What is the proper payload for the FDEFileVault? Do I need to provide a user password in the payload to proceed with turning on the FileVault? Isn't that a privacy issue? Why UserEntersMissingInfo does not work for me? How to properly turn off FileVault - every try failed? Below I attach tested payloads and results. Test 1: Enable: "On" Result 1: Error ErrorCode: -319 LocalizedDescription: The ‘FileVault Settings’ payload could not be installed. User authentication failed. Test 2: Enable: "On" Username: "username on a device" Result 2: Error ErrorCode: -319 LocalizedDescription: The ‘FileVault Settings’ payload could not be installed. User authentication failed. Test 3: Enable: "On" Username: "username on a device" Password: "password of the user" Result 3: Success: FileVault turned On Test 4: After previously turning On FileVault successfully after restarting a machine. Enable: "Off" Result 4: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help. Test 5: Enable: "On" UserEntersMissingInfo: True Result 5: Error ErrorCode: -319 LocalizedDescription: The ‘FileVault Settings’ payload could not be installed. User authentication failed. Test 6: Enable: "On" Username: "username on a device" UserEntersMissingInfo: True Result 6: Error ErrorCode: -319 LocalizedDescription: The ‘FileVault Settings’ payload could not be installed. User authentication failed. Test 7: This is example payload from: https://developer.apple.com/documentation/devicemanagement/fdefilevault#Profile-Example Defer: True Enable: "On" ShowRecoveryKey: True UseKeychain: False UseRecoveryKey: True UserEntersMissingInfo: False Result 7: Success: FileVault turned On Test 8: Same as test 4, but after turning on like test 7. Test 9: Defer: True Enable: "Off" ShowRecoveryKey: True UseKeychain: False UseRecoveryKey: True UserEntersMissingInfo: False Result 9: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help. Test 10: Defer: True Enable: "Off" ShowRecoveryKey: True UseKeychain: False UseRecoveryKey: True UserEntersMissingInfo: True Result 10: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help. Test 11: Defer: True Enable: "Off" ShowRecoveryKey: True UseKeychain: False UseRecoveryKey: True UserEntersMissingInfo: True DeferForceAtUserLoginMaxBypassAttempts: 0 Result 11: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help. Test 12: UserEntersMissingInfo: True Enable: "Off" Username: "username on a device" Result 12: Fail: FileVault didn't turn off, but the profile in settings updated. The machine restart didn't help.

My company signed the application with enterprise certificate, the Provisioning Profile expired on March 20, 2025. Some iPhones didn't update the application before the expiration. We have update the Provisioning Profile and repackaged application. However, these iPhones still can't use the application after reinstalling the new ipa. After opening the application, the screen is blank and then flashes back without any error prompt. Restarting iPhone didn't help.

We are currently working on a SCEP server implementation that operates in FIPS-approved mode. In this mode, RSA PKCS#1 v1.5 encryption is disallowed due to compliance requirements, and only FIPS-approved padding schemes such as RSA-OAEP are permitted. However, we have observed that the SCEP client functionality on Apple devices currently does not support RSA-OAEP for CMS EnvelopedData decryption. This creates a challenge for us in ensuring FIPS compliance while maintaining compatibility with Apple devices during certificate enrollment through SCEP. We would appreciate your guidance on the following: Are there any alternative FIPS-approved encryption algorithms or configurations supported by Apple devices for SCEP CMS EnvelopedData decryption? Is there any plan or timeline for future support of RSA-OAEP on Apple platforms for this use case? Feedback raised along with sysdiagnose logs as well : FB17655410

Hi Apple Community, At WWDC25, introduced a native device migration feature with iOS/macOS 26 and Apple Business Manager that promises seamless migration from one MDM to another without wiping devices or manual re-enrollment. That said, while testing this in iOS/macOS 26 beta, we ran into an issue: the Wi-Fi settings deployed by the old MDM aren’t retained during the migration. This means devices lose Wi-Fi connectivity partway through, and users have to manually reconnect before the migration to the new MDM can continue. This interrupts what should be a smooth, hands-off process. We wanted to ask if this is a known issue or limitation with the current beta? Are there any recommended ways to avoid losing Wi-Fi profiles during this migration window? Will this improve in future updates so that the Wi-Fi connection is preserved or seamlessly handed off to the new MDM? Any tips, workarounds, or official guidance Apple can share on best practices for handling Wi-Fi profiles during ABM-native device migrations would be hugely appreciated. Added Feedback with FeedBackAssistant ID : FB20150763 Thanks in advance.

