At WWDC25 we launched a new type of Lab event for the developer community - Group Labs. A Group Lab is a panel Q&A designed for a large audience of developers. Group Labs are a unique opportunity for the community to submit questions directly to a panel of Apple engineers and designers. Here are the highlights from the WWDC25 Group Lab for watchOS (part 1). 1. I'm really excited about the new design system on all platforms. Liquid Glass is super cool. What do developers need to keep in mind when building for watchOS 26? To adopt the new design system, start with updating your app for watchOS 10 – If you have done so, your app will be mostly ready for watchOS 26. For more information, see Design and build apps for WatchOS 10. You can then look into Liquid Glass specific APIs to fine tune your app. This topic is covered in Adopting Liquid Glass. If you have SwiftUI views using any custom style, make sure they are still legible and fit with the new design system. 2. Something that really stood out to me were updates to the Smart Stack, with the system prioritizing Widgets when they're most relevant. Tell me more about these new opportunities for apps. Workout apps that record workouts using HealthKit may be automatically suggested on the watch face and appear in the Smart Stack without adding a widget. Relevant widgets are a great way to present information related to a date, location, point-of-interest type, sleep schedule, or fitness condition in the Smart Stack when it is relevant. Relevant widgets don't need to display a empty state view when they are not relevant. They are only shown in the Smart Stack when relevant. The watchOS 26 Design ToolKit in the Apple Design Resources includes a set of templates that you can use to layout your widgets. 3. Is the Wrist Flick gesture available to developers in the same way as Double Tap is? The system uses Wrist Flick to dismiss notifications and incoming calls, silence timers and alarms, or return to the watch face. There is no separate API for the Wrist Flick gesture. Apps that are using XCUIAutomation to make sure their user interface behaves as intended can use the XCUIDeviceHandGesture.flick to automate tests that verify that their app responds appropriately to the Wrist Flick gesture. For apps using automated testing, the XCUIDeviceHandGesture.doubleTap can be also be used to automate testing of the app with the Double Tap gesture. See XCUIDevice.perform(handGesture:) 4. Can HRV measurements be triggered on demand via API in watchOS? Guidelines or processes for enabling energy-intensive biometric sampling on development devices for IRB-approved research? You don’t have direct control on the sampling rate in watchOS. You can use HealthKit (HKQuantityTypeIdentifierHeartRateVariabilitySDNN, to be specific) to query the HRV data, once the system has sampled and persisted the data to HealthKit. If that doesn’t help, we suggest that you file a feedback report with your concrete use case for us to investigate. Specific to IRB-approved research using Apple Watch or its companion iPhone, you might want to look at this FAQ and SensorKit to see if they can be of any help. 5. What is the best advice for someone who is new to making a watchOS app that’s been on iOS and iPadOS? You can start with exploring the system experience features on watchOS, such as notifications, controls, and widgets, and getting familiar with the system spaces, like Smart Stack, watch face, and control center. Knowing the watchOS app design principles and practices is important as well. Design and build apps for WatchOS 10 is a great resource for this topic. SwiftUI is an amazing across-platform framework, and you will use it to create your watchOS app. If you're already using it, great! Keep in mind some watch-only constraints. Comparing to iPhone or iPad, Apple Watch has a limited battery and smaller screen size, which significantly impacts how people use your app and how your app works. 6. Was there any extension this year to the 7 day limit on querying Apple Health data on the watch? There is no change on the limit this year. You can get this official limit at runtime using earliestPermittedSampleDate. There are some exceptions, and so don't be surprised if you see some data types are retained longer. The companion iPhone holds the full set of the health data. If you need to access the health data that has been purged from the Apple Watch, consider doing it with your iOS app, and then passing the result to your watchOS app.

