We are developing a DriverKit driver on Apple M1. We use the following code to prepare DMA buffer: IODMACommandSpecification dmaSpecification; bzero(&dmaSpecification, sizeof(dmaSpecification)); dmaSpecification.options = kIODMACommandSpecificationNoOptions; dmaSpecification.maxAddressBits = p_dma_mgr->maxAddressBits; kret = IODMACommand::Create(p_dma_mgr->device, kIODMACommandCreateNoOptions, &dmaSpecification, &impl->dma_cmd ); if (kret != kIOReturnSuccess) { os_log(OS_LOG_DEFAULT, "Error: IODMACommand::Create failed! ret=0x%x\n", kret); impl->user_mem.reset(); IOFree(impl, sizeof(*impl)); return ret; } uint64_t flags = 0; uint32_t segmentsCount = 32; IOAddressSegment segments[32]; kret = impl->dma_cmd->PrepareForDMA(kIODMACommandPrepareForDMANoOptions, impl->user_mem.get(), 0, 0, // 0 for entire memory &flags, &segmentsCount, segments ); if (kret != kIOReturnSuccess) { OSSafeReleaseNULL(impl->dma_cmd); impl->user_mem.reset(); IOFree(impl, sizeof(*impl)); os_log(OS_LOG_DEFAULT, "Error: PrepareForDMA failed! ret=0x%x\n", kret); return kret; } I allocated several 8K BGRA video frames, each with a size of 141557760 bytes, and prepared the DMA according to the method mentioned above. The process was successful when the number of frames was 15 or fewer. However, issues arose when allocating 16 frames: Error: PrepareForDMA failed! ret=0xe00002bd By calculating, I found that the total size of 16 video frames exceeds 2GB. Is there such a limitation in DriverKit that the total DMA size cannot exceed 2GB? Are there any methods that would allow me to bypass this restriction so I can use more video frame buffers?

Kevin's Guide to DEXT Signing The question of "How do I sign a DEXT" comes up a lot, so this post is my attempt to describe both what the issue are and the best current solutions are. So... The Problems: When DEXTs were originally introduced, the recommended development signing process required disabling SIP and local signing. There is a newer, much simpler process that's built on Xcode's integrated code-signing support; however, that newer process has not yet been integrated into the documentation library. In addition, while the older flow still works, many of the details it describes are no longer correct due to changes to Xcode and the developer portal. DriverKit's use of individually customized entitlements is different than the other entitlements on our platform, and Xcode's support for it is somewhat incomplete and buggy. The situation has improved considerably over time, particularly from Xcode 15 and Xcode 16, but there are still issues that are not fully resolved. To address #1, we introduced "development" entitlement variants of all DriverKit entitlements. These entitlement variants are ONLY available in development-signed builds, but they're available on all paid developer accounts without any special approval. They also allow a DEXT to match against any hardware, greatly simplifying working with development or prototype hardware which may not match the configuration of a final product. Unfortunately, this also means that DEXT developers will always have at least two entitlement variants (the public development variant and the "private" approved entitlement), which is what then causes the problem I mentioned in #2. The Automatic Solution: If you're using Xcode 16 or above, then Xcode's Automatic code sign support will work all DEXT Families, with the exception of distribution signing the PCI and USB Families. For completeness, here is how that Automatic flow should work: Change the code signing configuration to "Automatic". Add the capability using Xcode. If you've been approved for one of these entitlements, the one oddity you'll see is that adding your approved capability will add both the approved AND the development variant, while deleting either will delete both. This is a visual side effect of #2 above; however, aside from the exception described below, it can be ignored. Similarly, you can sign distribution builds by creating a build archive and then exporting the build using the standard Xcode flow. __ Kevin Elliott DTS Engineer, CoreOS/Hardware

