I have three apps with a very low user rate, so it's easier to compare. In all three apps, when I send a notification to APNs, over two-thirds receive a "Stored - Device Offline" status, but only one or two notifications are delivered afterward. No message has been sent after that. The total number of recipients is 89; 26 were delivered to the device, and 62 were stored in APNs. One was delivered from storage, and one was discarded. All app users are located in the same region, and mobile internet or Wi-Fi is available everywhere. I can't believe that so many iPhone users aren't getting connected to APNs to receive the stored message. Or are event not connected. Or are there any other reasons why a notification cant be transmitted. (User beahaviour, time of not using the app or something else?)

Hi Apple Team, we reiceved the following message. Hello, We’re reaching out with a final reminder that the Certification Authority (CA) for Apple Push Notification service (APNs) is changing. APNs updated the server certificates in sandbox on January 21, 2025. APNs production server certificates will be updated on February 24, 2025. To continue using APNs without interruption, you’ll need to update your application’s Trust Store to include the new server certificate: SHA-2 Root: USERTrust RSA Certification Authority certificate. Our web service sends token-based push notifications directly to the Apple Push server. For testing: https://api.development.push.apple.com:443 In production: https://api.push.apple.com:443 We have never installed any certificates for using APNs. Do we need to take any action regarding this message, or can we ignore it?

I'm sending push notifications to a notification extension, and within the extension setting the threadIdentifier to be the same. But I'm observing inconsistent grouping behaviour, and behaviour that changes over time. The general iPhone settings are to display notifications as a Stack, and the app settings are to show on lock screen, notification center and banners and the notification grouping is set to by app (changing it to automatic doesn't affect the behaviour below). Pushes are displayed on the lock screen grouped together, then if the device is roused and the screen swiped down to reveal the notification center then they are still grouped. So far so good. If the iphone is active then the notifications appear at the top of the screen, one by one, but in this case if there is a swipe down to reveal the notification center then the notifications are not grouped when displayed, but shown individually. But then if one waits a few minutes and then displays the notification center for a 2nd time, sometimes now they will be grouped, but sometimes not. Why are they not (always) being displayed as grouped in the notification center?

I am using push notification in my app. User token gets properly registered and is sent to server. Notification are also sent by server and recieved on device as expected. The problem occurs when user uninstalls the app. iOS does not provide any option to handle uninstall event. On top of that when server send notification to such device token APNS feedback service sends success message. Meaning APNS sends push notifications to uninstalled app.I have an API to unregister the device on server since no event is triggered I am unable to call it.Please suggest a way out.

We have a case when we send 8 push notifications more or less simultaneously over 1 HTTP 2.0 connection. Using .NET Core 8 Sometimes some of them fail with a strange message: System.Net.Http.HttpRequestException: The response ended prematurely while waiting for the next frame from the server. (ResponseEnded) ---> System.Net.Http.HttpIOException: The response ended prematurely while waiting for the next frame from the server. (ResponseEnded) at System.Net.Http.Http2Connection.ThrowRequestAborted(Exception innerException) at System.Net.Http.Http2Connection.Http2Stream.TryEnsureHeaders() at System.Net.Http.Http2Connection.Http2Stream.ReadResponseHeadersAsync(CancellationToken cancellationToken) at System.Net.Http.Http2Connection.SendAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) --- End of inner exception stack trace --- at System.Net.Http.Http2Connection.SendAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.HttpConnectionPool.SendWithVersionDetectionAndRetryAsync(HttpRequestMessage request, Boolean async, Boolean doRequestAuth, CancellationToken cancellationToken) at System.Net.Http.RedirectHandler.SendAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at System.Net.Http.DecompressionHandler.SendAsync(HttpRequestMessage request, Boolean async, CancellationToken cancellationToken) at Microsoft.Extensions.Http.Logging.HttpClientLoggerHandler.SendAsync(HttpRequestMessage request, CancellationToken cancellationToken) We noticed that failure is always accompanied with a huge delay (~500ms) comparing to success (~20ms). Also some of the burst messages are sent successfully (sometimes 2-4 of them) What can we do about it?

