Steps To reproduce: Login to application and App has joined the PTC channel. Push the application to background and Lock the device. From the System UI press the talk button which will start transmit. Audio Session has been activated and Audio unit has been initialised properly. On terminator side no media is being played out. Issue observed consistently on specific models which has configured audio codec with Stereo type. More details are added : FB20281626

I want to create a brush similar to a fountain pen, with a three-dimensional feel to the strokes and a distinct tip. Alternatively, is it possible to achieve this by modifying the configuration parameters of a fountain pen brush?

Hello, I have noticed that the ShieldConfiguration is only requested when opening a target app, and never when the application token is moved to a different shield while the target app remains in foreground. This causes problems because many times the wrong ShieldConfiguration is displayed (recycled) instead of requesting a new ShieldConfiguration. This bug has been around since the introduction of the Screen Time API in 2020 and is has not been addressed. Bug reports: FB14237883 FB17902392 Please fix asap!! Not acceptable to have bugs not being addressed for more than 5 years. Most concerning: This is still reproducing on iOS 26 beta 7!! Thanks a lot for your help.

Hi everyone, We came an issue that, In some scenarios in our app we cannot fetch any resources from device (Photo and Contact). One case we catched is putting app in background and spending time in other commonly used apps and coming back to our app cause this issue but there is a small chance that get this issue during using the application. In cell, we are trying to fetch the image like this imageFetchTask = Task { let image = await CompositionRoot.shared.photosManager.image(requestType: .imageCollections, forId: photoAsset.photoId) self.photoImageView.image(image) } and inner layers of this code we get the PHAsset and request image PHAsset.firstAsset(for: id) let manager = PHImageManager.default() manager.requestImage(for: asset, targetSize: request.targetSize, contentMode: .aspectFill, options: request.options) { (image, info) in continuation.resume(returning: image) } We figured out that issue not happening only in Photos also Contacts and any web request. So any help according to this situation is well appreciated. Thanks

When fetching Apple Savings transactions via FinanceKit, the data is missing key context about where the deposit originated from. Here’s an example transaction I retrieved: Transaction( id: 77371A0C-7122-42C7-BEBC-85BDF654AD2B, accountID: 68D9FE9D-6DA6-4A27-BB9D-19209CD29A56, transactionAmount: 1.46 USD, creditDebitIndicator: .credit, transactionDescription: "Deposit", originalTransactionDescription: "", merchantCategoryCode: nil, merchantName: nil, transactionType: .deposit, status: .booked, transactionDate: 2025-08-20 13:44:26 +0000, postedDate: 2025-08-20 13:44:26 +0000 ) As shown: transactionDescription is just "Deposit" merchantName is nil No indication of the source account In contrast, the Wallet app clearly shows context for Apple Savings account deposits, such as: "Apple Card" (daily cash) "Bank of America" (external transfer) "Interest Paid" (we do see "Interest" come through correctly) Without this metadata, third-party apps cannot replicate Wallet’s clarity about where a deposit came from. Every deposit simply appears as "Deposit", which is ambiguous. Request: Please expose additional metadata for Apple Savings account transactions, for example: sourceAccountName (e.g. “Apple Card” or “Bank of America”) transactionOriginType (cashback, external bank transfer, interest) institutionIdentifier or similar for external banks This would allow developers to show clear, Wallet-quality transaction details and avoid confusing users. Impact: The lack of source info makes Savings deposits nearly indistinguishable from one another, even though Wallet provides this context. For apps leveraging FinanceKit, this results in a poorer experience compared to Apple’s own Wallet. Thanks!

I have a UIApplicationDelegate, where I want to terminate a live activity (in dynamic island) in applicationWillTerminate. However, ending an activity is asynchronous. When I end it within a Task, it's never called.

I'm using the new AlarmKit framework to build a Swift app that lets users schedule multiple repeating alarms. The goal is to allow users to stop all alarms for today if they wake up early, but the alarms should still ring on their scheduled days in the future (for example, every Monday). What I tried: When the user chooses to stop alarms for today, I delete all alarms and re-add them. However, this doesn't work as expected. If today is Monday and I delete and re-add the alarm with .weekday = .monday, it still rings today. That means re-adding the alarm doesn't skip today's instance, even though it's repeating. What I want to achieve: Skip or suppress today's alarms when the user stops them manually Keep the same alarms active for their scheduled days in the future Questions: Is there a way in AlarmKit to prevent a repeating alarm from ringing today if it was just re-added or there are better alternatives to this problem? Is the only workaround to delay re-adding until after today’s alarms would have fired? What is the best approach to achieve this?

We developing an app, It's a Parental control app required to block large number of apps. In child mobile installed more than 200 apps parent has to block and disable these apps but parent cant able to block more than 50 apps. Is there any option is there to block all the 200 apps from child mobile.