We are looking for a solution (API, Frameworks) that would allow us to block any type of external device, including storage devices, HIDs, network adapters, and Bluetooth devices according with dynamic rules that comes from management server . This feature is important for endpoint security solutions vendors, and it can be implemented on other platforms and older versions of macOS using the IOKit framework and kexts. I have found one solution that can control the usage only of "storage" devices with the EndpointSecurity framework in conjunction with the DiskArbitration framework. This involves monitoring the MOUNT and OPEN events for /dev/disk files, checking for devices as they appear, and ejecting them if they need to be blocked.. Also, I have found the ES_EVENT_TYPE_AUTH_IOKIT_OPEN event in EndpointSecurity.framework, but it doesn't seem to be useful, at least not for my purposes, because ES doesn't provide AUTH events for some system daemons, such as configd (it only provides NOTIFY events). Furthermore, there are other ways to communicate with devices and their drivers apart from IOKit. DriverKit.framework does not provide the necessary functionality either, as it requires specific entitlements that are only available to certain vendors and devices. Therefore, it cannot be used to create universal drivers for all devices, which should be blocked. Any advice would be greatly appreciated!

We are developing an iOS app that communicates with a device using an NXP NTAG 5 chip in ISO15693 pass-through mode. While the app works flawlessly on older iPhone models (iPhone 8, SE, X) and most Android devices, we are experiencing severe reliability issues on iPhone 12, 13, 14, and 15. Issue Summary On newer iPhones (12–15), 90% of communication attempts fail. Retry strategies do not work, as the NFC session is unexpectedly canceled while handling CoreNFC custom commands. The issue is not consistent—sometimes all requests fail immediately, while other times, a batch of reads might succeed unexpectedly before failing again. Technical Details The failure occurs while executing the following request, which should return 256 bytes: tag.customCommand(requestFlags: .highDataRate, customCommandCode: commandCode, customRequestParameters: Data(byteArray)) { (responseData, error) in } The returned error is: -[NFCTagReaderSession transceive:tagUpdate:error:]:897 Error Domain=NFCError Code=100 "Tag connection lost" UserInfo={NSLocalizedDescription=Tag connection lost} For reference, we tested a comparable STM ST25 chip in ISO15693 and NDEF mode, and the exact same issue occurs. Observations and Debugging Attempts Positioning of the NFC antenna has been tested extensively. Disabling Bluetooth and Wi-Fi does not improve reliability. Rebooting the device or waiting between attempts sometimes improves success rates but does not provide a structural fix. When reading multiple blocks (e.g., 15 blocks of 256 bytes each): The process often fails within the first three blocks. After multiple failures, it may suddenly succeed in reading all blocks in one go before returning to a series of failures. The nfcd logs suggest issues at the low-level NFC and SPMI layers, indicating potential hardware