Hi, To ensure the issue is not caused by an error within your app or web service request, please review the following documentation: Wallet Passes Wallet Developer Guide If the resources above don’t help identify the cause of the error, please provide more information about your app or web services to get started. To prevent sending sensitive credentials in plain text, create a report in Feedback Assistant to share the details requested below. Additionally, if the error is something we need to investigate further, the appropriate engineering teams also have access to the same information and can communicate with you directly within Feedback Assistant for more information, as needed. Please follow the instructions below to submit your report. For issues occurring with your native app or web service, perform the following steps: Install the Wallet profile on your iOS or watchOS device. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device. Create a Feedback Assistant report with the following information: The serial number of the device. Open Settings > General > About > Serial Number (tap and hold to copy). The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. Open Settings > General > About > SEID (tap and hold to copy). The sysdiagnose gathered after reproducing the issue. The .pkpass file(s), pass signing certificate(s) and pass type identiifier(s) (optional). The timestamp of when the issue was reproduced. Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or pass type identifier in the Safari Web Inspector. See Inspecting Safari on macOS to learn more. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Wallet pass implementation. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your web implementation, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Here is an AppleScript script to make it possible double-click files in Finder so that they will be opened in Vim, by Normen Hansen: https://github.com/normen/vim-macos-scripts/blob/master/open-file-in-vim.applescript (it must be used from Automator). I try to simplify it and also to make it possible to use it without Automator. To use my own version, you only need to save it as application instead, like this: osacompile -o open-with-vim.app open-with-vim.applescript and then copy it to /Applications and set your .txt files to be opened using this app. Here it is, it alsmost works: -- https://github.com/normen/vim-macos-scripts/blob/master/open-file-in-vim.applescript -- opens Vim with file or file list -- sets current folder to parent folder of first file on open theFiles set command to {} if input is null or input is {} or ((item 1 in input) as string) is "" then -- no files, open vim without parameters set end of command to "vim;exit" else set firstFile to (item 1 of theFiles) as string tell application "Finder" to set pathFolderParent to quoted form of (POSIX path of ((folder of item firstFile) as string)) set end of command to "cd" & space & (pathFolderParent as string) set end of command to ";hx" -- e.g. vi or any other command-line text editor set fileList to {} repeat with i from 1 to (theFiles count) set end of fileList to space & quoted form of (POSIX path of (item i of theFiles as string)) end repeat set end of command to (fileList as string) set end of command to ";exit" -- if Terminal > Settings > Profiles > Shell > When the shell exits != Don't close the window end if set command to command as string set myTab to null tell application "Terminal" if it is not running then set myTab to (do script command in window 1) else set myTab to (do script command) end if activate end tell return end open The only problem is the if block in the very beginning: if input is null or input is {} or ((item 1 in input) as string) is "" then What is wrong here? How to make it work? (Assuming it already works fine if AppleScript is used using Automator.)

We have created an app that uses Appintents to plug into Siri. However, launching the app >sometimes< will launch a menu that will let the user choose between the app and Contacts. Why? How can I tell Siri to not ask for Contacts?

My app monitors users heart beats and if critical reading is noticed, it auto -dials 911 for emergency and ambulance help. I was under the impression that auto-dial may not be permitted or possible on the platform. Can anyone confirm and provide any additional guidance on if it is possible in the newer SDK/API stack or using any 3rd party service ? Thank you in advance!!

Hello, I am developing a calling service using CallKit and VOIP push. I have occasionally encountered a strange issue. The issue is that VOIP permanently fails to receive calls. I was previously informed that even if the device is blocked, it can receive calls again after 24 hours. Also, when I checked the device logic, it complied with the policy requirements set by Apple, including correctly calling CallKit's reportNewIncomingCall method. Once the issue occurs, no matter how many times I try, VOIP does not receive calls, and neither a device reboot nor checking the Device Console Log shows any logs related to CallKit or VOIP. I suspect this might be an issue with the VOIP token, and I believe that the only way to get a new one is to reinstall the app. Is that correct? Of course, after reinstalling, it works fine again, but this is very inconvenient. I don't think this is the right solution. Is there anyone who can share their insights on this issue? Thank you.

The crash stack is as follows, and this crash only occurs on this model.

Is there any way to use AccessorySetupKit in the background to discover BLE devices?

Hello Everyone, I am trying to develop a DriverKit for RAID system, using PCIDriverKit & SCSIControllerDriverKit framework. The driver can detect the Vendor ID and Device ID. But before communicating to the RAID system, I would like to simulate a virtual Volume using a memory block to talk with macOS. In the UserInitializeController(), I allocated a 512K memory for a IOBufferMemoryDescriptor* volumeBuffer, but fail to use Map() to map memory for volumeBuffer. result = ivars->volumeBuffer->Map( 0, // Options: Use default 0, // Offset: Start of the buffer ivars->volumeSize, // Length: Must not exceed buffer size 0, // Flags: Use default nullptr, // Address space: Default address space &mappedAddress // Output parameter ); Log("Memory mapped completed at address: 0x%llx", mappedAddress); // this line never run The Log for Map completed never run, just restart to run the Start() and makes this Driver re-run again and again, in the end, the driver eat out macOS's memory and system halt. Are the parameters for Map() error? or I should not put this code in UserInitializeController()? Any help is appreciated! Thanks in advance. Charles

I would like to explore developing apps to integrate with Matter, but it seems that there are limited code examples available. To start with I would like to create a MacOs or iOS application to control a Matter device like a light bulb. I would as an example just like to know how to turn the light on or off. Where should I start?