Some Apple URL schemes are documented for third-party use. It’s fine to use those URL schemes for their intended purpose. Other Apple URL schemes are not officially documented. Their use is unsupported. If you rely on such implementation details, things might work, or they might not, and that state might change over time. IMPORTANT If you ship via the App Store, pay attention to clause 2.5.1 of the App Review Guidelines. The Apple URL scheme documentation is not always easy to find. I’m aware of the following: Apple URL Scheme Reference QA1924 Opening Keyboard Settings from a Keyboard Extension [This Q&A was retired years ago.] Preparing your app to be the default messaging app The doc comments for es_new_client in <EndpointSecurity/ESClient.h> Developer > Bug Reporting describes the applefeedback scheme Additionally, as questions about this most commonly crop up in the context of opening Settings (System Settings on macOS), I wanted to highlight the following: UIApplication.openSettingsURLString property (in Objective-C this is UIApplicationOpenSettingsURLString) UIApplication.openNotificationSettingsURLString property (in Objective-C this is UIApplicationOpenNotificationSettingsURLString) UIApplication.openDefaultApplicationsSettingsURLString property (in Objective-C this is UIApplicationOpenDefaultApplicationsSettingsURLString) AccessibilitySettings.openSettings(for:) method FIFinderSyncController.showExtensionManagementInterface() class method SMAppService.openSystemSettingsLoginItems() class method VSOpenTVProviderSettingsURLString global CXCallDirectoryManager.openSettings(completionHandler:) method If your app needs to perform some action that’s not covered by the above, file an enhancement request for a supported way to do that. Make sure to describes your use case in detail. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com" Revision History 2025-10-28 Added a reference to UIApplication.openDefaultApplicationsSettingsURLString. Made other minor editorial changes. 2025-04-21 Added a reference to CXCallDirectoryManager.openSettings(completionHandler:). 2024-10-25 Added a reference to UIApplication.openNotificationSettingsURLString and VSOpenTVProviderSettingsURLString. Added a link to Preparing your app to be the default messaging app. 2024-10-01 Added info about the applefeedback URL scheme. 2024-09-29 Added a reference to SMAppService.openSystemSettingsLoginItems(). 2024-09-27 Added a titbit for Finder Sync extension developers. Added an invitation to file feedback. 2024-08-05 First posted.

I experimented a lot with Live Caller ID when it first appeared with iOS 18 Beta. Now I'm starting to pick it up again and have immediately noticed some detrimental differences between the behavior observed when it was in beta status to how it currently behaves with iOS 18.3. The main difference is caching - if a call is made and data from a live call id lookup displayed on the call screen, then if the call is made again immediately then that data is re-fetched from the server. And it takes a long time too, about 5 or 6 seconds before the data is displayed in the call screen (with the beta it took about 3 seconds). In the data set cache_expiry_minutes is set to 50, yet it's not being honored, there's no caching occurring at all. Yet this did used to occur several months ago when the feature was in beta. What's happened to caching, why is it no longer working when it used to? Another change is there used to be a notification displayed when a call was blocked, this no longer is displayed. Is this an intentional change or a bug?

At WWDC25 we launched a new type of Lab event for the developer community - Group Labs. A Group Lab is a panel Q&A designed for a large audience of developers. Group Labs are a unique opportunity for the community to submit questions directly to a panel of Apple engineers and designers. Here are the highlights from the WWDC25 Group Lab for watchOS (part 2). 7. For widget (complication) update budgets, is there an overall budget or are scheduled update separate from APNS updates? For context I have a complication that is updated on a fixed schedule (every 20 min), but there can be times of the day that are more "interesting" where pushes make sense. Like timeline updates, the system budgets WidgetKit push notifications and delivers them opportunistically. You can use WidgetKit push notification updates as an addition to timeline updates. For more information, see Updating widgets with WidgetKit push notifications. 8. It seems like the new Control Center widgets can be sourced from either the iPhone or directly on the Watch. Can we control whether a control appears in the watch list, or will it always be a combination of all controls from both sources? iPhone controls will be automatically available on the companion Apple Watch, even if they don’t have an associated watchOS app. When an iPhone control is tapped on the Apple Watch, the action is performed on the iPhone. Controls whose actions foreground the iOS app will not appear on Apple Watch. If a watchOS app has controls, no controls will appear on Apple Watch from the companion iOS app. 9. From UI/UX perspective, what are the current practices for Designing watchOS apps that feels native. The WWDC23 session Design and build apps for WatchOS 10 covers the details of watchOS design principles and how to apply them in your app using SwiftUI. A lot of SwiftUI APIs, such as NavigationSplitView, vertical tab view, list view, and etc, already implement the look and feel native to watchOS. 10. When adopting the new design system on watchOS, it seems like the main place we will use the glass effect is for our buttons in toolbar? Standard buttons in system apps seem to continue to use a flat appearance and full width. We leave the choice to you – You can use the new GlassButtonStyle API or .buttonStyle(.glass) to apply the liquid glass material to buttons. Learn when to use the Liquid Glass styles in Get to know the new design system. 11. Is there any way to gracefully migrate extensions when their bundleIDs have to change? e.g., converting a multi-target watch app to single-target, which drops the .watchkitextension from both the app and WidgetKit ext bundleIDs Updating a watchOS app to single-target is covered in TechNote TN3157: Updating your watchOS project for SwiftUI and WidgetKit. Xcode provides a tool that can do the update automatically, and the technote describes the details about how to use it and how to clean up the project after the automatic update. If there's something that technote doesn't address, please reach out to us on the Developer Forums. 12. What is the status of WatchConnectivity? Is that still the preferred way for iOS + watchOS communications? The Watch Connectivity framework is still supported, and is appropriate for the communication between an watchOS app and its companion iOS app. The systems also provide other APIs for the apps to exchange data. For example, watchOS supports Apple Push Notification service (APNs). If data for your widget changes on your server, your widget can receive a WidgetKit push notification, and update accordingly. That’s the preferred mechanism for widget updates.

