When I try to sign in Managed Apple ID in supervised device there appears a prompt stating that "Apple ID" is a work account.This account must be signed in as a work account on this device.When I click continue it takes to VPN and device management tab where MDM profile already exists. Note:The managed Apple ID has a ICloud subscription for it. When I remove the subscription for the Apple ID and try to sign in, it works. Kindly help on this or advise on any additional steps required to enable sign in for managed Apple ID in this scenario

Hello, this may not be the correct place to ask this question so I apologize in advance if this is the case. We are currently having some issues when attempting to restore device back ups via iCloud that where previously enrolled to our MDM solution, as upon the restore no app data seems to be persisted over (we have tested restoring the backup on the same device and we have been able to have data persist between wipes) On the initial device we have ensured that the restrictions allowCloudKeychainSync allowManagedAppsCloudSync are set to true, and can see that the initial devices back up has the app data backed up, yet despite this data is not persisted when restoring from back up on a new device. On the device where the back up was initially done when restoring the applications are applied but indicated that they must be re-installed via our management console, once the app has been uninstalled and reinstalled the old data does show up, when applied to the new device our mdm solution pushes down the app.managed config but the device treats it as a new install. Could this possibly be due to us using Device Licensing when assigning apps? Or is it due to the intial device only performing a token update request when restoring and the new device going through the entire checkin proccess? Both devices are provisioned via DEP, and applications where assigned initially via VPP Any insight on this would be useful (For reference this is an MDM solution of our own making so we are attempting to sus out if there is a configuration issue we could be overlooking).

When an iOS 26.0 device is prepared in supervised mode, wifi connection screen is showing when the device is restarted. This wifi connect appears always on restart. I have tried using Apple Configurator GUI and Command line (cfgutil) command. In both cases, The behavior Wifi screen is showing up on restart for supervised mode. Cfgutil command: cfgutil -C {Certificate} -K {Key} prepare --supervised --name {NAME} --host-cert {Certificate} --skip-all Note: In non-supervised mode and other iOS, the wifi screen is not showing. Apple Configurator version: 2.18 iOS version: 26.0 Device model: iPhone 11 and above. Anyone else facing this issue? Any help is super appreciated.

Hello world! First post here. Developing my first app. It primarily targets supervised and MDM managed devices. A few questions: For supervised devices, is serial number available? I want to get the number and use it for app auto activation Is MDM required for supervised devices? Or, as long as a device is enrolled through Apple Business Manager? Which capacity shall I request for the app? Thanks so much!

Hello ! Currently, we have customers who use about 5,000 devices. In the case of ios26, the phone number is not acquired overall, and 18.x, 17.x, and 16.x are all acquired in half and not acquired in half. https://developer.apple.com/documentation/devicemanagement/deviceinformationcommand/command-data.dictionary/queries-data.dictionary It seems that it is the right behavior not to acquire it on the specification sheet. However, I wonder when it became impossible to acquire. (There are devices that can be acquired and devices that can't be acquired in the same os version.) Will the devices that are being acquired be blocked someday? When it was developed in 2019, it was in a state that could be acquired in full. I would also like to ask if there is an alternative way to get your phone number. Thank you.

Details: Device: iPhone 12 Pro Max System: iOS 26.1 beta 2 Issue Description: When testing MDM device restriction capabilities on iOS 26.1 beta 2, I found that the allowCamera restriction does not work as expected. Observed Behavior: • On a BYOD device: When allowCamera is set to false, the Camera and FaceTime apps disappear from the Home Screen, as expected. However, third-party apps (such as WeChat) can still access the camera and take photos. • On earlier versions (e.g. iOS 26.0.1): Setting allowCamera to false correctly blocks all apps, including third-party apps, from accessing the camera. Initially, I assumed Apple might have changed this restriction behavior so that allowCamera only applies to supervised devices. However, after testing on supervised devices, I found that even there, when allowCamera is set to false, the Camera and FaceTime apps are hidden, but third-party apps can still use the camera. This indicates that the restriction is not functioning correctly in iOS 26.1 beta 2. Expectation: When allowCamera is set to false, all camera access — including third-party apps — should be blocked. Request: Could someone from Apple’s development or MDM team confirm whether this is an expected behavior change or a potential bug in iOS 26.1 beta 2?