At WWDC25 we launched a new type of Lab event for the developer community - Group Labs. A Group Lab is a panel Q&A designed for a large audience of developers. Group Labs are a unique opportunity for the community to submit questions directly to a panel of Apple engineers and designers. Here are the highlights from the WWDC25 Group Lab for watchOS (part 2). 7. For widget (complication) update budgets, is there an overall budget or are scheduled update separate from APNS updates? For context I have a complication that is updated on a fixed schedule (every 20 min), but there can be times of the day that are more "interesting" where pushes make sense. Like timeline updates, the system budgets WidgetKit push notifications and delivers them opportunistically. You can use WidgetKit push notification updates as an addition to timeline updates. For more information, see Updating widgets with WidgetKit push notifications. 8. It seems like the new Control Center widgets can be sourced from either the iPhone or directly on the Watch. Can we control whether a control appears in the watch list, or will it always be a combination of all controls from both sources? iPhone controls will be automatically available on the companion Apple Watch, even if they don’t have an associated watchOS app. When an iPhone control is tapped on the Apple Watch, the action is performed on the iPhone. Controls whose actions foreground the iOS app will not appear on Apple Watch. If a watchOS app has controls, no controls will appear on Apple Watch from the companion iOS app. 9. From UI/UX perspective, what are the current practices for Designing watchOS apps that feels native. The WWDC23 session Design and build apps for WatchOS 10 covers the details of watchOS design principles and how to apply them in your app using SwiftUI. A lot of SwiftUI APIs, such as NavigationSplitView, vertical tab view, list view, and etc, already implement the look and feel native to watchOS. 10. When adopting the new design system on watchOS, it seems like the main place we will use the glass effect is for our buttons in toolbar? Standard buttons in system apps seem to continue to use a flat appearance and full width. We leave the choice to you – You can use the new GlassButtonStyle API or .buttonStyle(.glass) to apply the liquid glass material to buttons. Learn when to use the Liquid Glass styles in Get to know the new design system. 11. Is there any way to gracefully migrate extensions when their bundleIDs have to change? e.g., converting a multi-target watch app to single-target, which drops the .watchkitextension from both the app and WidgetKit ext bundleIDs Updating a watchOS app to single-target is covered in TechNote TN3157: Updating your watchOS project for SwiftUI and WidgetKit. Xcode provides a tool that can do the update automatically, and the technote describes the details about how to use it and how to clean up the project after the automatic update. If there's something that technote doesn't address, please reach out to us on the Developer Forums. 12. What is the status of WatchConnectivity? Is that still the preferred way for iOS + watchOS communications? The Watch Connectivity framework is still supported, and is appropriate for the communication between an watchOS app and its companion iOS app. The systems also provide other APIs for the apps to exchange data. For example, watchOS supports Apple Push Notification service (APNs). If data for your widget changes on your server, your widget can receive a WidgetKit push notification, and update accordingly. That’s the preferred mechanism for widget updates.