or firmware-related problems: error 17:36:18.289099+0100 nfcd phOsalNfc_LogStr:65 NCI DATA RSP : Timer expired before data is received! error 17:36:18.292936+0100 nfcd NFHardwareSerialQuerySPMIError:1339 "Invalid argument" errno=22 setsockopt: SYSPROTO_CONTROL:IO_STOCKHOLM_SPMIERRORS error 17:36:18.293036+0100 nfcd phTmlNfc_SpmiDrvErrorStatus:1157 "Invalid argument" errno=22 Failed to query SPMI error registers error 17:36:18.293235+0100 nfcd phOsalNfc_LogStr:65 phLibNfc_SpmiStsRegInfoNtfHandler: Read Spmi Status Failed - pInfo set to NULL error 17:36:18.293313+0100 nfcd _Callback_NFDriverNotifyGeneral:2353 Unknown notification: 0x5b error 17:36:18.294163+0100 nfcd phOsalNfc_LogStr:65 Target Lost!! error 17:36:18.294678+0100 nfcd -[_NFReaderSession handleSecureElementTransactionData:appletIdentifier:]:164 Unimplemented error 17:36:18.294760+0100 nfcd -[_NFReaderSession handleSecureElementTransactionData:appletIdentifier:]:164 Unimplemented error 17:36:18.320132+0100 nfcd phOsalNfc_LogStr:65 ISO15693 XchgData,PH_NCINFC_STATUS_RF_FRAME_CORRUPTED Detected by NFCC during Data Exchange error 17:36:18.320291+0100 nfcd phOsalNfc_LogU32:74 phNciNfc_ChkDataRetransmission: Re-transmitting Data pkt Attempt..=1 error 17:36:18.622050+0100 nfcd phOsalNfc_LogStr:65 NCI DATA RSP : Timer expired before data is received! error 17:36:18.625857+0100 nfcd NFHardwareSerialQuerySPMIError:1339 "Invalid argument" errno=22 setsockopt: SYSPROTO_CONTROL:IO_STOCKHOLM_SPMIERRORS error 17:36:18.625919+0100 nfcd phTmlNfc_SpmiDrvErrorStatus:1157 "Invalid argument" errno=22 Failed to query SPMI error registers error 17:36:18.626132+0100 nfcd phOsalNfc_LogStr:65 phLibNfc_SpmiStsRegInfoNtfHandler: Read Spmi Status Failed - pInfo set to NULL error 17:36:18.626182+0100 nfcd _Callback_NFDriverNotifyGeneral:2353 Unknown notification: 0x5b error 17:36:18.626899+0100 nfcd phOsalNfc_LogStr:65 Target Lost!! error 17:36:18.627482+0100 nfcd -[_NFReaderSession handleSecureElementTransactionData:appletIdentifier:]:164 Unimplemented error 17:36:18.627568+0100 nfcd -[_NFReaderSession handleSecureElementTransactionData:appletIdentifier:]:164 Unimplemented error 17:36:18.833174+0100 nfcd -[_NFReaderSession handleSecureElementTransactionData:appletIdentifier:]:164 Unimplemented error 17:36:19.145289+0100 nfcd phOsalNfc_LogStr:65 NCI DATA RSP : Timer expired before data is received! error 17:36:19.149233+0100 nfcd NFHardwareSerialQuerySPMIError:1339 "Invalid argument" errno=22 setsockopt: SYSPROTO_CONTROL:IO_STOCKHOLM_SPMIERRORS error 17:36:19.149353+0100 nfcd phTmlNfc_SpmiDrvErrorStatus:1157 "Invalid argument" errno=22 Failed to query SPMI error registers error 17:36:19.149730+0100 nfcd phOsalNfc_LogStr:65 phLibNfc_SpmiStsRegInfoNtfHandler: Read Spmi Status Failed - pInfo set to NULL error 17:36:19.149797+0100 nfcd _Callback_NFDriverNotifyGeneral:2353 Unknown notification: 0x5b error 17:36:19.150463+0100 nfcd phOsalNfc_LogStr:65 Target Lost!! Any solutions? Has anyone else encountered similar behavior with CoreNFC on iPhone 12–15? Could this be related to changes in NFC hardware or power management in newer iPhone models? Any suggestions on possible workarounds or alternative approaches would be greatly appreciated.

