I'm currently implementing a managed app using the new AppConfig specification. I referred to Apple's official documentation: Specifying and decoding a configuration. Based on the example provided in the "Publish your configuration specification" section, I structured my application configuration plist like this: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>configuration</key> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </dict> </plist> When I deployed this configuration via my MDM server, the server reported valid for the activation, configuration and asset (which is the plist), but the configuration did not reflect or apply within my app. My app was unable to retrieve these settings. After some troubleshooting, I found that removing the top-level <key>configuration</key> wrapper resolved the issue. The following plist structure successfully pushed the configuration to my app: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </plist> My question is: Is the inclusion of the <key>configuration</key> wrapper (as shown in the Apple documentation example) incorrect for the current AppConfig implementation? Or is this structure intended for a future release (e.g., iOS 26 or beyond) and the documentation implicitly refers to it, causing confusion for current implementation? Any clarification would be greatly appreciated! Thank you!

I’m looking for advice on implementing an Active Supervision Mode for enhanced parental control. My goal is to restrict access to both iOS system apps and third-party applications to create a safer and more tailored digital experience for my child. Here’s what I’d like to achieve: App Restrictions: Block specific apps (both iOS and third-party) and allow access only to approved ones. Time Limits: Set daily usage limits for individual apps or app categories. Content Filtering: Apply restrictions to block inappropriate content and age-inappropriate apps. Remote Management: Manage these settings remotely from my device for added convenience. Activity Monitoring: View app usage stats or receive alerts for policy violations. I understand that Screen Time on iOS offers basic parental controls, but I’m exploring whether iOS supports more advanced capabilities natively or through additional configurations. I’ve also heard that enrolling a device in Apple Business Manager (ABM) and linking it to an MDM (Mobile Device Management) solution might provide greater control. If this is a viable solution, could anyone provide guidance on: Enrolling a personal or family-owned device into Apple Business Manager. Linking an MDM for configuring app restrictions and monitoring usage. Alternatively, if there are third-party parental control apps that work seamlessly with iOS to achieve these goals, I’d appreciate your recommendations! Thanks in advance for your insights!

I'm looking at the Apple official document below and getting the app's information. https://developer.apple.com/documentation/devicemanagement/getting-app-and-book-information-legacy However, I couldn't get the custom app's information for a few days ago. The result item is empty. This is a URL that is normally viewed. https://uclient-api.itunes.apple.com/WebObjects/MZStorePlatform.woa/wa/lookup?version=2&p=mdm-lockup&caller=MDM&platform=volumestore&cc=jp&id=1202716089 This is the URL that gives an empty response to the result. https://uclient-api.itunes.apple.com/WebObjects/MZStorePlatform.woa/wa/lookup?version=2&p=mdm-lockup&caller=MDM&platform=volumestore&cc=jp&id=1556411142 In ABM/ASM, the number of applications used and the number of available applications are all viewed normally. Is there anything else I can check? Please reply. Thank you.

When clicking Upload for the CSR file, there is no APNS certificate available for download. Instead, the portal redirects to https://www.apple.com/filenotfound MDM Push Certificates are critical for the operation of managed devices, if they expire, all devices will have to be reenrolled creating a catastrophic event for all the customers devices. Please review and given how critical this service for renewing certificates is for your customers, please also make sure it is always available without downtimes. Let me know if you need more details, Thank you, Sergio

this issue is posted on Community multiple times. I am here out of desperation after opening a case on IT support. when a user fills out their application, uploads resume - all of that info is saved. however, when you click "submit," the button does not work. I (along w/tons of other ppl) have tried all the usual remedies: clear cache, try different browsers, try different networks, try different devices - NOTHING WORKS. this is maddening b/c it is affecting my life and career. this is an urgent need. it is also disappointing that there is no tech support for the Careers site! this was confirmed by IT support today, they could not find anything and sent me here instead. please help! I was an apple contractor last year and want to come back but can't even submit my application.