On a device with approx 800 contacts, the sheet presented when tapping ContactAccessButton with multiple matches briefly appears (.25 seconds) before disappearing, leaving the view below in a dimmed, slightly zoomed out, non-interactive state as if a sheet were being presented. Swiping down dismisses the invisible sheet returns the underlying view to a normal state. Is there a way to avoid this? It appears possibly similar to https://developer.apple.com/forums/thread/762077 Logs (exact duplicates removed) #ContactsButton response after touch -- Should show UI LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Error returned from iconservicesagent image request: <ISBundleIdentifierIcon: 0x11c0378c0> BundleID: (null) digest: 7749FEEE-F663-39B4-AD68-A18CFF762CCC - <ISImageDescriptor: 0x111cfeb20> - (64.00, 64.00)@2x v:4 l:5 a:0:0:0:0 t:() b:0 s:2 ps:0 digest: DF83A970-D4C9-3D90-BB7D-0BC21FC22E03 error: Error Domain=NSOSStatusErrorDomain Code=-609 "Client is disallowed from making such an icon request" UserInfo={NSLocalizedDescription=Client is disallowed from making such an icon request} Error returned from iconservicesagent image request: <ISTypeIcon: 0x11c055d10>,Type: com.apple.appprotection.badge.faceid - <ISImageDescriptor: 0x111cfdfe0> - (32.00, 32.00)@3x v:0 l:5 a:0:0:0:0 t:() b:0 s:2 ps:0 digest: E988236A-DCCF-30CB-83D0-D901CB1A5499 error: Error Domain=NSOSStatusErrorDomain Code=-609 "Client is disallowed from making such an icon request" UserInfo={NSLocalizedDescription=Client is disallowed from making such an icon request} Error returned from iconservicesagent image request: <ISBundleIdentifierIcon: 0x11c037840> BundleID: (null) digest: 7749FEEE-F663-39B4-AD68-A18CFF762CCC - <ISImageDescriptor: 0x111cfd900> - (64.00, 64.00)@2x v:4 l:5 a:0:0:0:0 t:() b:0 s:2 ps:0 digest: DF83A970-D4C9-3D90-BB7D-0BC21FC22E03 error: Error Domain=NSOSStatusErrorDomain Code=-609 "Client is disallowed from making such an icon request" UserInfo={NSLocalizedDescription=Client is disallowed from making such an icon request} -[RTIInputSystemClient remoteTextInputSessionWithID:performInputOperation:] perform input operation requires a valid sessionID. inputModality = Keyboard, inputOperation = <null selector>, customInfoType = UIEmojiSearchOperations [C:6] Error received: Connection interrupted. VS terminated with error: Error Domain=_UIViewServiceInterfaceErrorDomain Code=3 "(null)" UserInfo={Message=Service Connection Interrupted} -[RTIInputSystemClient remoteTextInputSessionWithID:performInputOperation:] perform input operation requires a valid sessionID. inputModality = Keyboard, inputOperation = <null selector>, customInfoType = UIEmojiSearchOperations Error returned from iconservicesagent image request: <ISBundleIdentifierIcon: 0x117fb3440> BundleID: (null) digest: 7749FEEE-F663-39B4-AD68-A18CFF762CCC - <ISImageDescriptor: 0x117efe120> - (64.00, 64.00)@2x v:4 l:5 a:0:0:0:0 t:() b:0 s:2 ps:0 digest: DF83A970-D4C9-3D90-BB7D-0BC21FC22E03 error: Error Domain=NSOSStatusErrorDomain Code=-609 "Client is disallowed from making such an icon request" UserInfo={NSLocalizedDescription=Client is disallowed from making such an icon request} Error returned from iconservicesagent image request: <ISTypeIcon: 0x117decd50>,Type: com.apple.appprotection.badge.faceid - <ISImageDescriptor: 0x117efd400> - (32.00, 32.00)@3x v:0 l:5 a:0:0:0:0 t:() b:0 s:2 ps:0 digest: E988236A-DCCF-30CB-83D0-D901CB1A5499 error: Error Domain=NSOSStatusErrorDomain Code=-609 "Client is disallowed from making such an icon request" UserInfo={NSLocalizedDescription=Client is disallowed from making such an icon request} Error returned from iconservicesagent image request: <ISBundleIdentifierIcon: 0x117fb2200> BundleID: (null) digest: 7749FEEE-F663-39B4-AD68-A18CFF762CCC - <ISImageDescriptor: 0x117effa20> - (64.00, 64.00)@2x v:4 l:5 a:0:0:0:0 t:() b:0 s:2 ps:0 digest: DF83A970-D4C9-3D90-BB7D-0BC21FC22E03 error: Error Domain=NSOSStatusErrorDomain Code=-609 "Client is disallowed from making such an icon request" UserInfo={NSLocalizedDescription=Client is disallowed from making such an icon request} -[RTIInputSystemClient remoteTextInputSessionWithID:performInputOperation:] perform input operation requires a valid sessionID. inputModality = Keyboard, inputOperation = <null selector>, customInfoType = UIEmojiSearchOperations [C:6] Error received: Connection interrupted. VS terminated with error: Error Domain=_UIViewServiceInterfaceErrorDomain Code=3 "(null)" UserInfo={Message=Service Connection Interrupted} -[RTIInputSystemClient remoteTextInputSessionWithID:performInputOperation:] perform input operation requires a valid sessionID. inputModality = Keyboard, inputOperation = <null selector>, customInfoType = UIEmojiSearchOperations

我完全复用了官方wwdc的Alarmkit的demo。测试过程发现12，13pro闹钟完全正常，15pro和16pro闹铃时间不对，经常不响，而且在设置中切换市时区时会立马响。这是api的bug么

I'm sitting at my house and trying to sign my test device out of my apple ID so I can sign into a Sandbox user, but now I have an hour to kill because of this terribly broken "security" feature that thinks it's in an unfamiliar location, despite being at the only location it's ever known. Looks like I'll just be disabling this feature all together. Especially as a device with Developer Mode enabled, which gets reset regularly, there should be additional options here. Come on!