In iOS 26.1 beta 4, under MDM restrictions that disable the camera via a configuration profile, the Camera and FaceTime apps are hidden as expected. However, other third-party apps can still access and use the camera function normally. This is unreasonable.

Hi, I found In-App purchase feature is restricted even with User-based VPP. I understand Device-based VPP does not accept In-App purchase, however User-based VPP accept In-App purchase. (It works on iOS 15 device actually.) When I tried subscribe ChatGPT on iOS 26 device using User-based VPP, an error dialog is shown that explains In-App purchase is not allowed. sysdiagnose shows logs belog: 情報 2025-10-26 23:58:22.350841 -0700 storekitd [Client] (ChatGPT) Initializing client デフォルト 2025-10-26 23:58:22.353982 -0700 storekitd [Client] (ChatGPT) Initialized with server Production bundle ID com.openai.chat and request bundle ID com.openai.chat] デフォルト 2025-10-26 23:58:22.354020 -0700 storekitd [CanMakePayments] In-app purchase disabled because app com.openai.chat has MID based SINF In iOS 15 device, no storekitd logs are found and appstored and several processes seem to handle In-App purchase. Does In-App purchase no longer work with User-based VPP? Thank you.

Hello Apple Developer Community, I am implementing the "Return to Service" feature with app preservation in our MDM solution (iOS 26+). My goal is to use the EraseDeviceCommand to securely erase user data while preserving managed apps, and then have the device automatically re-enroll without user interaction. What I am doing: The device is supervised and successfully enrolled in Automated Device Enrollment (ADE). The device has generated and escrowed a bootstrap token to our MDM server (SetBootstrapToken received). I am sending the EraseDeviceCommand to the device via MDM with the necessary parameters for Return to Service with app preservation. The command payload includes: Enabled: true The previously escrowed BootstrapToken (as Base64 data). WiFiProfileData (as Base64 data) to ensure connectivity post-erase. Example Payload Structure (Simplified): <key>ReturnToService</key> <dict> <key>Enabled</key> <true/> <key>BootstrapToken</key> <data>YOUR_BASE64_TOKEN</data> <key>WiFiProfileData</key> <data>YOUR_BASE64_WIFI_PROFILE</data> </dict> The observed behavior: The erase command is successful. The device performs the secure user data erase. Crucially, the managed applications are preserved and automatically installed again after the reboot (confirming app preservation is working). The device connects to the Wi-Fi network successfully. The issue: I am not seeing the GetBootstrapToken request from the device hit our MDM server's check-in URL during the post-erase setup assistant phase. The re-enrollment seems to complete, but this specific request is missing from our server logs. My questions: Is the GetBootstrapToken request an explicit check-in message type, or is it an implicit part of the general CheckIn process during ADE re-enrollment when the token is used? If the device successfully re-enrolls and preserves apps, is the explicit GetBootstrapToken request still expected? Or does the token included in the EraseDeviceCommand payload satisfy all authentication needs for this workflow? What specific conditions or capabilities on the MDM server side might prevent the device from sending this specific request, even if the overall process succeeds? Any insights from Apple engineers or other developers who have successfully implemented this flow would be greatly appreciated. Thank you!

I recently reviewed the device management restrictions page of the developer docs (https://developer.apple.com/documentation/devicemanagement/restrictions) and noticed that several items are now marked "In a future release, this restriction will begin requiring supervision." Some of these changes are likely to have a dramatic impact on our app and business! So my question is threefold: a) where can I find out or request more information about the planned changes (e.g. timeline would be especially helpful)? b) why are these changes being implemented at all? c) to whom / where can I protest these changes (aside from this forum and feedback assistant)?