I read that iPadOS supports driverkit, and, presumably, the same serial FTDI UARTs as macOS. Has this been migrated to USB-C iPhones on iOS 18? After some searching, the developer doc is not clear, and web responses are contradictory. We are currently using it for a wired sensor option of our BlueTooth HR sensor. When it is used in wired config, the radios are turned off. This is important to some of our customers. Since Lightning MFI sensors are being discontinued with Apple killing Lightning, we would love to have an alternative for iOS. -- Harald

Hello Everyone, I have noticed an inconsistency in the KEXT status between the System Information Extensions section and the output of the kextstat command. In System Information, the extension appears as loaded: ACS6x: Version: 3.8.3 Last Modified: 2025/3/10, 8:03 PM Bundle ID: com.Accusys.driver.Acxxx Loaded: Yes Get Info String: ACS6x 3.8.4 Copyright (c) 2004-2020 Accusys, Ltd. Architectures: arm64e 64-Bit (Intel): No Location: /Library/Extensions/ACS6x.kext/ Kext Version: 3.8.3 Load Address: 0 Loadable: Yes Dependencies: Satisfied Signed by: Developer ID Application: Accusys, Inc (K3TDMD9Y6B) Issuer: Developer ID Certification Authority Signing time: 2025-03-10 12:03:20 +0000 Identifier: com.Accusys.driver.Acxxx TeamID: K3TDMD9Y6B However, when I check using kextstat, it does not appear as loaded: $ kextstat | grep ACS6x Executing: /usr/bin/kmutil showloaded No variant specified, falling back to release I use a script to do these jobs echo " Change to build/Release" echo " CodeSign ACS6x.kext" echo " Compress to zip file" echo " Notary & Staple" echo " Unload the old Acxxx Driver" echo " Copy ACS6x.kext driver to /Library/Extensions/" echo " Change ACS6x.kext driver owner" echo " Loaded ACS6x.kext driver" sudo kextload ACS6x.kext echo " Rebiuld system cache" sudo kextcache -system-prelinked-kernel sudo kextcache -system-caches sudo kextcache -i / echo " Reboot" sudo reboot But it seems that the KEXT is not always loaded successfully. What did I forget to do? Any help would be greatly appreciated. Best regards, Charles

I have Windows drives on my Mac but I didn't get the Wellness boot Campdrivers how can I install them

I’m experiencing a persistent issue with the new USB-C lossless audio feature on AirPods Max (firmware 7E101). I’m using original Apple USB-C to USB-C cable and have tested this setup across multiple Apple devices, including: • iPhone (running iOS 18.5 beta) • iPad Pro with USB-C • MacBook Pro (15.5 Beta) ❗️Problem: Despite Apple’s announcement that AirPods Max now support wired lossless audio over USB-C, I’m unable to get any audio output via USB-C on any device. • On iPhone: I disabled Bluetooth, connected via USB-C — no sound. • On MacBook: The device is shown as “AirPods Max USB Audio” in System Information > USB, but it does not appear in Sound settings or Audio MIDI Setup as an available output. • On iPad Pro: Same behavior — no audio output. Other details: • I performed a factory reset of the headphones, but the LED flashes red instead of the expected amber → white sequence. (Apple’s documentation does not mention red flash behavior during reset — might indicate an error state.) • The issue is not isolated to the iOS 18.5 beta — since the same behavior occurs on macOS and iPadOS. What works: • Bluetooth audio still works fine. • The cable and USB-C ports function with other audio devices. ⸻ Summary: It looks like: • USB audio is being detected on a hardware level (at least on Mac), • but software support for output (especially on macOS/iPadOS) is either not implemented, disabled, or bugged — possibly connected to iOS 18.5 beta or broader OS-level limitations.

Hello everyone. I have been developing PCIe device driver through Thunderbolt. However, it was confirmed that up to three devices connected to the daisy chain worked normally, but the fourth device failed to operate the _CopyDeviceMemoryWithIndex() function for connection with the BAR0 App and did not work properly. The standard specification of Thunderbolt 3/4 is said to be supported by daisy chain connection up to 6-device, but in reality, it is only 3 units, so I ask the forum for technical confirmation. Of course total 4 device by 2-port x 2-device daisy chain connecting has working well. The PCI entry in System information indicates that all devices have normal load of the PCIe device driver. Thank you.

We’re looking for a reliable way to determine whether an iPad device supports DriverKit. Since there doesn't appear to be a direct public API for this, our current approach is as follows: Retrieve the device’s model identifier (e.g., "iPad14,8") and the iOS/iPadOS version. Map the model identifier to a known iPad model and its associated chip. If the device has an M-series chip, we assume it supports DriverKit. For future-proofing, we plan to assume that any future iPad with a model identifier of iPad15,* or higher will contain an M-series chip and therefore support DriverKit. We have a couple of questions: Is there a more reliable or official API to determine the chip version or DriverKit support? Is it reasonable to rely on the assumptions outlined in steps 2 and 3 for determining DriverKit compatibility?