Hey folks! I'm working on a macOS app which has a Finder Quick Action extension. It's all working fine, but I'm hitting a weird struggle with getting the icon rendering how I would like, and the docs haven't been able to help me. I want to re-use a custom SF Symbol from my app, so I've copied that from the main app's xcassets bundle to the one in the extension, and configured it for Template rendering. The icon renders in the right click menu in Finder, the Finder preview pane and the Extensions section of System Settings, but all of them render with the wrong colour in dark mode. In light mode they look fine, but in dark mode I would expect a templated icon to be rendered in white, not black. I've attached a variety of screenshots of the icons in the UI and how things are set up in Xcode (both for the symbol in the xcassets bundle, and the Info.plist) I tried reading the docs, searching Google, searching GitHub and even asking the dreaded AI, but it seems like there's not really very much information available about doing icons for Finder extensions, especially ones using a custom SF Symbol, so I would love to know if anyone here has been able to solve this in the past! Finder preview pane in light mode: Finder preview pane in dark mode: Finder quick action context menu: System Settings extension preferences: The custom symbol in my .xcassets bundle: The finder extension's Info.plist:

Hello Apple Developers, I’m developing an iOS app that requires access to the user’s contacts. I understand that starting from iOS 14, Apple introduced two levels of contact permissions: 1️⃣ Full Access – The app can read all contacts. 2️⃣ Limited Access – The app can only access contacts selected by the user. My Question: If a user initially grants Limited Access, is it allowed by Apple’s guidelines to request Full Access later? 🔹 I understand that re-requesting permission immediately after the user denies it is against Apple’s policies. 🔹 However, if the user has already granted Limited Access, and we first show an explanation modal explaining why Full Access is beneficial, can we then prompt them to change their settings via openAppSettings()? 🔹 Alternatively, can we use Permission.contacts.request() again to re-prompt the user for Full Access, or will iOS prevent the permission prompt from appearing again? How We Handle This in the App: 1️⃣ If a user selects Limited Access, we respect their choice and only access their selected contacts. 2️⃣ Later, if Full Access is necessary for an enhanced experience, we display a clear explanation modal explaining why the app needs Full Access. 3️⃣ If the user agrees, we attempt to guide them to openAppSettings(), allowing them to manually change the permission. 4️⃣ However, if Permission.contacts.request() can be used to directly request Full Access again, we would like to know if this is acceptable. We want to ensure that our implementation follows Apple’s privacy guidelines while providing the best user experience. Any official guidance or best practices on this matter would be greatly appreciated. Thank you in advance!

Hi, My app is going to consist of 2-3 pages of weather data. Do I have to add the Apple Weather logo to each page, or just the main one? Thanks, Dan Uff

we’re looking to get some clarification around how the hourly forecasts should be interpreted to ensure we’re using your data in the correct manner. If you could provide the answers to the following questions would be extremely helpful: 1. What do the data points (e.g temperature) in the hourly forecast represent for a future hour? Do they represent the expected average over that future hour or do they represent the forecast for the point in time at the top of the hour? 2. What do those same data points represent in the hourly forecast for an hour which has already begun? e.g. it’s 8:30 and we pull the hourly forecast and the 8:00 hour is still returned. Which of the following would be the correct interpretation for the values returned for the 8:00 hour: The values represent the forecast for the point in time at the top of the 8:00 hour (if this is the case we would expect it to stop updating) The values represent the current forecast i.e. what the weather is right now The values represent the average over the remaining portion of the 8:00 hour The values represent the average over the full 8:00 hour including both the portion which has already elapsed and the portion which is still to come 3. What does the data represent after the hour (i.e. looking at historical hours)? Is it: The last forecast made within the hour? If so, is that point-in-time or average for the hour (as explained above)? The actual weather for that hour (using some non-forecast measure of real weather)? If so, again is that point-in-time at top of hour / point-in-time at end of hour / average over the hour?

