I'm developing a single target watchOS app that obtains HealthKit information. I have the "Background Delivery" option checked under "Signing & Capabilities" for the watch target. The app does HKObserverQueries in the foreground that work as I would expect. But when I click the Digital Crown to return to clock face, the HKObserverQuery activity stops. I'm using Xcode 15.4, on Mac 14.5 and a Apple Watch Series 4 running 10.5.

https://support.apple.com/zh-cn/104959 Our application provides car insurance services. Does Apple have any API related to car accident detection exposed to developers? We want to do something when an iPhone detects a car accident

Hello, we want to re-create these graphs and use the raw data for analysis. We are getting aggregated elevation, heath rate, and pace data, but need to locate the specifics to create these graphs. Thank you

I am building a watchOS app with iOS companion app. The watch app needs to track the heart rate during the night or while user is sleeping. And the desired frequency of measurement is 0.2Hz (every 5 seconds) For this I am using the HKWorkout mode with mindAndBody session. While it works fine, One of the main issue is: after about 6-7 hours of usage, the battery on the watch drains between 40% (Series 9) and 100% (series 7, I think) My questions: Are there any other option to track user's heart rate without workout, while the app could be in background? Another side effect of this workout mode is, Even if we choose not to save the workout in HealthKit, the Activity rings gets populated by this mindAndBody session, which makes it when the user is waking up, the bar is already full, This is not desired. Is there any option to specify for ActivityRing skips this? Highly appreciate any help in advance. Cheers - Prakash

Good afternoon, I am working on a workout tracking app. So far everything is working as expected. However, I note that when my workout saves and is visible within the Fitness App, the workout duration is displayed rather than the kCal burned. What changes are required to be made in order for this to display the kCal in the list of workouts in Fitness rather than duration? For reference https://developer.apple.com/videos/play/wwdc2021/10009 this was my reference source for workout functionality.

I've been trying to figure out what the bare minimum is required for HKWorkoutBuilder to create a workout that adds time the appleExerciseTime. I couldn't find the documentation for this. This is my code so far. func createWorkoutSample( expectedActiveEnergyData: [Double], expectedExerciseMinutesData: [Double], calendar: Calendar, startDate: Date ) async throws -> [HKSample] { var testData: [HKSample] = [] let workoutConfiguration = HKWorkoutConfiguration() workoutConfiguration.activityType = .running workoutConfiguration.locationType = .outdoor let results = try await withThrowingTaskGroup(of: HKSample?.self) { group in for (index) in 0..<expectedActiveEnergyData.count { guard let date = calendar.date(byAdding: .day, value: index, to: startDate) else { continue } group.addTask { let builder = HKWorkoutBuilder( healthStore: self.manager.healthStore, configuration: workoutConfiguration, device: .local() ) let endDate = date.addingTimeInterval(expectedExerciseMinutesData[index] * 60) try await builder.beginCollection(at: date) let energyType = HKQuantityType.quantityType( forIdentifier: .activeEnergyBurned )! let energyQuantity = HKQuantity( unit: HKUnit.kilocalorie(), doubleValue: expectedActiveEnergyData[index] ) let energySample = HKQuantitySample( type: energyType, quantity: energyQuantity, start: date, end: endDate ) return try await withCheckedThrowingContinuation { continuation in builder.add([energySample]) { (success, error) in if let error = error { continuation.resume(throwing: error) return } builder.endCollection(withEnd: endDate) { (success, error) in if let error = error { continuation.resume(throwing: error) return } builder.finishWorkout { (workout, error) in if let error = error { continuation.resume(throwing: error) return } continuation.resume(returning: workout) } } } } } } for try await workout in group { if let workout = workout { testData.append(workout) } else { print("Skipping nil workout result.") } } return testData } print("Total samples created: \(results.count)") return results } When I query appleExerciseTime, there are no results. I've looked at the HKWorkoutBuilder documentation, and most of the information expands on adding samples related to the deprecated HKWorkout.

Hi, I've had trouble for a while now with HealthKit giving me different values if I make the request on iOS and WatchOS. I am using the exact same method on both with the same parameters but I get vast differences in the results. The code I am using to call HealthKit on both devices is: let dateRange = HKQuery.predicateForSamples(withStart: Date().removeMonths(numberOfMonths: 1), end: Date().endOfDay()) let predicate: NSPredicate predicate = NSCompoundPredicate(type: .and, subpredicates: [dateRange]) let query = HKStatisticsQuery(quantityType: HKQuantityType(.stepCount), quantitySamplePredicate: predicate, options: .cumulativeSum) { _, result, error in if error != nil { //print("Error fetching step count, or there is no data: \(error.localizedDescription), \(startDate) -> \(endDate)") onComplete(0) return } if let result, let sum = result.sumQuantity() { let stepCount = sum.doubleValue(for: HKUnit.count()) DispatchQueue.main.async { onComplete(Int(stepCount)) } } } healthStore.execute(query) }

