwxr-xr-x 1 root wheel MetalTools should be in the above list (according to ChatGPT) system_profiler SPDisplaysDataType Intel UHD Graphics 630 and AMD Radeon Pro 5500M (includes: Metal Support: Metal 3 Playground code => "Metal is supported." Default device: Apple iOS simulator GPU. Thanks, Ashley

Hi all, I’m running into a persistent build issue with my Swift project ORSOFINAL after migrating from Xcode stable to Xcode-beta.app (June 2025 version). ⸻ 💥 Errors displayed: 1. C99 was enabled in PCH file but is currently disabled 2. module file .../ModuleCache.noindex/SwiftShims-AXUM98L131W4...pcm cannot be loaded due to a configuration mismatch with the current compilation 3. missing required module 'SwiftShims' ⸻ 🛠 What I’ve already tried: • xcode-select -s /Applications/Xcode-beta.app/Contents/Developer • Deleted ~/Library/Developer/Xcode/DerivedData, ModuleCache.noindex, Archives, and Products • Ran sudo xcodebuild -runFirstLaunch • Clean Build Folder in Xcode-beta • Verified Command Line Tools setting points to Xcode-beta ⸻ ❓Looking for guidance on: • Whether this is a known bug in Xcode-beta • If SwiftShims/PCM conflicts are expected between versions • Best practices to safely migrate from Xcode stable to beta for Swift-based projects Any advice is much appreciated. Thanks, Mathéo

I've just watched "Meet Object Capture for iOS wwdc23" and have installed and run the app. After taking > 120 images of my model I clicked the "Finish" button and the app is now showing a spinning pinwheel. It has been running for about 22 hours. Is it going to finish or should I kill it? TIA!

I've been working on my mobile app project using Expo. Yesterday, when I tried to run the app again, the Expo Go in the iOS simulator got stuck on the screen showing "New update available, downloading..." and then crashed. I'm not sure what went wrong. It only provides a long error report. I ran an EAS build, which completed successfully, so I suspect the issue might be with the iOS simulator or Expo Go itself. Please help me out :(

I set iOS 26 to install overnight, put my iPhone 16 Pro on the MagSafe charger, watched it charge just fine, and went to sleep. When I woke up the iPhone showed the “plug into power” dead battery screen. I took it off MagSafe and put it back on. A half hour later the phone was warm but still wouldn’t power on, just showed the battery screen with a little red in it. I took it off MagSafe and plugged it into my iPad charging brick with USB cable to give it more power, still it did not turn on. I tried holding all the buttons to try to force a restart but didn’t work. For anyone else encountering this, do this to enter DFU mode and restore it. I had to do it a few times before I got the timing right. Plug into your Mac and open Finder (or apparently a PC with Apple Devices or iTunes) Press and quickly release volume up Press and quickly release volume down Press and hold right side button When the battery disappears and screen goes black, hold volume down and continue holding side button After a couple seconds release the side button and continue holding volume down A prompt to allow connecting to the iPhone should appear after a couple seconds, click Allow, and it’ll say the iPhone entered DFU mode - proceed to restore the firmware

Is anyone else having trouble posting to the forums? I can't get past form validation.

For the last week or i no longer receive text verification codes from outside sources like my bank, credit card issuers etc. I’m on the iPhone beta testing OS software…

The latest Beta update 18.5.4 has caused connectivity problems with my car (Skoda Enyaq) whereby there is no connection via Bluetooth or the cars internal WiFi. Also contacts will not download to the care which is very frustrating.

Hello Apple Developer Community, I'd like to propose a system-wide enhancement for future versions of iOS: the integration of native utility apps — Calculator, Compass, Voice Memos, Magnifier, Measure, Weather, and Translate — into a single unified app, tentatively called Apple Assist. The vision is to provide: A modular interface where users can enable/disable tools as needed. Smarter workflows with proactive suggestions based on context (time, location, task). AI-powered interaction through voice and Apple Intelligence (Advanced Siri). Benefits: Reduces icon clutter on the Home Screen. Simplifies the user experience with a single access point. Creates opportunities for automation and accessibility. Imagine saying: “Hey Siri, record a quick note and measure the table” — and the app smartly loads those modules on demand. Would love to hear feedback from the community — and whether Apple might consider something in this direction for iOS 19 or beyond. Best regards, Jose Luiz Horta Barbosa Maurity Cruz

Hello, i am currently running iOS 18.4 Public Beta (22E5232a) on an iPhone 16 Pro and i have problems with getting emails in the native mail app. i cannot receive any email from some of my email addresses. there is an “account error“ message that says: “Cannot get mail, The connection to the server failed.” When i enter my password again in settings it works for 1-2 days then stop working. On my iPhone X running iOS 16.7.10 it works perfectly. Only bugs on my iPhone 16 Pro.

hi. I have a MacPro 2019, and I'm running Monterey at the moment. I have three screens. Two 4k screens, and a XDR in the center of them. My MacPro 2019 boots with the left screen showing the startup and login screen. I've previously had it boot to my XDR before the others. I'm not entirely sure why it moved to the left, but I need it back on the center screen. We used to just drag a happy mac icon from screens in the displays system preference. I don't see any method to change this startup and login screen. How do I choose the permanent bootup and startup screen (as my XDR!). Thanks. Dave

We have observed an issue where upgrading an iPhone to iOS 18.4 causes installed apps to revert to significantly older versions. For example, if the App Store version is 1.0.284 and the user had 1.0.283 installed before the upgrade, after updating to iOS 18.4, the app version reverts to 1.0.208—which is nearly a year old. We suspect this may be related to iCloud backup restoration. Has Apple encountered similar cases, and is there a known resolution for this issue?

Dear Apple Developer Community, I hope this message finds you well. I'm seeking guidance regarding an issue with my Apple Developer account and the future status of my app. Issue Summary: Account Status: My Apple Developer account has been locked (cannot be used) without any clear reason. Despite contacting both Apple Support and Apple Developer Support, I haven't received a workable solution to regain access. App Status: Currently, my mobile app remains visible and downloadable on the Apple App Store. Concerns: Future of the App: I'm concerned about the future availability of my app. I've heard that apps associated with locked or inactive developer accounts might be archived or removed after a certain period. Is this accurate? If so, what is the typical timeframe for such actions? Similar Experiences: Has anyone in the community encountered a similar situation with their developer account being locked and cannot be used? If so, were you able to resolve it, and how? I appreciate any insights or advice from those who have faced similar challenges or have knowledge in this area. Your assistance would be invaluable in helping me navigate this situation.

Is there a way to check whether third-party code can be inserted into parts of the ARM CPU architecture from outside? I have the paranoid impression that my MacBook Pro, M2 processor is being manipulated from outside. For example: Safari, when opened, displays pages scaled down without my conscious intervention, when clicked on the original size it scales back to normal for a short time and then implodes again; I use the navigation bar on the left excessively, it is my most important tool in Safari, today it was impossible to insert a link using drag & drop, the bar scrolls up or down very quickly; a behavior that I only know from Intel processors. For example, notes, I encrypted an important note, no problem even though photos and links are inserted, yesterday I could no longer open the note, neither on the MacBook Pro nor on the iPhone. When opening the notes app in the terminal on the MacBook Pro, an EXEC_CRASH report was generated. I have a terrible suspicion that the Apple branch in Munich is tampering with the devices and software of users in Germany. Sorry, I'm a big fan of Apple and its products, but this is very spooky. I just wanted to share my distrust with you!