Hi everyone, I’m working with the ManagedSettingsStore API for managing Screen Time restrictions and I have a specific question: Is it possible for an app to block itself using ManagedSettingsStore() — for example, by applying an application category restriction or setting a specific block on its own bundle ID? If so, what strategies or best practices are recommended to avoid accidentally blocking the app itself while applying restrictions to other apps or categories? I haven’t found any official documentation confirming whether the system prevents self-blocking automatically or if this is something developers need to manage explicitly. Thanks for any clarification or advice you can provide!

Hi! We are having a hard time with the universal link, help is appreciated! Thanks in advance! The universal link doesn't work after installation for some time. A user has to wait for from 5 to a couple of hours after the app is installed on the device. This has also affected App reviewers since we need the universal link to work for successful login. Each submission will receive a rejection of we cannot login and it will be approved until we kindly ask them to try again. I believe the JSON is delivered to devices by Apple's CDN system and the fact that it works on most devices most of the time should imply that we have a valid apple-app-site-association setup. So I am really confused about the wait time, which is giving us trouble with app review and a bad user experience

Environment: macOS 15.2 (24C101) with Xcode 16.2 (16C5032a) Goal: I am trying to build a simple IMKInputController-based input method. Problem: My .app bundle registers successfully and I can select it as an input source. When selected, it blocks keyboard input, but my handle method does not seem to execute or produce output. I have placed NSLog statements in my controller's init and handle methods. Code for the controller: import InputMethodKit // The IMKTextInput protocol is provided by the framework. // We don't need to define our own bridging protocol for this test. public class HelloWorldController: IMKInputController { public override init!(server: IMKServer!, delegate: Any!, client inputClient: Any!) { super.init(server: server, delegate: delegate, client: inputClient) NSLog("HelloWorldIME: Controller has been initialized.") } public override func handle(_ event: NSEvent!, client sender: Any!) -> Bool { NSLog("HelloWorldIME: handle() method was called.") // ================== FINAL FIX APPLIED HERE ================== // 1. First, we ensure the client is a fundamental Objective-C object. guard let clientObject = sender as? NSObject else { NSLog("HelloWorldIME: Error - client object is not an NSObject.") return false } NSLog("HelloWorldIME: Successfully cast client to NSObject.") // 2. Now that we have an NSObject, we can safely check if it responds to the selector. let selector = #selector(IMKTextInput.insertText(_:replacementRange:)) if !clientObject.responds(to: selector) { NSLog("HelloWorldIME: Error - client object does not respond to the insertText selector.") return false } NSLog("HelloWorldIME: Client responds to insertText. Preparing to insert text.") // 3. Since we've confirmed it responds, we can now safely treat it as an IMKTextInput // and call the method. let client = clientObject as! IMKTextInput let stringToInsert = "A" let replacementRange = NSRange(location: NSNotFound, length: 0) client.insertText(stringToInsert, replacementRange: replacementRange) NSLog("HelloWorldIME: Called insertText with string '\(stringToInsert)'. Action complete.") // ======================================================== return true } }

Hi, after updating to iOS 26 I'm encountering an issue where the FamilyActivityPicker no longer opens. No errors are shown in the console, it just never shows up. It works fine pre iOS 26. I've never had any issues with the picker showing up until iOS 26. My latest update was rejected because of this issue, but I've changed nothing in the code. Is anyone else experiencing this?