Is there documentation on how to read workout effort scores from a HealthKit workout? I'm interested in reading workoutEffortScore and estimatedWorkoutEffortScore. I have not been successful trying to read them using the same method that I do other workout HKQuantityTypes (heartRate, stepCount, etc). I'm using Swift and I do have authorization for those types requested and granted. I have found documentation on setting these values (https://developer.apple.com/forums/thread/763539) but not reading them. Thank You

In my WatchOS app I've written the following code to check if my app has access to the user's health data: func isHealthKitAuthorized() -> Bool { let typesToRead: [HKObjectType] = [ HKObjectType.quantityType(forIdentifier: .heartRate)!, HKObjectType.quantityType(forIdentifier: .activeEnergyBurned)!, HKObjectType.quantityType(forIdentifier: .appleMoveTime)!, HKObjectType.quantityType(forIdentifier: .appleExerciseTime)!, HKObjectType.workoutType() ] let typesToShare: Set<HKSampleType> = [ HKObjectType.workoutType(), HKObjectType.quantityType(forIdentifier: .activeEnergyBurned)!, HKObjectType.quantityType(forIdentifier: .heartRate)! ] var isAuthorized = true for type in typesToRead { let status = healthStore.authorizationStatus(for: type) if status != .sharingAuthorized { print("Access denied to: \(type.identifier)") isAuthorized = false } } for type in typesToShare { let status = healthStore.authorizationStatus(for: type) if status != .sharingAuthorized { print("Access denied to: \(type.identifier)") isAuthorized = false } } return isAuthorized } However for the appleMoveTime and appleExerciseTime types their status is returning as 'sharingDenied' (checked by printing the status' rawValue) even though they are authorized on the Watch's settings. This happened both on the simulator and on the Watch itself. Am I doing something wrong?

Hello, I am currently working on an app that uses HealthKit to sync health data to a backend server that performs analysis on this data. I am keeping track of the synced data with the HKQueryAnchor I receive for each query I make. I want to address an edge case: if a user has multiple devices running the app, would it make sense to store the anchor on my backend? This would ensure that other instances of the app do not sync data that has already been synced from another device. Thank you for your help!

I am working on a Smart Alarm app for Watch OS. When testing on an Series 10 watch, I am successfully able to read heart rate data in the ExtendedRuntimeSession. However, although the calls succeed, the sleep analysis data is all 0. The app successfully gets authorization for: [HKQuantityType(.heartRate), HKObjectType.categoryType(forIdentifier: .sleepAnalysis)!] I have read that sleep data is not available for less than an hour time period. The Smart Alarm extended session has a 30 minute limit. Does that mean it is not possible to read sleep analysis data in a Smart Alarm extended session? Thank you!

I can create WorkoutGoals of all kinds except .energy, but I can't find any indication of the conditions under which energy goals can be used. No matter what I try, the response from supportsGoal is always false e.g. CustomWorkout.supportsGoal(.energy(10, .kilojoules), activity: .running, location: .outdoor) CustomWorkout.supportsGoal(.energy(10, .calories), activity: .cycling, location: .outdoor) CustomWorkout.supportsGoal(.energy(10, .kilocalories), activity: .running, location: .outdoor) For any combination I've tried, I get Not supported due to unsupportedGoal Has anybody managed to successfully create energy goals?

In the fitness app under iOS 18, the location of all workouts is displayed on a small map. For workouts with routes, I can already successfully read out the route and thus also determine the starting point. So that works. For indoor workouts such as yoga or indoor rowing, the exact location is also displayed in the fitness app. I would now also like to read out this location for these indoor workouts in my app. Does anyone know how to do this?

I have a strange situation and I'm not sure where else to post this. Our app's domain (or at least its API hostname in the domain) resolves to something different only inside of Apple's network. I was able to get an Apple employee to verify this by resolving the API hostname while on Apple's corporate network and it resolves to an IP that is in Apple's 17.0.0.0/8 network, but everywhere else resolves to the normal IPs. Our domain's DNS is provided by Cloudflare and they are not doing anything special for Apple's network. This is causing problems during App Review because the app is trying to reach our API to log in and instead is being routed to an IP in Apple's network, so it fails SSL validation and presents an error dialog. App Review is then claiming our app doesn't work and rejecting it. This is an app that has been in the App Store for over a decade and gone through countless app reviews. App Review was of no help resolving this and I don't know where else to turn. How can I find out why our domain is being rerouted inside of Apple and get this fixed?