When clicking Upload for the CSR file, there is no APNS certificate available for download. Instead, the portal redirects to https://www.apple.com/filenotfound MDM Push Certificates are critical for the operation of managed devices, if they expire, all devices will have to be reenrolled creating a catastrophic event for all the customers devices. Please review and given how critical this service for renewing certificates is for your customers, please also make sure it is always available without downtimes. Let me know if you need more details, Thank you, Sergio

Hi. I am writing a little MDM application. Despite the basic task (add a password for 'remove profile' button in settings), it seems I am stuck with a problem: When I try to enroll my device with enrollment.mobileconfig file, Apple Configurator app, I receive an error The profile “Enrollment Profile” could not be installed because it is invalid. Make sure the profile is valid and try installing it again. The original architecture of my .mobileconfig contains of two payloads (com.apple.security.scep , com.apple.mdm), and it works correctly. However, when I try to add a third payload of com.apple.profileRemovalPassword , I receive the error stated above. From logs collected on iPhone, here's what was found : Failed to parse profile data. Error: NSError: Desc : The profile “Enrollment Profile” is invalid. Sugg : A profile containing an MDM payload must be removable. US Desc: The profile “Enrollment Profile” is invalid. US Sugg: A profile containing an MDM payload must be removable. Domain : MCProfileErrorDomain Code : 1000 Type : MCFatalError Params : ( "Enrollment Profile" ) ...Underlying error: NSError: Desc : A profile containing an MDM payload must be removable. US Desc: A profile containing an MDM payload must be removable. Domain : MCProfileErrorDomain Code : 1000 Type : MCFatalError Extra info: { isPrimary = 1; } My main dictionary contains HasRemovalPasscode Also, I have tried playing around with PayloadRemovalDisallowed setting it to true and false, however, I keep getting the same error message. There is also a second error produced: Profile MCConfigurationProfile, version 1: Display Name: “Enrollment Profile” Description : “***” Identifier : *** UUID : *** Organization: *** Is Stub : No Locked : Yes Removal passcode present Encrypted : No Trusted : 0 Signed : No Device Type : 0 Payloads: Payload MCSCEPPayload, version 1 Description : “***” Identifier : *** UUID : *** Type : com.apple.security.scep Display name: *** Organization: *** Payload MCMDMPayload, version 1 Description : “***” Identifier : *** UUID : *** Type : com.apple.mdm Organization: *** Payload MCRemovalPasswordPayload, version 1 Identifier : com.examp Can't parse profile: <decode: missing data> The code for com.apple.profileRemovalPassword is taken from apple documentation (https://developer.apple.com/documentation/devicemanagement/profileremovalpassword) I have also tried the automatic way - creating it from Apple Configurator, so it is correct in terms of syntax 100%. Several important notes: Creating a fresh new profile with just password removal protection single payload allows to perform a download of the profile If I comment out the whole com.apple.mdm payload block, I will be able to download this profile on iPhone also The com.apple.mdm block is also valid by itself, and works correctly I have tried implementing other types of "dummy" payloads - for example com.apple.dock <dict> <key>PayloadType</key> <string>com.apple.dock</string> <key>PayloadVersion</key> <integer>1</integer> <key>PayloadIdentifier</key> <string>com.example.test.dock</string> <key>PayloadUUID</key> <string>22222222-3333-4444-5555-666666666666</string> <key>PersistentApps</key> <array/> </dict> And everything worked out fine. So my hypothetical conclusion out of these four notes might be in some type of interconnection between mdm and profileRemovalPassword, which isn't really listed anywhere? Or am I missing something ? Thank you in advance.

My institution uses Blackboard and iPads to conduct assessments, and I’m trying to find some proctoring tools. Students conduct the assessments directly on Blackboard using either Safari or Chrome. I know that Apple has a function that does EXACTLY what I’m looking for, but from what I understand, this function has to be made available by Safari or Chrome: https://developer.apple.com/documentation/automaticassessmentconfiguration I don’t know whether either of these two browsers have this function enabled, and whether it can be switched on and off for custom-made Blackboard assessments. Is this a possibility? Are there other options? I know Blackboard offers built-in and third-party proctoring, but contacting them is difficult, and my company does not give me the appropriate authority to speak directly with Blackboard. So, I’m not able to find out about the feasibility, costs, etc. of this option. Any help would be greatly appreciated.