I have an App Intent that returns a MyEntity value with the following properties: struct MyEntity: AppEntity { @Property(title: "Title") var title: String? @Property(title: "Image") var image: IntentFile? } I created a Shortcut that takes the output value of this intent and passes it as the input to the Send Message action. When I tap the MyEntity parameter in the message action, it shows to be of Type MyEntity. Below that, I can select 1 of 3 options: MyEntity, Title, or Image. When I run the shortcut, a new message compose window appears with the following behavior depending on the selected option: MyEntity - the message draft is empty Title - the message draft shows the title string Image - the message draft shows the image My expected and desired result when MyEntity is selected would be a message draft populated with the image and the title string as text. How would I achieve this? Is it possible? I've experimented with conforming MyEntity to Transferable. That's enabled use cases such as passing the MyEntity input as Type Image for example. Do I need to create a custom UTType to represent MyEntity, or is that unrelated to my issue? I haven't explored this yet but seems potentially related!

At WWDC25 we launched a new type of Lab event for the developer community - Group Labs. A Group Lab is a panel Q&A designed for a large audience of developers. Group Labs are a unique opportunity for the community to submit questions directly to a panel of Apple engineers and designers. Here are the highlights from the WWDC25 Group Lab for watchOS (part 1). 1. I'm really excited about the new design system on all platforms. Liquid Glass is super cool. What do developers need to keep in mind when building for watchOS 26? To adopt the new design system, start with updating your app for watchOS 10 – If you have done so, your app will be mostly ready for watchOS 26. For more information, see Design and build apps for WatchOS 10. You can then look into Liquid Glass specific APIs to fine tune your app. This topic is covered in Adopting Liquid Glass. If you have SwiftUI views using any custom style, make sure they are still legible and fit with the new design system. 2. Something that really stood out to me were updates to the Smart Stack, with the system prioritizing Widgets when they're most relevant. Tell me more about these new opportunities for apps. Workout apps that record workouts using HealthKit may be automatically suggested on the watch face and appear in the Smart Stack without adding a widget. Relevant widgets are a great way to present information related to a date, location, point-of-interest type, sleep schedule, or fitness condition in the Smart Stack when it is relevant. Relevant widgets don't need to display a empty state view when they are not relevant. They are only shown in the Smart Stack when relevant. The watchOS 26 Design ToolKit in the Apple Design Resources includes a set of templates that you can use to layout your widgets. 3. Is the Wrist Flick gesture available to developers in the same way as Double Tap is? The system uses Wrist Flick to dismiss notifications and incoming calls, silence timers and alarms, or return to the watch face. There is no separate API for the Wrist Flick gesture. Apps that are using XCUIAutomation to make sure their user interface behaves as intended can use the XCUIDeviceHandGesture.flick to automate tests that verify that their app responds appropriately to the Wrist Flick gesture. For apps using automated testing, the XCUIDeviceHandGesture.doubleTap can be also be used to automate testing of the app with the Double Tap gesture. See XCUIDevice.perform(handGesture:) 4. Can HRV measurements be triggered on demand via API in watchOS? Guidelines or processes for enabling energy-intensive biometric sampling on development devices for IRB-approved research? You don’t have direct control on the sampling rate in watchOS. You can use HealthKit (HKQuantityTypeIdentifierHeartRateVariabilitySDNN, to be specific) to query the HRV data, once the system has sampled and persisted the data to HealthKit. If that doesn’t help, we suggest that you file a feedback report with your concrete use case for us to investigate. Specific to IRB-approved research using Apple Watch or its companion iPhone, you might want to look at this FAQ and SensorKit to see if they can be of any help. 5. What is the best advice for someone who is new to making a watchOS app that’s been on iOS and iPadOS? You can start with exploring the system experience features on watchOS, such as notifications, controls, and widgets, and getting familiar with the system spaces, like Smart Stack, watch face, and control center. Knowing the watchOS app design principles and practices is important as well. Design and build apps for WatchOS 10 is a great resource for this topic. SwiftUI is an amazing across-platform framework, and you will use it to create your watchOS app. If you're already using it, great! Keep in mind some watch-only constraints. Comparing to iPhone or iPad, Apple Watch has a limited battery and smaller screen size, which significantly impacts how people use your app and how your app works. 6. Was there any extension this year to the 7 day limit on querying Apple Health data on the watch? There is no change on the limit this year. You can get this official limit at runtime using earliestPermittedSampleDate. There are some exceptions, and so don't be surprised if you see some data types are retained longer. The companion iPhone holds the full set of the health data. If you need to access the health data that has been purged from the Apple Watch, consider doing it with your iOS app, and then passing the result to your watchOS app.