Hello all, I’m hoping someone here has gone through the process of integrating an ERP system with the Apple GSX API and can offer some guidance. We’re currently working with an AASP who asked us to integrate our ERP with the Apple GSX API. It’s the first time for both of us, and we’re a bit stuck on how to properly get started. The AASP contacted their regional manager, who confirmed that an NDA and an Apple Developer Account would be necessary. However, he hasn’t handled this type of integration before and is still seeking internal guidance. That was a few months ago, and due to his workload, the AASP hasn’t heard back from him yet. Meanwhile, we’ve already enrolled in the Apple Developer Program and opened a support case, but we’ve been redirected to the forums since our case goes beyond standard support. So now we’re trying to understand: What steps need to be completed by the AASP? What are the steps we, as the ERP provider, need to take in order to receive API access? Are there any specific documents, applications, or technical requirements we should prepare in advance? We’d really appreciate any guidance or insight from others who have gone through this process — or even partial answers to help us move forward. Thanks in advance for your time!

Hello All, I am currently developing a mobile management system using declarative management and for the most part it is pretty great. There is one consistent issue I have run into and it comes when testing VPP app installs with not enough licenses. When my server detects that it can't provide a license ID it will return a 404, which causes the rest of the DM syncing to stop, and the activation to throw an error. Per the documentation for using simple activation: An array of strings that specify the identifiers of configurations to install. A failure to install one of the configurations doesn’t prevent other configurations from installing The above would imply that if a config fails it should not affect anything else (aside from possibly reporting an error. Am I returning the wrong error code for it to continue or is the behavior correct and the documentation is wrong? Any additional info would be useful

Hi, I’m an enterprise developer, and we distribute our internal iOS app through a direct download link on our company website (not via App Store or TestFlight). The app is properly signed and works fine on most devices including iPhones and regular iPads. However, on iPad Pro 11-inch (4th generation), the app crashes immediately upon launch when installed via the website. Interestingly, if we install the exact same app via Xcode, it runs without issue on the same device. We also tested a third-party enterprise app called "Taipei On", and it showed the same crash behavior when installed via direct web download on the same iPad model. This leads us to believe the issue may be more widespread or specific to this iPad Pro model or recent iOS versions. Furthermore, some of our users with iPhone 15 devices have started experiencing similar crashes recently, even though they had no issues before. Is this a known issue related to enterprise app distribution or IPA installation behavior on certain devices? Any advice or insight from the Apple team or other developers would be appreciated. Thanks!

I have an MDM supervised device with an installed managed app, that activates a content-filter solution to filter traffic system-wide. Is it possible in any way for the user to install a third party content-filter app that would somehow overtake the control of content filtering from my app? I'm asking this because I've tested such a case with my another test content-filter solution and it takes control over content filtering from my content-filter – I think this is possible only because my device is in developer mode, but I'm not entirely sure, and I need a confirmation that it would not be possible to happen in an end used environment.

Hello, wehave some Iphone in the family and noticed a strange issue: On a website the site admins renewed the webserver cert, and now most of the IOS devices( Iphone 15 / 15 Pro Max / Ipad 10) doesnot trust in the new cert, while the apple trustsin the rootCA webste: https://etitan.hu RootCA CN = NetLock Arany (Class Gold) Főtanúsítvány ios 18 trusted CAs:https://support.apple.com/en-us/121672 So any idea whats wrong ? On windows everything is OK !

I want to side load a .ipa file from a Mac to iPhone connected to Mac via USB. I don't want to use ABM or enterprise account. Also these can be any number of unknown devices. Is there any way to set this up automatically?

"To receive payments from Apple, you must add a bank account." As an Apple "Individual" developer, can I accept payments to my corporate card?

Is there any mechanism to restrict camera usage on a user-owned device, once they have opted in, consented to the restriction, and installed a management profile? Documentation suggests it was possible with allowCamera, but has be deprecated on unsupervised devices. Am I understanding correctly that it's simply not possible anymore unless the device is supervised?