For additional security we would like to avoid keeping generated certificates (their private keys) on our server after installing them on a device, but still be able to reference them in later installed configuration profiles via MDM. However, it seems that for a configuration profile's payload to use a certificate (e.g. VPN payload), the certificate payload must be present in the same profile. Are we missing anything, perhaps it's already possible somehow? Ideal workflow for us would be: our MDM server generates a certificate (private+public keys) for a given device our MDM server sends this certificate to the device as configuration profile and saves PayloadUUID of the certificate's payload our MDM server deletes the generated private key from its storage. At this point the private key is present only on the device. at some point in the future our MDM server sends a configuration profile that references the certificate from step 2 via the saved PayloadUUID (e.g. using key PayloadCertificateUUID in a VPN payload) Current result: device responds to MDM server with error "The profile “VPN” could not be installed. Certificates needed for the VPN service “VPN” are invalid." Desired result: device is able to find the previously installed certificate via its PayloadUUID. Alternatively, it could be certificate fingerprint or something similar. One more alternative could be to replace steps 1-3 by an app on the device that obtains a certificate (in any way), installs it to device as a configuration profile, passes the certificate's PayloadUUID to our MDM server and then doing step 4.

Hi everyone, I submitted this feature request through Apple’s Feedback Assistant and wanted to share it here, because many families run into the same issue and Apple prioritizes features based on the number of reports they receive. Current limitation: Screen Time only allows one single Downtime period per day for child accounts. For families with separate school hours and bedtime, this is very impractical. My real-world use case: • Downtime 1: 08:00–13:00 (school) • Downtime 2: 20:00–06:00 (bedtime) Both serve completely different purposes, but are not possible to combine with the current system. My suggestions to Apple: Support multiple Downtime periods per day for child accounts. Allow custom exceptions per Downtime block (e.g., allow Phone app). Provide more flexibility overall for families using Screen Time. If you would benefit from this too, it would be great if you could submit the same request via the Feedback app – the more reports Apple receives, the higher the chance for implementation. My Feedback ID: FB21265678 Thank you! 🙏 Hallo zusammen, ich habe über die Feedback-App einen Vorschlag an Apple eingereicht und wollte ihn hier teilen, weil viele Familien dasselbe Problem haben und Apple mehr Rückmeldungen braucht, um das Thema zu priorisieren. Aktuelles Problem: In Bildschirmzeit kann für Kinder aktuell nur eine einzige Auszeit pro Tag eingerichtet werden. Für Familien mit getrennten Schul- und Schlafenszeiten ist das extrem unpraktisch. Mein Anwendungsfall: • Auszeit 1: 08:00–13:00 (Schule) • Auszeit 2: 20:00–06:00 (Schlafenszeit) Beides erfüllt unterschiedliche Zwecke, ist aber nicht kombinierbar. Mein Vorschlag an Apple: Mehrere Auszeiten pro Tag für Kinderaccounts. Pro Auszeit eigene Ausnahmen festlegen (z. B. Telefon erlauben). Allgemein mehr Flexibilität im Screen-Time-System für Familien. Wenn ihr das ebenfalls hilfreich findet, wäre es super, wenn ihr es auch über die Feedback-App meldet – je mehr, desto besser. Feedback-ID meines Vorschlags: FB21265678 Danke euch! 🙏

Hi, everyone! Is there any way to change ACL of existing Private key in system keychain using MDM? We would like to add the binary or .app to access list of the key. I tried to send script via MDM which imported/exported our certificate with private key with required ACL. But can we change it without import/export?