Hello, I have an Apple Developer Enterprise account, and Apple Support has already enabled MDM for my account. I successfully downloaded and installed my MDM Vendor Certificate (it shows up in Keychain as MDM Vendor: [My Company Name] with its private key). Here’s what I’ve done so far: Exported the Vendor Certificate + private key as a .p12, then converted to .pem and .key using OpenSSL. Generated an unsigned CSR with CN=com.apple.mgmt.External. using OpenSSL. Attempted to sign the CSR using: my Vendor certificate the Vendor private key Apple Worldwide Developer Relations (WWDR) intermediate certificate OpenSSL smime -sign command with DER output Problem: Every time I try to upload the vendor-signed CSR to the Apple Push Certificates Portal, I get an error (CSR rejected). Sometimes OpenSSL even fails with “unable to load certificates” depending on how the WWDR certificate is included. My Questions: What is the correct OpenSSL command and certificate chain Apple expects for signing the CSR? Do I need to include any additional intermediates besides WWDR? Is there an official Apple reference example for generating the vendor-signed CSR that the Push Certificates Portal will accept? Any guidance from the community (or someone who has successfully done this end-to-end) would be greatly appreciated. Thank you, Sergio Sanchez

Hello Apple Developer Community, I am implementing the "Return to Service" feature with app preservation in our MDM solution (iOS 26+). My goal is to use the EraseDeviceCommand to securely erase user data while preserving managed apps, and then have the device automatically re-enroll without user interaction. What I am doing: The device is supervised and successfully enrolled in Automated Device Enrollment (ADE). The device has generated and escrowed a bootstrap token to our MDM server (SetBootstrapToken received). I am sending the EraseDeviceCommand to the device via MDM with the necessary parameters for Return to Service with app preservation. The command payload includes: Enabled: true The previously escrowed BootstrapToken (as Base64 data). WiFiProfileData (as Base64 data) to ensure connectivity post-erase. Example Payload Structure (Simplified): <key>ReturnToService</key> <dict> <key>Enabled</key> <true/> <key>BootstrapToken</key> <data>YOUR_BASE64_TOKEN</data> <key>WiFiProfileData</key> <data>YOUR_BASE64_WIFI_PROFILE</data> </dict> The observed behavior: The erase command is successful. The device performs the secure user data erase. Crucially, the managed applications are preserved and automatically installed again after the reboot (confirming app preservation is working). The device connects to the Wi-Fi network successfully. The issue: I am not seeing the GetBootstrapToken request from the device hit our MDM server's check-in URL during the post-erase setup assistant phase. The re-enrollment seems to complete, but this specific request is missing from our server logs. My questions: Is the GetBootstrapToken request an explicit check-in message type, or is it an implicit part of the general CheckIn process during ADE re-enrollment when the token is used? If the device successfully re-enrolls and preserves apps, is the explicit GetBootstrapToken request still expected? Or does the token included in the EraseDeviceCommand payload satisfy all authentication needs for this workflow? What specific conditions or capabilities on the MDM server side might prevent the device from sending this specific request, even if the overall process succeeds? Any insights from Apple engineers or other developers who have successfully implemented this flow would be greatly appreciated. Thank you!

Is there a way to restrict an end user from potentially editing a supervised device through Apple Configurator? It seems that Apple Configurator allows to make undesirable changes to a supervised device, like removing profiles, which would in turn be detrimental to the intended experience on the device, if a user would actually be able to perform such changes.

Hello, We have an internal enterprise app. After the provisioning profile (certificate) expired, some employees' iPhones still retained the old certificate when updating the app, causing the app to fail to open. We’ve tried restarting and reinstalling the app, but the issue persists. Having each employee manually reset network or device settings would be too operationally costly. Since this involves a large number of devices, we cannot use Apple Configurator to remove and reinstall certificates one by one. Therefore, we’d like to ask if there is a more efficient, batch-oriented solution to quickly resolve the certificate residue issue. We’d appreciate any suggestions for large-scale deployment methods. Thank you very much!