I have reference some related post for this issue: https://developer.apple.com/documentation/xcode-release-notes/xcode-16-release-notes#Foundation https://developer.apple.com/forums/thread/762711 Unfortunately, I'm facing the similar issues even though using Xcode Version 16.2 (16C5032a). we have the following build environment: Xcode version: Xcode 16.2 (16C5032a) macOS Version: macOS 14.7.4 (23H420) Everything builds and install fine. But when attempting to plug on Device on macOS 14.7.4 it crashes immediately with what appears to be a missing Foundation symbol. Crashed Thread: 0 Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Termination Reason: Namespace DYLD, Code 4 Symbol missing Symbol not found: __ZThn48_N21IOUserNetworkEthernet25registerEthernetInterfaceE10ether_addrPP24IOUserNetworkPacketQueuejP29IOUserNetworkPacketBufferPoolS5_ Referenced from: <ECE57ABF-0633-3C3B-8427-FB25CC706343> /Library/SystemExtensions/*/com.asix.dext.pciedevice Expected in: <CDEB3490-B1E0-3D60-80CE-59C0682A4B03> /System/DriverKit/System/Library/Frameworks/NetworkingDriverKit.framework/NetworkingDriverKit (terminated at launch; ignore backtrace) Thread 0 Crashed: 0 dyld 0x1041da4c8 __abort_with_payload + 8 1 dyld 0x1041e50cc abort_with_payload_wrapper_internal + 104 2 dyld 0x1041e5100 abort_with_payload + 16 3 dyld 0x1041767f0 dyld4::halt(char const*, dyld4::StructuredError const*) + 304 4 dyld 0x1041732ec dyld4::prepare(dyld4::APIs&, dyld3::MachOAnalyzer const*) + 3888 5 dyld 0x104171ef4 start + 1868 Thread 0 crashed with ARM Thread State (64-bit): x0: 0x0000000000000006 x1: 0x0000000000000004 x2: 0x000000016bdd2810 x3: 0x0000000000000172 x4: 0x000000016bdd2410 x5: 0x0000000000000000 x6: 0x000000016bdd1400 x7: 0x000000016bdd1460 x8: 0x0000000000000020 x9: 0x000000016bdd237c x10: 0x000000000000000a x11: 0x0000000000000000 x12: 0x0000000000000038 x13: 0x0000000000000000 x14: 0x0000000188e77f9d x15: 0x0000000000008000 x16: 0x0000000000000209 x17: 0x000000010416f37c x18: 0x0000000000000000 x19: 0x0000000000000000 x20: 0x000000016bdd2410 x21: 0x0000000000000172 x22: 0x000000016bdd2810 x23: 0x0000000000000004 x24: 0x0000000000000006 x25: 0x00000000000000a8 x26: 0x000000016bdd32d8 x27: 0x000000010405e090 x28: 0x0000000000000001 fp: 0x000000016bdd23e0 lr: 0x00000001041e50cc sp: 0x000000016bdd23a0 pc: 0x00000001041da4c8 cpsr: 0x80001000 far: 0x0000000000000000 esr: 0x56000080 Address size fault Binary Images: 0x10416c000 - 0x1041f7fff dyld (*) <4fe051cf-29dc-3f02-890b-33144fa09253> /usr/lib/dyld 0x10402c000 - 0x10403ffff com.asix.dext.pciedevice (0.1.6) <ece57abf-0633-3c3b-8427-fb25cc706343> /Library/SystemExtensions/*/com.asix.dext.pciedevice 0x0 - 0xffffffffffffffff ??? (*) <00000000-0000-0000-0000-000000000000> ??? External Modification Summary: Calls made by other processes targeting this process: task_for_pid: 0 thread_create: 0 thread_set_state: 0 Calls made by this process: task_for_pid: 0 thread_create: 0 thread_set_state: 0 Calls made by all processes on this machine: task_for_pid: 0 thread_create: 0 thread_set_state: 0 VM Region Summary: ReadOnly portion of Libraries: Total=8612K resident=0K(0%) swapped_out_or_unallocated=8612K(100%) Writable regions: Total=12.2M written=0K(0%) resident=0K(0%) swapped_out=0K(0%) unallocated=12.2M(100%) Is it expected that this should work? Is this a known issue? Is there any workaround for it? Should I file feedback or a DTS?