I'm working on the companion iOS app for my purpose-built MDM system. when I use the following in a .swift file: import DeviceManagement I get the build issue: No such module 'DeviceManagement' When I attempt to add the framework in the Frameworks, Libraries, and Embedded Content settings, DeviceManagement doesn't even show up in the available frameworks. Alll the documentation I can find suggests that is the correct framework to import, but I'm new to this and not sure if I'm just missing something. Some AI help is suggesting that the culprit might be v16.x of Xcode, but I don't know enough to prove that correct or not. Any ideas on why Xcode believes there is no such module? Is there documentation that might help me learn how to make that framework available for my project?

I work at a school in NYC and have a software idea that could better support the new NYC phone ban law than current market options (i.e. Yondr pouches). Right now at my school, students and staff scan a QR code upon entering the building to indicate that they are in the building. They scan again on the way out to indicate they've left the building. This is super helpful for attendance, particularly in emergency situations (fire drills, etc). Imagine if when students scanned their QR code, it also activated an app similar to Opal or ScreenZen, but with an admin preset whitelisted apps. The idea is that this app would default deny access to all apps on students' phones except the admin preset whitelisted ones such as Phone, Calculator, etc. Depending on the age/needs of the student, other apps like Spotify, or medical apps could also be whitelisted. My question is -- is this idea possible to create? We would need admin preset controls to create the preset whitelist. We can't have students picking their own restrictions, as we know most would opt to not restrict at all. We would need an admin dashboard so teachers/admin can see which students have activated the app in the building, and which may be trying to sneakily avoid it. We would ideally need to be able to whitelist both system apps like Phone and Calculator, as well as non-system apps such as Spotify (and medical apps -- we have some students who manage/monitor their Diabetes with an app). I don't have a background in software. I'm a math and health teacher. I've experimented with trying to have friends who majored in CS to create this app for me, but they've all either struggled/lost interest. So I'm also looking for a business partner in this venture. If anyone has any guidance here, it would be so helpful! My boss (Head of School) is super interested in this idea and significantly prefers it to every other alternative that he has encountered. The problem is this idea does not exist yet! Note: I know this is a super similar idea to the app and product "Brick". Notably, though, Brick does not have the ability for admin preset controls, or the admin dashboard. We reached out to the company to see if they're create this for us and they said it's a back burner idea that they're aware of, but it's not a priority for them right now. Thank you for any guidance!

I created a provisional profile from apple developer portal for my iOS app. The expiry date shown in the profile is 21-April 2026. However, when I build the app with this provisional profile the expiry date shown in the app is 11 Dec, 2025. My iOS distribution certificate expires only in November 2026. I see a embeded.mobileprovision profile inside the app, and it has an expiry of 11-Dec-2025. I did a clean build,, cleared unnecessary profiles from profile folder, created a new provisional profile and tried, but nothing seems help. We have a few apps, and no other app has this issue. We do annual release of all apps together for provisional profile renewal. As this app expiry is different, it will cause lot of difficulty for us next year. Will you please help me to resolve this issue? Thanks.

Hi guys, I need to configure a VPN to work only for specific apps. I already have a supervised iPhone, and I’ve successfully configured the VPN, but right now it applies to the whole phone. I need it to work just for some apps. I tried using both Apple Configurator and iMazing, but I can’t find this option there.

We are going to replace our iPhone SE to iPhone 16e. The issue is that we are unable to install an in-house app on the new iPhone 16e. The app works on the iPhone SE Both phones run on the same iOS version (18.5) Has anyone else experienced the same issue? I initially thought the iPhone 16e was the successor to the iPhone SE

Issue - Safari application not fetched from system_profile command Use case - We are trying to get list of installed applications in the mac. For this we use System_profiler command to fetch the details list. It is working good, but the thing is , It doesnt fetch Safari app as an installed Application. Command used - **/usr/sbin/system_profiler SPApplicationsDataType** Can anyone suggest any other way to fetch the installed applications list from the mac , which includes all the apps (including safari app) and remains effective ?

can you make a profit with the seed program