Hi, My app is going to consist of 2-3 pages of weather data. Do I have to add the Apple Weather logo to each page, or just the main one? Thanks, Dan Uff

Environment: macOS 15.2 (24C101) with Xcode 16.2 (16C5032a) Goal: I am trying to build a simple IMKInputController-based input method. Problem: My .app bundle registers successfully and I can select it as an input source. When selected, it blocks keyboard input, but my handle method does not seem to execute or produce output. I have placed NSLog statements in my controller's init and handle methods. Code for the controller: import InputMethodKit // The IMKTextInput protocol is provided by the framework. // We don't need to define our own bridging protocol for this test. public class HelloWorldController: IMKInputController { public override init!(server: IMKServer!, delegate: Any!, client inputClient: Any!) { super.init(server: server, delegate: delegate, client: inputClient) NSLog("HelloWorldIME: Controller has been initialized.") } public override func handle(_ event: NSEvent!, client sender: Any!) -> Bool { NSLog("HelloWorldIME: handle() method was called.") // ================== FINAL FIX APPLIED HERE ================== // 1. First, we ensure the client is a fundamental Objective-C object. guard let clientObject = sender as? NSObject else { NSLog("HelloWorldIME: Error - client object is not an NSObject.") return false } NSLog("HelloWorldIME: Successfully cast client to NSObject.") // 2. Now that we have an NSObject, we can safely check if it responds to the selector. let selector = #selector(IMKTextInput.insertText(_:replacementRange:)) if !clientObject.responds(to: selector) { NSLog("HelloWorldIME: Error - client object does not respond to the insertText selector.") return false } NSLog("HelloWorldIME: Client responds to insertText. Preparing to insert text.") // 3. Since we've confirmed it responds, we can now safely treat it as an IMKTextInput // and call the method. let client = clientObject as! IMKTextInput let stringToInsert = "A" let replacementRange = NSRange(location: NSNotFound, length: 0) client.insertText(stringToInsert, replacementRange: replacementRange) NSLog("HelloWorldIME: Called insertText with string '\(stringToInsert)'. Action complete.") // ======================================================== return true } }

How can I use the Screen Time API to set a restriction for a child account from my app running on the parent’s account?

Hi all, I'm trying to set up universal links for my app but it's not working. What I want: cogover.com → Safari (website) - NOT my app *.cogover.com (any subdomain like abc.cogover.com) → My app What I did: Added applinks:*.cogover.com in Xcode Put AASA files on all subdomains They work fine (checked with curl) Problem: All links still open in Safari, not my app. I do not put AASA on my root domain cogover.com because I don't want open my app with root domain. I have checked TN3155: Debugging universal links | Apple Developer Documentation but it only say about universal link works with both root domain and subdomains. Weird thing I found: I checked how Salesforce does it - their *.force.com subdomains work perfectly. But when I tried to check their setup, (https://force.com/.well-known/apple-app-site-association) doesn't seem to exist either! So how does theirs work? Even stranger - Apple's CDN has their file cached at (https://app-site-association.cdn-apple.com/a/v1/force.com) but the actual domain doesn't serve it. Can Apple's CDN have a file cached even if it's not on the website anymore? Thanks for any help!

At present, all my apps cannot display normally

My use case is a Repeat Timer app. The user can configure a repeating timer, say: 8 minutes with 3 sets So I would like to configure either 3 alarms (8mins, 16mins, 24mins) or a repeating alarm (8mins every 3 mins) BUT... I would like the first and second alarms to break through but only for 5 seconds for example, and then stop (so the user doesn't need to tap the screen to silence the alarm). I don't think this is possible after reading the API docs, but am asking the question anyway. Thanks for any advice or guidance here, and happy WWDC!

When I open Iplaytv on my Apple TV it says refresh needed but I don’t know how