Hello, this may not be the correct place to ask this question so I apologize in advance if this is the case. We are currently having some issues when attempting to restore device back ups via iCloud that where previously enrolled to our MDM solution, as upon the restore no app data seems to be persisted over (we have tested restoring the backup on the same device and we have been able to have data persist between wipes) On the initial device we have ensured that the restrictions allowCloudKeychainSync allowManagedAppsCloudSync are set to true, and can see that the initial devices back up has the app data backed up, yet despite this data is not persisted when restoring from back up on a new device. On the device where the back up was initially done when restoring the applications are applied but indicated that they must be re-installed via our management console, once the app has been uninstalled and reinstalled the old data does show up, when applied to the new device our mdm solution pushes down the app.managed config but the device treats it as a new install. Could this possibly be due to us using Device Licensing when assigning apps? Or is it due to the intial device only performing a token update request when restoring and the new device going through the entire checkin proccess? Both devices are provisioned via DEP, and applications where assigned initially via VPP Any insight on this would be useful (For reference this is an MDM solution of our own making so we are attempting to sus out if there is a configuration issue we could be overlooking).

I'm looking at the Apple official document below and getting the app's information. https://developer.apple.com/documentation/devicemanagement/getting-app-and-book-information-legacy However, I couldn't get the custom app's information for a few days ago. The result item is empty. This is a URL that is normally viewed. https://uclient-api.itunes.apple.com/WebObjects/MZStorePlatform.woa/wa/lookup?version=2&p=mdm-lockup&caller=MDM&platform=volumestore&cc=jp&id=1202716089 This is the URL that gives an empty response to the result. https://uclient-api.itunes.apple.com/WebObjects/MZStorePlatform.woa/wa/lookup?version=2&p=mdm-lockup&caller=MDM&platform=volumestore&cc=jp&id=1556411142 In ABM/ASM, the number of applications used and the number of available applications are all viewed normally. Is there anything else I can check? Please reply. Thank you.

Summary: When applying a configuration profile that uses allowListedAppBundleIDs to permit a defined set of apps, essential Apple Watch apps are unexpectedly removed from the paired Watch — even though their associated iPhone bundle IDs are explicitly included. This issue occurs with a minimal profile, and has been consistently reproducible on the latest versions of iOS and watchOS. Impact: This behavior severely limits the use of Apple Watch in managed environments (e.g., education, family management, accessibility contexts), where allowlisting is a key control mechanism. It also suggests either: Undocumented internal dependencies between iOS and watchOS apps, or A possible regression in how allowlists interact with Watch integration. Steps to Reproduce: Create a configuration profile with a Restrictions payload containing only the allowListedAppBundleIDs key. Allow a broad list of essential system apps, including all known Apple Watch-related bundle IDs: com.apple.NanoAlarm com.apple.NanoNowPlaying com.apple.NanoOxygenSaturation com.apple.NanoRegistry com.apple.NanoRemote com.apple.NanoSleep com.apple.NanoStopwatch com.apple.NanoWorldClock (All the bundles can be seen in the Attached profile) Install the profile on a supervised or non-supervised iPhone paired with an Apple Watch. Restart both devices. Observe that several core Watch apps (e.g. Heart Rate, Activity, Workout) are missing from the Watch. Expected Behavior: All apps explicitly included in the allowlist should function normally. System apps — especially those tied to hardware like Apple Watch — should remain accessible unless explicitly excluded. Actual Behavior: Multiple Apple Watch system apps are removed or hidden, despite their iPhone bundle IDs being listed in the allowlist. Test Environment: iPhone running iOS 18 Apple Watch running watchOS 11 Profile includes only the allowListedAppBundleIDs key Issue confirmed on fresh devices with no third-party apps Request for Apple Engineering: Please confirm whether additional internal or undocumented bundle IDs are required to preserve Apple Watch functionality when allowlisting apps. If this behavior is unintended, please treat this as a regression or bug affecting key system components. If intentional, please provide formal documentation listing all required bundle IDs for preserving Watch support with allowlisting enabled. Attachment: .mobileconfig profile demonstrating the issue (clean, minimal, reproducible) Attached test profile = https://drive.google.com/file/d/12YknGWuo1bDG-bmzPi0T41H6uHrhDmdR/view?usp=sharing

Hello world! First post here. Developing my first app. It primarily targets supervised and MDM managed devices. A few questions: For supervised devices, is serial number available? I want to get the number and use it for app auto activation Is MDM required for supervised devices? Or, as long as a device is enrolled through Apple Business Manager? Which capacity shall I request for the app? Thanks so much!