is there documentation where we can find details for historical parameters / limitations - so far i've found that the days limit on single API calls days limit is 7. Any other similar specs would be good to have

where can we find documentation on the following fields included in payloads? They're not listed alongside the other fields in the documentation linked below: https://developer.apple.com/documentation/weatherkitrestapi/hourweatherconditions precipitationIntensity snowfallAmount Or if we can get the data type, unit used, and description here that would be great

hi so im trying to create a simple app that has two pressable buttons that turn a spa mode on and off wishing another app so far I have the UI figured out the app works the only issue is right now when I press spa on I have setup so it opens Siri Shortcuts and enables the shortcut is there a way to make the app revert back to mine after the action is done? or is there another way to open the other app and navigate to the button within that app and enable it behind my app

User Initiated a Single Consumable Purchase but Was Charged Twice A user initiated a single in-app purchase for a consumable item, but they were charged twice. Both transactions have the same purchase token. Additional details: After the user successfully completed the in-app purchase, the completeTransactions callback was triggered again. This was called at app launch using SwiftyStoreKit.completeTransactions to finish any pending transactions. Could this be causing the duplicate charge? Any insights would be appreciated.

users download app with Streamlined Purchasing ,but the logic of checking subscription doesn't work. there the code: func checkSubscriptionStatus() async { for await entitlement in Transaction.currentEntitlements { guard case .verified(let transaction) = entitlement else { continue } if transaction.productID == monthlyProductID || transaction.productID == yearlyProductID { if transaction.revocationDate == nil && !transaction.isUpgraded { let activeSubscribed = transaction.expirationDate ?? .distantFuture > .now if activeSubscribed { hasActiveSubscription = activeSubscribed // other operation } } } } }

While troubleshooting Tap to Pay on iPhone, it is essential that the developer is able to collect logs on their device and check those logs for error messages. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Tap to Pay profile on your iPhone. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iPhone. Create a Feedback Assistant report with the following information: The bundle ID The serial number of the device. For iOS, open Settings > General > About (tap and hold to copy). The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS, open Settings > General > About > SEID (tap and hold to copy). The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. Screenshots or videos of errors and unexpected behaviors (optional). Submitting Your Feedback After your submission to Feedback Assistant is complete, please respond to your post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your app, a configuration issue within your developer account, app configuration, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

I cannot access my corporate invoice. I don't know why I couldn't reach it. How and where can I reach it?

We're having trouble with getting Siri to hand off specific trigger words to our app via shortcuts. I want to be able to say "Hey Siri Myappname Foobar" but in some cases if Foobar is the name of a specific business it may launch maps instead showing locations of those businesses. Is there any way to inform Siri, "no, *****, launch our app as the shortcut specifies!"

We developing an app, It's a Parental control app required to block large number of apps. In child mobile installed more than 200 apps parent has to block and disable these apps but parent cant able to block more than 50 apps. Is there any option is there to block all the 200 apps from child mobile.

Hello everyone, I’m currently developing an app that uses the Family Controls API, specifically the Screen Time API. However, my current entitlement is limited to development mode, which prevents me from publishing my app on TestFlight. I have already contacted Apple Developer Support for production access but wanted to reach out to the community as well and I was referenced to FamilyControls API documentation and I couldn't find anything related to my case. Has anyone successfully upgraded their entitlement from development-only to production? Any insights on the process, tips for communicating with Developer Support, or guidance on ensuring full compliance with the Family Controls guidelines would be extremely helpful.

In core-data I have a contact and location entity. I have one-to-many relationship from contact to locations and one-to-one from location to contact. I create contact in a seperate view and save it. Later I create a location, fetch the created contact, and save it while specifying the relationship between location and contact contact and test if it actually did it and it works. viewContext.perform { do { // Set relationship using the generated accessor method currentContact.addToLocations(location) try viewContext.save() print("Saved successfully. Locations count:", currentContact.locations?.count ?? 0) if let locs = currentContact.locations { print("📍 Contact has \(locs.count) locations.") for loc in locs { print("➡️ Location: \(String(describing: (loc as AnyObject).locationName ?? "Unnamed"))") } } } catch { print("Failed to save location: \(error.localizedDescription)") } } In my NSManagedObject class properties I have this : for Contact: @NSManaged public var locations: NSSet? for Location: @NSManaged public var contact: Contact? in my persistenceController I have: for desc in [publicStore, privateStore] { desc.setOption(true as NSNumber, forKey: NSPersistentStoreRemoteChangeNotificationPostOptionKey) desc.setOption(true as NSNumber, forKey: NSPersistentHistoryTrackingKey) desc.setOption(true as NSNumber, forKey: NSMigratePersistentStoresAutomaticallyOption) desc.setOption(true as NSNumber, forKey: NSInferMappingModelAutomaticallyOption) desc.setOption(true as NSNumber, forKey: "CKSyncCoreDataDebug") // Optional: Debug sync // Add these critical options for relationship sync desc.setOption(true as NSNumber, forKey: "NSPersistentStoreCloudKitEnforceRecordExistsKey") desc.setOption(true as NSNumber, forKey: "NSPersistentStoreCloudKitMaintainReferentialIntegrityKey") // Add this specific option to force schema update desc.setOption(true as NSNumber, forKey: "NSPersistentStoreRemoteStoreUseCloudKitSchemaKey") } When synchronization happens on CloudKit side, it creates CKRecords: CD_Contact and CD_Location. However for CD_Location it creates the relationship CD_contact as a string and references the CD_Contact. This I thought should have come as REFERENCE On the CD_Contact there is no CD_locations field at all. I do see the relationships being printed on coredata side but it does not come as REFERENCE on cloudkit. Spent over a day on this. Is this normal, what am I doing wrong here? Can someone advise?