Hi All, We've been working on a new CarPlay-supported App and are hoping for advice on how to achieve this. We have completed the CarPlay Entitledment Request, but have not received any response from Apple. Given we're close to launch on Android, we'd love to have these projects completed together. Any advice on how to make contact with the approvals team, or suggestions on how long this will normally take? If they're no longer taking applications or rejection is high, any guidance would be greatly appreciated too!

I have a dext that creates a periodic timer on its own dispatch queue. The callback is declared as follows: virtual void HandleTimer( OSAction *action, uint64_t time ) TYPE(IOTimerDispatchSource::TimerOccurred); The timer is allocated as follows: CreateActionHandleTimer( size, &ivars->TimerHandler ); IODispatchQueue::Create( "TimerQueue", 0, 0, &ivars->TimerDispatchQueue ); IOTimerDispatchSource::Create( ivars->TimerDispatchQueue, &ivars->TimerDispatchSrc ); I can start up the timer and it works just fine. However, in my Stop() method, when trying to shut the timer down, I get an assertion in OSAction::Cancel() for TimerHandler: Assertion failed: (queue), function Cancel, file uioserver.cpp, line 4401. What does this assertion indicate or is the source code available? If so, where? I'm using macOS 15.5. Note I am attempting to cancel the handler after the dispatch source and queue are canceled and the cleanup methods have been called (which is working). But, cancelling TimerHandler first also asserts.

I need to implement an app that exchanges data with peripherals through TypeC on Apple 15 phones, but I have two questions that I need to ask for help: Which library is used to communicate with peripherals through the TypeC port of the Apple mobile phone? Do peripherals need to pass MFi authentication before they can communicate with the App?

I am currently developing a kiosk system that incorporates an iPad along with a custom peripheral device. The two components are intended to communicate via USB serial. I have encountered a critical issue while working with the official DriverKit sample code provided at the following link: https://developer.apple.com/documentation/driverkit/communicating-between-a-driverkit-extension-and-a-client-app Model info : iPad Pro 12.9-inch (5th generation / M1 chipset) iPadOS 18.4.1 App Stops Functioning After Repeated Builds When I first build and run the sample code without any modifications, it works as expected. However, after making changes and running the app repeatedly on the iPad, it eventually reaches a state where the app stops functioning completely — no logs are printed, and device communication fails. Reinstalling the app or rebooting the iPad does not resolve the issue. Even when I revert to the original, unmodified sample code, the problem persists. Surprisingly, if I generate a new Bundle Identifier, the app functions normally again. I would like to ask: What could be causing this behavior? Have similar cases been reported before? For your reference, I’ve attached a video demonstrating the issue and the source code used during the recording: Source Code: https://drive.google.com/file/d/14whvWwuhrmS5VoR3sSKyNT-GpTPC_c_8/view?usp=sharing Video: https://drive.google.com/file/d/1SfqIkEphSDrvg-CKS6KBcJ1VBP3cPqCC/view?usp=sharing Request for USB Serial Communication Reference Currently, due to the issue above, I am unable to obtain a device instance at all. Even assuming this is resolved, I noticed that the sample code does not include any implementation or reference material for USB serial communication itself. Is there any official sample code or documentation available that demonstrates USB serial communication between an iPad and an external device using DriverKit? Difficulty Debugging Due to Missing os_log Output Another challenge I'm facing is the inability to view os_log output while connecting the USB device to the iPad. This significantly hinders the debugging process during DriverKit development. Are there any recommended or supported methods for accessing logs and debugging effectively in this environment?

I want to update my iPhone 15 Pro to iOS 26 from iOS 18.5. I downloaded ipsw firmware. But iTunes and Apple Devices App requires update version of app for update to iOS 26. But I use last version of iTunes / Apple Devices, which was realised 2 May, 2025. That mean Apple need to update their apps for adaptation it to iOS 26 update?