When using the SoftwareUpdateEnforcementSpecific to target an update to iPad OS 18.7.1, will the update be triggered to be downloaded immediately after the iPad has an active Internet connectivity? Or, if the SoftwareUpdateSettingsAutomaticActionsObject download string is set to AlwaysOff, will this mean that the update enforced will not start downloading automatically, but only when the user decides? I am trying to understand how these two can be combined together or if they work independently, as while trying to enforce a specific version, we need to eliminate the possibility to download an iPad OS version using cellular data, as our devices have an eSIM installed and the cost of using that for the iOS updates will be quite high. Maybe there is a setting to only allow the iOS updates to be downloaded via Wi-Fi. Thanks!

Hi, I found In-App purchase feature is restricted even with User-based VPP. I understand Device-based VPP does not accept In-App purchase, however User-based VPP accept In-App purchase. (It works on iOS 15 device actually.) When I tried subscribe ChatGPT on iOS 26 device using User-based VPP, an error dialog is shown that explains In-App purchase is not allowed. sysdiagnose shows logs belog: 情報 2025-10-26 23:58:22.350841 -0700 storekitd [Client] (ChatGPT) Initializing client デフォルト 2025-10-26 23:58:22.353982 -0700 storekitd [Client] (ChatGPT) Initialized with server Production bundle ID com.openai.chat and request bundle ID com.openai.chat] デフォルト 2025-10-26 23:58:22.354020 -0700 storekitd [CanMakePayments] In-app purchase disabled because app com.openai.chat has MID based SINF In iOS 15 device, no storekitd logs are found and appstored and several processes seem to handle In-App purchase. Does In-App purchase no longer work with User-based VPP? Thank you.

The question: Is there any chance that Apple will integrate Intune SDK into Apple apps such as Mail or Calendar, or create Siri-compatible Intune SDK-integrated versions of Mail and Calendar? The reason for the question: My team has been asked by VIPs in our company (e.g. execs and board members) if Siri can be used with Outlook, and the only way is through Shortcuts or by adding the Outlook account to Mail. Both of these options would violate our security policies for these reasons: Since our company policy and federal regulations don't permit us to allow access to company resources on non-MAM-protected apps, we can't allow our users to login to the Mail app and make full use of Siri, due to the lack of MAM controls for Mail and Calendar. We only allow users to transfer data between policy-managed apps which have integrated the Intune SDK allowing us to enforce DLP and other security measures. The only way to enable Shortcuts would be to disable these security measures.

Hello, this may not be the correct place to ask this question so I apologize in advance if this is the case. I am currently running into two specifc issues while continuing to implement the app.managed configuration which are quite frustrating and I will detail them below Unlike MDM where an application could be "reinstalled", by sending an install application command down for the same app DM does not have a similar mechanism which causes some issues as (while inconsistent) devices do not always respect the configuration sent down, and will not begin downloading VPP applications. They can be seen in the configuration when checking under VPN & Device Management but they do not return on a status report, alternatively and app will "install" but will have a cloud symbol next to it requiring a download (which I believe would be impossible on supervised devices without apple accounts/have restricted apple accounts associated to them). These apps are also reported incorrectly, as they return a managed response while being inaccessible. Both of these issues are solved by removing and reinstall applications (occasionally). Is there any easier way to trigger a re-install or is this the only way to trigger this? The Version element that can be optionally sent down does not seem to work (or if it does, does so inconsistently). A device will very happily download the application initially with the version element present, though when we detect an updated external ID from the VPP program and send down an updated configuration devices behave unexpectedly. Some have ignored it, some have responded back that a download has begun (with no download taking place and the application clearly still being the initial installed version as can be see in the apps page) or it just works, but there is not consistency. I realize a new UpdateBehavior object has been added to possibly handle this, but it is only supported in iOS 26 and above and there are plenty of people who do not have phones that can upgrade that far. Are there alternative ways to enforce an application update other than uninstalling and reinstalling the application without the version (or will sending down a config without a version after one was originally pinned force it to update to latest?) Kind Regards

In iOS 26.1 beta 4, under MDM restrictions that disable the camera via a configuration profile, the Camera and FaceTime apps are hidden as expected. However, other third-party apps can still access and use the camera function normally. This is unreasonable.