Hello, I’ve run into an issue with a configuration profile on my supervised iPhone. I’m wondering if anyone here might be able to help? The profile contains the allowListedAppBundleIDs key within the restrictions payload. My Apple Watch is paired with the iPhone. The iPhone was supervised manually with Apple Configurator, hence the Apple Watch has not been directly supervised itself. The profile works completely as expected when installed on the phone. As soon as the profile is installed on the iPhone, I can witness the apps on the Apple Watch rearrange themselves as some apps are hidden. So clearly the profile is applying its restrictions to the Apple Watch to some degree. My issue however is that apps listed in the whitelist are hidden from the Watch. The apps that are missing from my Watch are Walkie Talkie, Find My Items, Find My Friends, Messages, Alarm, Remote, Now Playing, Sleep, Meditation and Heart Rate. This is despite the following bundle IDs being listed in the whitelist array: com.apple.findmy.findpeople, com.apple.findmy.finddevices, com.apple.HeartRate, com.apple.SessionTrackerApp, com.apple.NanoWorldClock, com.apple.findmy.finditems, com.apple.Mind, com.apple.NanoOxygenSaturation, com.apple.watchmemojieditor com.apple.NanoSleep com.apple.NanoNowPlaying com.apple.noise com.apple.tincan com.apple.NanoRemote com.apple.NanoAlarm com.apple.private.NanoTimer com.apple.NanoStopwatch I’ve done some testing, but not sure what I’ve found really. I’ve so far identified 3 scenarios. Scenario 1: I have the whitelist profile installed on the iPhone. I download an app that appears in the whitelist from my watch (or at least its iPhone version does). The apps show up on the iPhone automatically and can be launched there. These apps cannot be launched on the watch. Scenario 2: I downloaded a few apps to my watch, that didn’t automatically install on my iPhone at the same time. They were on the whitelist. These ones couldn’t be launched from my Watch. I then downloaded them to the iPhone and they could be launched there (since they were on the whitelist). Scenario 3: A couple of 3rd party apps on the whitelist could be downloaded and launched from the watch with the whitelist installed. It seems as though there are different kinds of Apple Watch app and this is what I’ve read elsewhere. First of all there are Watch-only apps, which do not automatically install a companion iPhone app. Secondly there are companion apps, which when installed from the Watch App Store download their companion app to the iPhone in the background. Someone please correct me - I’m bound to be overlooking something here. So maybe the apps that when installed from Watch automatically install on iPhone and can only be launched from the iPhone have a separate bundle ID for their Watch app which I haven’t included? Apps that are on the whitelist AND do not automatically install an iPhone app AND can be launched from the Watch, include: solstice What3words So maybe these do not need a companion app, but have the same Bundle ID as their iPhone app? However, I’m still not sure why many stock Apple Watch apps are missing from the Watch…. The most obvious answer is that I’ve got their Bundle IDs wrong, but I don’t think I have given I extracted the bundle IDs from the App Store pages of the Apple WatchOS apps. I noticed at this Apple Support page (https://support.apple.com/en-gb/guide/deployment/dep34c5cd30f/1/web/1.0) that there is no mention of whitelisting or blacklisting apps on WatchOS using MDM, yet something definitely happens on the watch when the configuration profile is installed on the iPhone. Furthermore, if I tap on a configuration profile, which comprises a blacklist, on my iPhone it will ask me if I want to install it on the iPhone or Watch. The same pop-up question doesn’t happen when the profile contains a whitelist. All this to say, I’m massively confused as to why I can’t get this working. I’d really appreciate anyone’s advice which is bound to be expert. Thank you

We are attempting to block the attachment of photos from the Photos/Gallery app when sending emails or sharing on social media applications such as Gmail, Outlook, and other platforms. These are MDM Managed Applications While file attachments (e.g., PDFs, documents) are successfully blocked, photo attachments are not being restricted, allowing users to attach photos without limitations. We are applying the below restriction to the device through an MDM allowOpenFromUnmanagedToManaged: false https://developer.apple.com/documentation/devicemanagement/restrictions Steps to Reproduce: Open the Photos or Gallery app on a mobile device. Open Gmail, Outlook, or a social media application (e.g., Facebook, Instagram). Open the Photos or Gallery app on a mobile device. Select a photo to attach. Try to attach the selected photo to an email or post. Observe that the photo is successfully attached, despite restrictions on file attachments.

The security configuration updates have been enforced through automatic update policy enabled through an MDM policy. However our end users would like to know when these updates are triggered by the device and installed successfully. We can see on a few devices that even though the automatic updates are enabled there are many devices with config updates pending. Also is there a way to manually install these config updates as the end user cannot see these updates listed in the software update section.