We're seeing a consistent issue where iPads with the A16 chip fail to connect to our BLE device, which uses a Silicon Labs chip running Gecko SDK 3.x. All other Apple devices — including older iPads and iPhones — connect without any problems. According to Silicon Labs, the issue stems from the iPad A16 sending an LL_CHANNEL_REPORTING_IND message (opcode 0x28) during connection establishment: Per Silicon Labs: "Currently the iPad 16 will send a message for LL_CHANNEL_REPORTING_IND (opcode 0x28). This is a feature that is not supported in Gecko SDK 3.x. Shortly after, the BLE module responds with an 'Unknown Response' (opcode 0x07), indicating that it does not support opcode 0x28 After this exchange the iPad stops sending meaningful transactions to the BLE module and eventually closes the connection. The BLE Module is responding to this unknown request as specified in the BT Core Spec Volume 6 Part B." Unfortunately, the firmware on these BLE modules cannot be updated remotely, and we've already shipped several thousand units to customers. Given how widely Silicon Labs' BLE modules are deployed, we suspect this issue could be affecting many other developers and products as well. We’re hoping Apple might offer a workaround or allow us access — even internally or unofficially — to suppress or bypass this feature in CoreBluetooth for this specific scenario. For example, is there a way to disable LL_CHANNEL_REPORTING_IND or instruct the stack to ignore the unknown response from the peripheral? We’re open to any workaround via CoreBluetooth (even private APIs or entitlements, if necessary) that would allow us to preserve compatibility without a mass recall. If there's an Apple engineer monitoring this, we'd be extremely grateful for guidance or escalation. Thank you!

We have developed the driver for the ProCapture video capture card based on PCIDriverKit. The App can communicate with the driver through the UserClient API. Currently, there is an issue where, when the App starts, there is a small probability that it causes a driver crash. However, the crash stack trace does not point to our code but appears to be within the PCIDriverKit framework. We have spent several weeks debugging but still cannot identify the root cause of the crash. Could you please review the crash log and suggest any methods to help pinpoint the issue? com.magewell.ProCaptureDriver-2025-09-15-153522.ips com.magewell.ProCaptureDriver-2025-09-15-082500.ips

Dear Apple engineers, We have developed a DriverKit (DEXT) driver for an HBA RAID controller. The RAID controller is connected to hosts through Thunderbolt (PCIe port of the Thunderbolt controller). We do plug/unplug tests to verify the developed driver. The test always fails in about 100 cycles with a MacOS crash (panic). The panic contains “LLC Bus error (Unavailable) from cpu0: FAR=0xa40100008 LLC_ERR_STS/ADR/INF=0x80/0x300480a40100008/0x1400000005 addr=0xa40100008 cmd=0x18(ACC_CIFL2C_CMD_RD_LD: request for load miss in E or S state)” At first we assumed that the issue is with hardware. But we did this test on different hosts (MacMini M3 and M4) with different units of our device. The error points to the same physical address FAR=0xa40100008 even if the hosts are different. The 2 full panic logs are attached (one for M4, another one for M3 host). Could you share your understanding of the crash and give any hints on how we can fix it? Please let us know if you need any additional data. Thank you M3 panic: https://drive.google.com/file/d/1GJXd3tTW6ajdrHpFsJxO_tWWYKYIgcMc/view?usp=share_link M4 panic: https://drive.google.com/file/d/1SU-3aBSdhLsyhhxsLknzw9wGvBQ9TbJC/view?usp=share_link

We want to allocate a block of contiguous memory (≤1M) for audio ring DMA usage, but we haven't found any explicit method in the DriverKit documentation for allocating contiguous memory. I'm aware that IOBufferMemoryDescriptor::Create can be used in DriverKit to allocate memory and share it with user space. However, is the allocated memory physically contiguous? Can it guarantee that when I subsequently call PrepareForDMA in IODMACommand, there will be only one segment? Could you please help review this? Thank you!