Hello Having trouble getting associated domain to work in our project. It was working when we used Branch, but our company wants to host the domain ourselves. This is a multi-scheme project, using .xcconfig files to define the correct entitlement per Build. The relevant entitlement file has: com.apple.developer.associated-domains applinks:bm.ddcas.ai in the ....{other irrelevant test associated domains....} The project Team and App ID are taken from the Identifiers screen where the Identifier capabilities has 'associated domains' ticked on. I've also checked elsewhere on AppleDeveloper/Connect to be sure. When we used Branch with domain key app links: bmstores.app.link this worked fine. With https://bm.ddcas.ai (our own host) which is publicly available and has an aasa file in both the main directory and /.well-known, typing this in safari or anything just doesn't attempt to link to the App. The iPhone is in developer mode, and using the developer menu associated domains diagnostic tool, typing https://bm.ddcas.ai results in the diagnostic saying 'The url is a Universal Link for the app with identifier **********.***etc (the app is installed on real iPhone 12, iOS 18.6.2 and my Xcode is 16.4) However, it just doesn't work if we type in https://bm.ddcas.ai and results in a Safari message of '400 not found' and the 'nginx' shows. We have read innumerable Apple Dev posts and StackOverflow posts, as well as several step by step 'how to's' online but this just isn't working. The aasa file is at https://bm.ddcas.ai/apple-app-site-association and is setup as follows: { "applinks": { "apps": [], "details": [ { "appID": "{my Team ID}.{my App ID}", "paths": [ "*" ], "components": [ { "/": "/verification", "?": { "verification_code": "[A-Za-z0-9]{6}" }, "comment": "Matches verification code path" } ] } ] } } Our Server guys say the website (bm.ddcas.ai) is public and hosted, it just doesn't have a /verification path as they say it should redirect before reaching that. Also, our Android redirect works using this site, so this appears to be something specific Apple code is looking for. What, please, are we likely to be missing as it does not seem obvious from the Apple documentation or any of the resources I have checked online. Normally we can figure anything out, but getting nowhere here so the help is appreciated.

I'm currently finding it impossible to get a text filtering extension to be invoked when there's an incoming text message. There isn't a problem with the app/extension because this is the same app and code that is already developed, tested, and unchanged since I last observed it working. I know if there's any history of the incoming number being "known" then the extension won't get invoked, and I used to find this no hindrance to testing previously provided that: the incoming number isn't in contacts there's no outgoing messages to that number there's no outgoing phone calls to the number. This always used to work in the past, but not anymore. However, I've ensured the incoming text's number isn't in contacts, in fact I've deleted all the contacts. I've deleted the entire phone history, incoming and outgoing, and I've also searched in messages and made sure there's no interactions with that number. There's logging in the extension so I can see its being invoked when turned on from the settings app, but its not getting invoked when there's a message. The one difference between now and when I used to have no problem with this - the phone now has iOS 18.5 on it. Its as if in iOS 18.5 there ever was any past association with a text number, its not impossible to remove that association. Has there been some known change in 18.5 that would affect this call filtering behavior and not being able to rid of the incoming message caller as being "known" to the phone? Update I completely reset the phone and then I was able to see the the message filter extension being invoked. That's not an ideal situation though. What else needs to be done beyond what I mentioned above in order to get a phone to forget about a message's number and thus get an message filtering extension to be invoked when there's a message from that number?

I need to display a different app name based on the user's region/language. This setup works correctly for regions like the United Kingdom, Australia. However, for Singapore, the app always falls back to the UK version (en-GB) instead of picking the localized name defined under en-SG. Interestingly, system alerts like location permission and app deletion do use the en-SG localization correctly. Could you help identify why the app name isn't picking up the en-SG version and suggest how we can resolve this?

Hello I'm working on Live Caller ID Lookup implementation on my own pet-project, as I understood I need to create app and extension for this app. I also created test PIR-service. I did configure serviceURL, tokenIssuerURL and userTierToken. In My app I implemented following code Task { if LiveCallerIDLookupManager.shared.status(forExtensionWithIdentifier: "some-extension") == .disabled { `//` Show an alert. print("LiveCallerIDLookupManager is disabled") } do { // Open Settings. try await LiveCallerIDLookupManager.shared.openSettings() } catch { } It does open Call settings, but I don't understand what should I do next.