Hi, Is there a method to hide individual items in System Settings that is not Deprecated? It needs some of the settings set and hidden for the end user. I found the DisabledSystemSettings key however it is marked as Deprecated and does not include all the new items, especially those related to Apple Intelligence. Is there any method other than “Restrictions” that does not hide and only set individual settings ? It needs to hide items in system settings :)

Hello, we use an MDM profile that enables FDA for our program. The Identifier is set to be the path to our program. We'd like to have a profile that allows multiple CodeSignatures. Our older programs are signed with a different certificate than the current ones. We tried deploying 2 profiles (one for the 'old certificate' signed binary and the other for the 'new certificate' signed binary). But it looks like that MacOS accepts only one. I have also tried to use ProfileCreator to generate a profile with 2 entries, but it fails to do it. Manually editing the XML file and adding new entries does not work either. I'd like to know if there's a workaround for this issue.

This test setup is Jamf Pro as the MDM with Entra as the IdP. PSSO is working on Sequoia devices. Prior to Tahoe, PSSO required the following three items: An existing local account, the delivery of Company Portal, and a profile containing PSSO payload. Based on the Tahoe announcement, it looks like PSSO is now available during Setup Assistant, removing the requirement of first creating a local account. I assume this means that the requirements now as easy as deploying Company Portal and the PSSO profile during the Pre-Stage policy. I attempted this on the macOS 26 beta 1 and during Setup Assistant, with the PSSO profile delivered, Setup Assistant prompts me to login to my IdP. However, pressing Continue will result in a failure, notifying me that the application required is not available. The continue button is now inactive but a "try again" button is available. This results in the loop of trying and then failing, stating that the required application is not available. I eventually must quit Setup Assistant which exits it and drops me at the login window. The only account that is visible is the management account. A trip into DFU and an IPSW restore then follows. Am I trying this too soon? Is PSSO at Setup Assistant not yet fully supported? Is there another requirement other than delivering Company App in the prestige alongside the profile? I've enabled the beta channel in MAU but there is no newer Company Portal being offered. Any guidance here would be appreciated as this is the PSSO announcement I've been waiting for since the deprecation of Apple Enterprise Connect.

Hello all, We have built our own MDM solution as we plan to support quite a few devices running iOS. Manual activation is running fine and devices are checking in. We have setup ABM with Device management service setup and linked to our MDM. We have added reseller via Apple customer number and purchased devices are showing in ABM. We have setup default management service assignment as well. When we are setting up a device it gives an error: Remote Management The configuration for your iPhone could not be downloaded from . cancelled Error in the device log is as follows: Jun 11 14:16:36 iPhone Setup(DMCUtilities)[626] : <DMCHTTPRequestor: 0x84cfd7d40> cannot accept the authentication method NSURLAuthenticationMethodClientCertificate Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Task <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1> auth completion disp=2 cred=0x0 Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Task <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1> summary for task failure {transaction_duration_ms=285, response_status=-1, connection=7, reused=1, reused_after_ms=0, request_start_ms=0, request_duration_ms=0, response_start_ms=0, response_duration_ms=0, request_bytes=0, request_throughput_kbps=0, response_bytes=0, response_throughput_kbps=0, cache_hit=false} Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: TLS Client Certificates encountered error 1:89 Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Task <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1> finished with error [-999] Error Domain=NSURLErrorDomain Code=-999 UserInfo={NSErrorFailingURLStringKey=, NSErrorFailingURLKey=, _NSURLErrorRelatedURLSessionTaskErrorKey=, _NSURLErrorFailingURLSessionTaskErrorKey=, NSLocalizedDescription=} Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: encountered error(1:89) Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: cleaning up Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: summary for unused connection {protocol="http/1.1", domain_lookup_duration_ms=0, connect_duration_ms=0, secure_connection_duration_ms=0, private_relay=false, idle_duration_ms=0} Jun 11 14:16:36 iPhone Setup(DMCUtilities)[626] : <DMCHTTPRequestor: 0x84cfd7d40> failed to communicate with the MDM server. Error: NSURLError:Desc : cancelled Domain : NSURLErrorDomain Code : -999 Extra info: { NSErrorFailingURLKey = "https://mdm.domainname/enroll"; NSErrorFailingURLStringKey = "https://mdm.domainname/enroll"; "_NSURLErrorFailingURLSessionTaskErrorKey" = "LocalDataTask <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1>"; "_NSURLErrorRelatedURLSessionTaskErrorKey" = ( "LocalDataTask <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1>" ); }