In macOS, how can I use UnmutableNotificationContent notifications to prevent the main window from activating when clicking the notification? code： import Cocoa import UserNotifications // Mandatory import for notification functionality class ViewController: NSViewController { override func viewDidLoad() { super.viewDidLoad() // Automatically request permissions and send a test notification when the view loads sendLocalNotification() } /// Core method to send a local notification func sendLocalNotification() { let notificationCenter = UNUserNotificationCenter.current() // 1. Request notification permissions (Mandatory step; user approval required) notificationCenter.requestAuthorization(options: [.alert, .sound, .badge]) { [weak self] isGranted, error in guard let self = self else { return } // Handle permission request errors if let error = error { print("Permission request failed: \(error.localizedDescription)") return } // Exit if user denies permission if !isGranted { print("User denied notification permissions; cannot send notifications") return } // 2. Construct notification content using UNMutableNotificationContent let notificationContent = UNMutableNotificationContent() notificationContent.title = "Swift Notification Test" // Notification title notificationContent.subtitle = "macOS Local Notification" // Optional subtitle notificationContent.body = "This is a notification created with UNMutableNotificationContent" // Main content notificationContent.sound = .default // Optional notification sound (set to nil for no sound) notificationContent.badge = 1 // Optional app icon badge (set to nil for no badge) // 3. Set trigger condition (here: "trigger after 3 seconds"; can also use time/calendar triggers) let notificationTrigger = UNTimeIntervalNotificationTrigger( timeInterval: 3, // Delay in seconds repeats: false // Whether to repeat (false = one-time only) ) // 4. Create a notification request (requires a unique ID for later cancellation if needed) let notificationRequest = UNNotificationRequest( identifier: "SwiftMacNotification_001", // Unique identifier content: notificationContent, trigger: notificationTrigger ) // 5. Add the request to the notification center and wait for triggering notificationCenter.add(notificationRequest) { error in if let error = error { print("Notification delivery failed: \(error.localizedDescription)") } else { print("Notification added to queue; will trigger in 3 seconds") } } } } }

Hi, We are using Firebase to configure APNs (Apple Push Notification Service) for sending push notifications. During local testing, the push notifications are received properly when the app is in the foreground or background. After TestFlight testing and passing review, we found that when the app is installed using the developer's Apple ID, push notifications are received correctly whether the app is in the foreground or background. However, when the app is provided to other testers (using non-developer Apple IDs), notifications are only received when the app is in the foreground, and they are not triggered when the app is in the background or inactive state. Request for Assistance: Why, after TestFlight testing and passing review, does the app receive push notifications properly in the background when installed using the developer's Apple ID, but on other testers' devices, notifications are not received when the app is in the background? Are there any differences in Apple ID types or device configurations (developer ID vs. regular tester ID) that could affect the behavior of push notifications in the background mode? Do we need to apply any additional settings or permissions, particularly for handling background push notifications? Are there any iOS version or device-specific limitations that could impact the proper delivery of background push notifications? Additional Information: The app is properly configured for APNs, and push notifications are being sent via Firebase. In the developer's Apple ID test environment, the app receives push notifications properly whether it is in the foreground or background. On other testers' devices, push notifications are only received when the app is in the foreground, and they are not received when the app is in the background. All test devices have been verified to have notification permissions enabled, and Firebase configuration is correct.

Hi everyone, I'm developing a custom Apple Wallet pass using a Django backend and exposing my local server through ngrok during development. For the first ~30 minutes, everything works exactly as expected: the pass registers correctly, silent push notifications trigger instant updates, Wallet immediately performs the GET request to fetch the new .pkpass, and the changeMessage displays almost instantly on the lock screen. At some point, however, the pass stops updating entirely. Apple APNs continues to return 200 OK for every silent push I send, but the device never performs the required GET /v1/passes// call to download the updated pass. As a result, even the internal content of the pass (ex: points/balance fields) no longer updates, which confirms that Wallet is not fetching the new .pkpass at all. No changeMessage appears either. This behavior has been described informally by other developers as Apple Wallet Pass Update Throttling, where the Wallet daemon begins ignoring silent pushes after repeated updates or certain internal conditions. I’m trying to confirm whether this is indeed throttling, what triggers it, and how to avoid it during development.

Version: iOS 18.1 and later (works as expected on iOS 18.0 and earlier) Area: SpringBoard / Notification Center / App Icon Rendering Description: When changing the app's alternate icon using UIApplication.setAlternateIconName(_:completionHandler:), the icon is updated correctly on the Home Screen and App Switcher. However, in Notification Center, the old app icon is still shown for notifications, even after the change has completed. This issue only occurs on iOS 18.1 and later. In iOS 18.0 and earlier, Notification Center correctly reflects the updated icon. - Steps to reproduce: Create an iOS app with alternate app icons configured in the Info.plist. Use UIApplication.shared.setAlternateIconName("IconName") to change the icon at runtime. Send a notification. Pull down Notification Center and observe the icon shown beside the notification. - Expected Behavior: Notification Center should reflect the updated (alternate) app icon immediately after the change. - Actual Behavior: Notification Center continues to display the old (primary) app icon. The new icon appears correctly on the Home Screen and App Switcher. Restarting the device does cause Notification Center to update and reflect the correct icon, which suggests a cache or refresh issue in SpringBoard or Notification Center. - Notes: Issue introduced in iOS 18.1; not present in 18.0. Reproduces on both physical devices and simulators. Occurs with both scheduled local notifications and remote notifications. Restarting the device updates the Notification Center icon, but this is not a viable user-facing workaround.

