I have a command line utility I wrote that has been working great up until Sequoia that reads the macro keys from a Logitech G600 gaming mouse and turns it in to custom commands. it was using the following code, checking if usage was 0x80: IOHIDManagerRegisterInputValueCallback( g600HIDManager, { _, returnResult, callbackSender, valueRef in let elem = IOHIDValueGetElement(valueRef) let usage = IOHIDElementGetUsage(elem) let pressed = IOHIDValueGetIntegerValue(valueRef) Now i'm having issues with opening the HID manager: IOHIDManagerOpen(g600HIDManager, IOOptionBits.zero) After changing the system security from permissive to restrictive, It's giving the error code 0xE00002E2, or no permission. I can't easily add the sandbox entitlements as this is just a simple CLI application, not a bundled app, and even after setting back to csrutil disable, i'm still getting this error. So now i'm trying to turn it in to a bundled app and use CoreHID instead. Unfortunately I'm not getting any notifications that aren't the mouse itself. From the above code that was working before, i was looking for usage values of 0x80. I'm guessing that directly corresponds to the usage 0x80 in the HID descriptor. I am receiving notifications via await deviceClient!.monitorNotifications(reportIDsToMonitor: [] , elementsToMonitor: [] ) which should pick up everything for the device. I know the usage i'm looking for is referenced in the device client because it's in the deviceClient.elements collection. So is there something in CoreHID that specifically blocks Vendor specified Usage pages from being picked up by notifications? I've also tried just requesting the elements using let elemToMon = await deviceClient?.elements.filter({ ele in return ele.usage.page == 0xFF80 && ele.usage.usage == 0x80 }) let request = HIDDeviceClient.RequestElementUpdate(elements: elemToMon!) let results = await deviceClient!.updateElements([request]) but that call errors (still trying to figure out exactly how it errors). Any help would be appreciated, either in figuring out why i'm not getting the HID reports in question using CoreHID, or even what has changed that is causing me to not be able to use IOKit.hid anymore. Thanks in advance! For reference, here's the decoded HID descriptor: 0x05, 0x01, // Usage Page (Generic Desktop Ctrls) 0x09, 0x06, // Usage (Keyboard) 0xA1, 0x01, // Collection (Application) 0x85, 0x01, // Report ID (1) 0x05, 0x07, // Usage Page (Kbrd/Keypad) 0x19, 0xE0, // Usage Minimum (0xE0) 0x29, 0xE7, // Usage Maximum (0xE7) 0x15, 0x00, // Logical Minimum (0) 0x25, 0x01, // Logical Maximum (1) 0x75, 0x01, // Report Size (1) 0x95, 0x08, // Report Count (8) 0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) 0x75, 0x08, // Report Size (8) 0x95, 0x05, // Report Count (5) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xA4, 0x00, // Logical Maximum (164) 0x19, 0x00, // Usage Minimum (0x00) 0x2A, 0xA4, 0x00, // Usage Maximum (0xA4) 0x81, 0x00, // Input (Data,Array,Abs,No Wrap,Linear,Preferred State,No Null Position) 0xC0, // End Collection 0x06, 0x80, 0xFF, // Usage Page (Vendor Defined 0xFF80) 0x09, 0x80, // Usage (0x80) 0xA1, 0x01, // Collection (Application) 0x85, 0x80, // Report ID (-128) 0x09, 0x80, // Usage (0x80) 0x75, 0x08, // Report Size (8) 0x95, 0x05, // Report Count (5) 0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) 0x85, 0xF6, // Report ID (-10) 0x09, 0xF6, // Usage (0xF6) 0x75, 0x08, // Report Size (8) 0x95, 0x07, // Report Count (7) 0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) 0x85, 0xF0, // Report ID (-16) 0x09, 0xF0, // Usage (0xF0) 0x95, 0x03, // Report Count (3) 0xB1, 0x02, // Feature (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) 0x85, 0xF1, // Report ID (-15) 0x09, 0xF1, // Usage (0xF1) 0x95, 0x07, // Report Count (7) 0xB1, 0x02, // Feature (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) 0x85, 0xF2, // Report ID (-14) 0x09, 0xF2, // Usage (0xF2) 0x95, 0x04, // Report Count (4) 0xB1, 0x02, // Feature (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) 0x85, 0xF3, // Report ID (-13) 0x09, 0xF3, // Usage (0xF3) 0x95, 0x99, // Report Count (-103) 0xB1, 0x02, // Feature (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) 0x85, 0xF4, // Report ID (-12) 0x09, 0xF4, // Usage (0xF4) 0x95, 0x99, // Report Count (-103) 0xB1, 0x02, // Feature (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) 0x85, 0xF5, // Report ID (-11) 0x09, 0xF5, // Usage (0xF5) 0x95, 0x99, // Report Count (-103) 0xB1, 0x02, // Feature (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) 0x85, 0xF6, // Report ID (-10) 0x09, 0xF6, // Usage (0xF6) 0x95, 0x07, // Report Count (7) 0xB1, 0x02, // Feature (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile) 0x85, 0xF7, // Report ID (-9) 0x09, 0xF7, // Usage (0xF7) 0x75, 0x08, // Report Size (8) 0x95, 0x1F, // Report Count (31) 0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position) 0xC0, // End Collection

Dove in and upgraded two Macs today to beta 1. Unfortunately, it appears L2TP VPN is broken or something changed in the way it works. I can longer get a connection to any VPN concentrator I used previously. I tested with Cisco Anyconnect SSL VPN client and can connect to the same concentrators (as they're configured to accept L2TP or SSL clients). I also tested from my phone running iOS 16 beta and it still works for the L2TP connections. The Mac not working with L2TP VPN ppp.log shows this Fri Jun 10 19:18:52 2022 : L2TP connecting to server 'IP removed' (IP removed)... Fri Jun 10 19:18:52 2022 : IPSec connection started Fri Jun 10 19:18:52 2022 : IPSec phase 1 client started Fri Jun 10 19:19:02 2022 : IPSec connection failed Connecting a Mac successfully on 12.4 the log shows Fri Jun 10 19:12:33 2022 : L2TP connecting to server 'IP removed' (IP removed)... Fri Jun 10 19:12:33 2022 : IPSec connection started Fri Jun 10 19:12:33 2022 : IPSec phase 1 client started Fri Jun 10 19:12:33 2022 : IPSec phase 1 server replied Fri Jun 10 19:12:34 2022 : IPSec phase 2 started Fri Jun 10 19:12:34 2022 : IPSec phase 2 established Fri Jun 10 19:12:34 2022 : IPSec connection established (and then a ton more lines of the entire process ending with client getting an IP that I won't bother posting) VPN wasn't high on my list of apps I was concerned about breaking with the beta. But, now that it is broke and I need it for work I'm kinda screwed myself. Anyway, if anyone knows a way to fix this please let me know.