Dear Apple Developer Support, I am writing to request assistance with an ongoing issue I'm encountering while developing an iOS application that utilizes HealthKit to fetch heart rate data. My goal is to display near real-time heart rate updates continuously same as displaying in the Apple Watch , I want to show in the iPhone Mobile Application for fitness related. I have implemented the following approaches: HKSampleQuery with a Timer: I've set up a timer to periodically fetch the latest heart rate data. Despite these efforts, I'm consistently facing the following problems: Delayed Updates: The heart rate data displayed in the app often doesn't reflect the current heart rate being measured by the Apple Watch. There seems to be a significant synchronization delay. Inconsistent Background Updates: Background updates, even with background app refresh enabled, are not reliable. The app often only updates when brought to the foreground or after being killed and relaunched. Entitlements: The com.apple.developer.healthkit.background-delivery entitlement error is missing. I have thoroughly reviewed Apple's HealthKit documentation, implemented best practices for HealthKit integration, and verified that all necessary permissions are properly configured. I understand that HealthKit may not be designed for true real-time data, but the current level of delay and inconsistency is making it difficult to provide a useful user experience. Could you please provide guidance on whether achieving near real-time heart rate updates continuously in an iOS app using HealthKit is possible? If so, what are the recommended strategies and best practices to overcome these limitations? I have also tested the application on physical devices with Apple Watch, enabled background app refresh, granted permissions, and referred to HealthKit documentation. I would appreciate any insights or suggestions you can offer to help resolve this issue. Thank you for your time and assistance. Sincerely, Venu Madhav

Apple Watch automatically tracks sleep data and syncs it to the iPhone, making it available through HealthKit for historical analysis. However, there is no way to retrieve real-time data on whether a user has entered sleep, or whether they are in a specific sleep stage at any given moment. Is it possible to provide an interface for real-time sleep status monitoring

Platform & Version: iOS Version: 18.3.1 Development Environment: Xcode 16.2, macOS 14.6.1 Description of the Issue: We're exploring ways to better integrate Apple Fitness+ workouts into our app. We've noticed that some third-party apps, such as Strava and HealthFit, now display Fitness+ workout details, including the title, trainer, and an image. I’ve been investigating how this is possible, and the only relevant change I’ve found is that HKMetadataKeyAppleFitnessPlusCatalogIdentifier is now being set for Fitness+ workouts. However, I can’t find any public API or official documentation that explains how to use these identifiers to retrieve the associated workout details. Question: Is there an official API available to fetch metadata for Fitness+ workouts using these identifiers? Or are these third-party apps potentially accessing private APIs? If no API exists, is the only option to create a manual mapping of these identifiers—something that seems impractical given the constantly evolving Fitness+ workout catalog? Any guidance on this would be greatly appreciated. Thanks!

The background deliver works perfectly when the app is in the background or suspended states. However, when the app is killed (terminated state), the background task does not execute

I’m trying to associate heart rate (HR) data with a mindfulness session (HKCategoryTypeIdentifier.mindfulSession) in HealthKit, but I can’t find any documentation on how to do this. I’ve seen third-party apps (like Medito) successfully log HR within Mindful Minutes, even when the session takes place on an iPhone (not an Apple Watch). However, when I try saving HR in the metadata, it does not appear in the Health app's Mindful Minutes section. Code snippet: func logMindfulnessSession(start: Bool, heartRate: Double? = nil) { let mindfulType = HKCategoryType.categoryType(forIdentifier: .mindfulSession)! let now = Date() let endTime = now.addingTimeInterval(Double(selectedDuration)) var metadata: [String: Any]? = nil if let hr = heartRate { let heartRateUnit = HKUnit.count().unitDivided(by: HKUnit.minute()) let hrQuantity = HKQuantity(unit: heartRateUnit, doubleValue: hr) metadata = ["heartRate": hrQuantity] // ❓ Is there a correct key for HR? } let sample = HKCategorySample( type: mindfulType, value: 0, start: now, end: endTime, metadata: metadata ) healthStore.save(sample) { success, error in if let error = error { print("HealthKit session save error: \(error.localizedDescription)") } else { print("Mindfulness session saved successfully.") if let hr = heartRate { print("Saved with HR: \(hr) BPM") } } } } Questions: What is the correct metadata key for associating heart rate with a mindful session? Does HealthKit require a specific format (e.g., HKQuantitySample) for HR? 0 Are there additional permissions needed to allow HR to appear in Mindful Minutes? Does HR need to be stored separately in HKQuantityTypeIdentifier.heartRate, and if so, how do third-party apps ensure it appears in the same entry as the mindful session? thank you!

I have an App in objective-c that is using Health data (walk/run, cycling) to give advice to users . I do not want/need to write any data in the Healtkit. If i do (with the 3 values in the plist / .info : self.healthStore requestAuthorizationToShareTypes:nil readTypes:readDataTypes My request crashes. *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: 'Must request authorization for at least one data type' *** First throw call stack: ( 0 CoreFoundation 0x00000001804b910c __exceptionPreprocess + 172 1 libobjc.A.dylib 0x0000000180092da8 objc_exception_throw + 72 2 CoreFoundation 0x00000001804b901c -[NSException initWithCoder:] + 0 3 HealthKit 0x000000019da034d4 -[HKHealthStore _validateAuthorizationRequestWithShareTypes:readTypes:] + 92 4 HealthKit 0x000000019da03670 -[HKHealthStore requestAuthorizationToShareTypes:readTypes:shouldPrompt:completion:] + 292 BUT in swift : healthStore.requestAuthorization(toShare: nil, read: readTypes) is working, présents only my 2 datas to read... in the same IOS , same phone without crashing. What is the difference ? Nil object in objective-c and Nil object in swift are not the same ? how do i make readonly requests in objective C ?