I got notification filtering permission from appStoreConnect, i.e. com.apple.developer.usernotifications.filtering, but not able to suppress notification even after setted contentHandler(UNNotificationContent()) and contentHandler(UNMutableNotificationContent()). Added entitlements in both extension and main app, also in signing profile these Entitlements are visible, what other changes should I do?

Hello Apple Developer Team, Based on the mandate to update the APNs certificate by February 24, 2025 for certificate-based authentication, a question from the team has been brought up that maybe Apple or the community can help answer. Since our implementation uses token-based authentication, I’m seeking clarification on a couple of points: 1. Does the certificate update affect token-based connections at all? 2. What is the rationale behind updating certificates for certificate-based authentication, and are there any implications or benefits for developers using token-based authentication? Understanding these details will help us ensure our system remains compliant and optimally configured. Any guidance or further clarification you can provide would be greatly appreciated. Thank you!

Hello, We are facing issue that sometimes a voip notification gets delivered after it is expired. The issue can be simply demonstrated we set the device to flight mode, and after 20s we disable flight mode. We still receive the voip notification. We are setting the expiration header as following apns-expiry=0, so from my understanding it should not be delivered if the device was not able to receive the notification in the fist attempt. I have read following thread https://developer.apple.com/forums/thread/778512, from which I understand this is a long standing issue. Hence my question is, is there any way how we can notify the call kit that the call is actually no longer valid, and do not display the call to the user at all? Currently we are forced to always display CallKit call when the notification comes, and some of our users are confused that they see a missed call which they did not have any chance to pick up. Please let me know if you need any more information. Best Regards, Adam Chlupacek

Hi Apple Support team, I would like to inform you that we were receiving push notifications to all regions. Recently we were facing push notifications are not receiving to brazil region. For all other regions we are receiving. We are using same APSN certificate. Any region specific permissions do we need to add. Please let me know. Thanks.

I a using the current RC version of iOS on both my iPhone and iPad. I and developing an iCloud based app and it works correctly on iOS 18. When I upgraded to iOS 26 the iCloud functions work correctly but the push notifications do not work. The issue appears to be creating subscriptions. The following code should create a subscription and does not get an error, but it did to create a subscription under iOS 26. func subscribeToNotifications(recordType: String, subscriptionID: String, notification: CKSubscription.NotificationInfo) { let subscriptionIDForType = "\(subscriptionID)-\(recordType)" let predicate = NSPredicate(value: true) let subscription = CKQuerySubscription(recordType: recordType, predicate: predicate, subscriptionID: subscriptionIDForType, options: [.firesOnRecordCreation, .firesOnRecordUpdate, .firesOnRecordDeletion]) let notification = CKSubscription.NotificationInfo() subscription.notificationInfo = notification CKContainer.default().publicCloudDatabase.save(subscription) { (returnedSubscription, error) in if let error = error { print("Error saving subscription: \(error)") } else { print("Successfully saved subscription: recordType: " + recordType + " subscriptionID: " + subscriptionIDForType) } } } Print results: Successfully saved subscription: recordType: folder subscriptionID: folderName-folder

If a notification: ONE_TIME_CHARGE is used to ship the IAP content, it involves a point where the client might not finish the transaction, yet the item is shipped. Will an unfinished purchase affect refunds?

UNNotificationAttachment convenience init method seems to be checking for supported file types based on the extension of the file URL provided as a constructor parameter. This seems to be sub-optimal at best and incorrect at worst. Is this is a known issue for which a bug already exists?

I got a notification that the Certification Authority (CA) for Apple Push Notification service (APNs) is changing. Does this affect the push service for Apple Wallet passes or just for apps? I have a push service for Apple Wallet passes but no service for apps. I don't use push notification service for anything other than for Apple Wallet Pass push notifications, not at all for apps. Is there anything I need to do or is this not relevant to my situation? If it does, what do I need to change in order to make sure my service still works? Do I just replace the certificate? Is there a standard path where it would live on the server? I'm sure this is a simple thing, but it's been over a decade since I wrote the push service so I'm pretty rusty.

I'm observing that when a silent push notification is sent to our app, is is started up in the background for 30 seconds before being suspended until the app is launched by the user. This causes data to persist from the silent push notification to the user app launch. I couldn't find documentation on this behavior for silent push notifications, and was wondering if it's possible to have the app terminate after handling the silent push notification. Is there documentation on the general flow of silent push notifications as well? I'm able to handle the edge cases if the app has to be suspended until user launch, but just want to confirm that this is the expected behavior before I go about handling it this way.

Our team also received this email regarding the APNS. I don't know if I need to do something or not, since I haven't found any information in SAP Forums either. Our app uses the SAP Mobile Services push notifications. If any of you know any information about this, please let me know.

I have created a configuration profile which basically just turns off notifications for Shortcuts app but I am unable to install it on my iPhone as I am getting the following error “This profile can be installed on a supervised device only” can someone please help me with this? Would also appreciate if you have another way to turn off shortcuts notifications permanently since when I turn it off via screen time it keeps turning itself ON every couple of days.