Using Apple SwiftUI Translate library: when calling: try await session.prepareTranslation() the first time, the API's Language Download sheet does not show (or shows briefly and dismisses immediately) Even when the sheet doesn't show, the keyboard is lowered, as though the sheet would be appearing, but then the keyboard raises as though the sheet was dismissed. The following Errors are printed in the console dozens of times; but on all subsequent executions, the API Language Download sheet shows as expected. The trigger code is in a function which is executed when a Translate button is tapped. Any ideas would be welcome! Console Error on first execution only LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} LaunchServices: store (null) or url (null) was nil: Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Attempt to map database failed: permission was denied. This attempt will not be retried. Failed to initialize client context with error Error Domain=NSOSStatusErrorDomain Code=-54 "process may not map database" UserInfo={NSDebugDescription=process may not map database, _LSLine=72, _LSFunction=_LSServer_GetServerStoreForConnectionWithCompletionHandler} Error returned from iconservicesagent image request: <ISBundleIdentifierIcon: 0x300df3c30> BundleID: (null) digest: 7749FEEE-F663-39B4-AD68-A18CFF762CCC - <ISImageDescriptor: 0x3033b26c0> - (64.00, 64.00)@2x v:4 l:5 a:0:0:0:0 t:() b:0 s:2 ps:0 digest: DF83A970-D4C9-3D90-BB7D-0BC21FC22E03 error: Error Domain=NSOSStatusErrorDomain Code=-609 "Client is disallowed from making such an icon request" UserInfo={NSLocalizedDescription=Client is disallowed from making such an icon request} Error returned from iconservicesagent image request: <ISTypeIcon: 0x300d0fb70>,Type: com.apple.appprotection.badge.faceid - <ISImageDescriptor: 0x3033ad0e0> - (32.00, 32.00)@2x v:0 l:5 a:0:0:0:0 t:() b:0 s:2 ps:0 digest: 648D7A72-90CB-3858-9409-5C554BB43B8E error: Error Domain=NSOSStatusErrorDomain Code=-609 "Client is disallowed from making such an icon request" UserInfo={NSLocalizedDescription=Client is disallowed from making such an icon request} Connection interrupted, finishing translation with error Error Domain=TranslationErrorDomain Code=14 "(null)" Got response from extension with error: Error Domain=TranslationErrorDomain Code=14 "(null)" Reported that remote UI finished but didn't get finished configuration, reporting the error as: Error Domain=TranslationErrorDomain Code=20 "(null)" VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} Reported that remote UI finished but didn't get finished configuration, reporting the error as: Error Domain=TranslationErrorDomain Code=14 "(null)" VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} VS terminated with error: Error Domain=_UIViewServiceErrorDomain Code=1 "(null)" UserInfo={Terminated=disconnect method} Trigger the Translation: // check if we need to create a translation configuration if configuration == nil { configuration = TranslationSession.Configuration.init( source: Locale.Language(identifier: sourceLanguageCode), target: Locale.Language(identifier: targetLanguageCode) ) } else { // or just update the target code then invalidate the config to re-trigger the refresh of .translationTask() configuration?.source = Locale.Language(identifier: sourceLanguageCode) configuration?.target = Locale.Language(identifier: targetLanguageCode) configuration?.invalidate() } Prepare and check if Download sheet should be presented: .translationTask(configuration) { session in do { // prepare translation & present API download sheet if lanugage download needed. try await session.prepareTranslation() } catch { print("Translate failed: \(error)") } }

Is there a way to increase the frequency of UWB background ranging?

Hi there, I'm facing an issue when disconnecting CarPlay that the navigation session seems to be in some weird state where it is not properly finished. So when I reconnect CarPlay the "Metadata in instrument cluster or HUD" does not update anymore until I start another navigation session and stop that one. You can see that the instruction to the left on this screen recording is not updating anymore after a reconnect. https://www.youtube.com/watch?v=sncxyJULjQk I have a modified the CostalRoad sample app to add support for the HUD cluster and to auto start a navigation simulation when CarPlay connects. https://github.com/g4rb4g3/CoastalRoads Can anyone tell me what I have to do when CarPlay disconnect so I can start a new navigation session on reconnect that has a working HUD cluster? Fun fact is that Apple Maps handles this quite nice (https://www.youtube.com/watch?v=OpJEIyGcwdo), it somehow manages to finish the navigation session and brings up the HUD cluster just fine on reconnect. I wonder how I can achieve the same, anyone having an idea on that?