Hi, You're here because you've had issues with your implementation of In-App Provisioning Extensions for Apple Pay In-App Provisioning or In-App Verification. To prevent sending sensitive credentials in plain text, create a new report in Feedback Assistant to share the details requested below with the appropriate log profiles installed. Gathering Required Information for Troubleshooting Apple Pay In-App Provisioning or In-App Verification Issues While troubleshooting Apple Pay In-App Provisioning or In-App Verification, it is essential that the issuer is able to collect logs on their device and check those logs for error message. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Apple Pay and Wallet profiles on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The bundle IDs App bundle ID Non-UI app extension bundle ID (if applicable) UI app extension bundle ID (if applicable) The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: Open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. The type of provisioning failure (e.g., error at Terms & Conditions, error when adding a card, etc.) The issuer/network/country of the provisioned card (e.g., Mastercard – US) Last 4 digits of the FPAN Last 4 digits of the DPAN (if available) Was this test initiated from the Issuer App? (e.g., yes or no) The type of environment (e.g., sandbox or production) Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or bundle ID of your app or app extensions in the Console app. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hi, To ensure the issue is not caused by an error within your app or web service request, please review the Apple Pay Merchant Integration Guide. Additionally, please review the following technotes on Apple Pay: TN3173: Troubleshooting issues with your Apple Pay merchant identifier configuration TN3174: Diagnosing issues with the Apple Pay payment sheet on your website TN3175: Diagnosing issues with displaying the Apple Pay button on your website TN3176: Troubleshooting Apple Pay payment processing issues If the resources above don’t help identify the cause of the error, please provide more information about your app or web services to get started. To prevent sending sensitive credentials in plain text, create a report in Feedback Assistant to share the details requested below. Additionally, if the error is something we need to investigate further, the appropriate engineering teams also have access to the same information and can communicate with you directly within Feedback Assistant for more information, as needed. Please follow the instructions below to submit your report. For issues occurring with your native app or web service, perform the following steps: Install the Apple Pay profile on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp of when the issue was reproduced. Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or merchant domain in the Safari Web Inspector. See Inspecting Safari on macOS to learn more. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay website. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your web implementation, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

iOS 16 and earlier On iOS 16 and earlier, Apple Pay on the Web required Safari—and all interactions with the Apple Pay API to come from the parent/top level page. In order to facilitate the Apple Pay button in an HTML inline frame (iframe), there will need to be cross frame communication between the child and parent pages. Cross frame communication should be secure and robust, therefore the use of postMessage for this purpose is recommended. The expectation is for all communication with Apple Pay to occur from the parent page, so the iframe must relay all Apple Pay related events to the parent to handle. Some examples: Apple Pay availability: The parent calls applePayCapabilities, then sends the message of the response to the iframe, which then uses the value to toggle the visibility of the Apple Pay button. Apple Pay session: The iframe receives an onclick() event when the Apple Pay button is clicked and sends the message to the parent (providing details about the transaction). The parent create the payment request to obtain the session validation URL, and eventually receive session credentials and invokes completeMerchantValidation() to prevent the payment sheet. After the payment is authorized by the Payment Service Provider (PSP), the parent either: Redirects the parent page to a payment success page; or Sends a message to the iframe to complete the transaction flow itself. iOS 17 and later On IOS 17 and later, the iframe HTML element should include the allow="payment" attribute, which should facilitate the cross frame communications instead of needing a dedicated JavaScript library. This means all of the Apple Pay code/calls can reside in the iframe page—which is typically a hosted page from a Payment Service Provider (PSP), all the parent page—typically a merchant—has to do is add the attribute mentioned above to the iframe element. Important: Regardless of the iOS version, the PSP/merchant always needs to make sure the parent page domain is the one registered in the Developer portal, and used in the request to generate a merchant session via ApplePaySession. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Team, We are currently checking out on Apple Pay using ALL and MRU as currencies. We have authorized the payment via Touch ID; however, we are not receiving the onPaymentAuthorized event. Could you please confirm if Apple Pay supports ALL and MRU currencies? We have confirmed that it works with other currencies. Thank you!

Cybersource production support has clarified issue as below "On the BAD Case, it seems that the Apple Payload did not contain the "onlinePaymentCryptogram" object within the JSON. The Cryptogram is critical and mandatory. Since the merchant cannot really control this, and since CYBS is just decrypting the payload and uses it, we cannot comment as to why it was missing. The merchant would need to reach out to Apple and/or decrypt the payment themselves locally to check if and why this data was not present, for troubleshooting purposes."

please bear with me, i am NOT a developer. we have third party developer creating a banking app that is throwing an error when trying to provision MasterCard for Apple Pay. MasterCard says they do not see the request come in at all. our developer says the issue is between mastercard and apple - and asked us to reach out to Apple. Information provided from our developer: “Error code 2 is 'system cancelled' from the PKAddPaymentPassError enum. Basically, there is an issue between Apple and Mastercard (using the encrypted card info from...” Response from Mastercard Connect: Upon further research with the examples you shared we are not seeing any attempt that reached to MC

I am currently working on decrypting Apple Pay tokens with Laravel PHP, and I have encountered a few uncertainties regarding the decryption process and the usage of AES-GCM. Could you please clarify the following points: Algorithm Confirmation: Am I using the correct algorithm for decrypting the data key? Specifically, I am utilizing AES-256-GCM with the algorithm ID "id-aes256-GCM" (2.16.840.1.101.3.4.1.46), as specified in the documentation. Is this the recommended algorithm for decrypting the Apple Pay token's data key? Authentication Tag: In the decryption process, it seems that an authentication tag is required, but I am not sure where to obtain it from. Could you confirm how the authentication tag is generated or provided during the encryption process? If the tag is part of the token or is transmitted separately, could you clarify where I can retrieve it in order to proceed with the decryption successfully? IV and Other Parameters: I am using an initialization vector (IV) of 16 null bytes (00000000000000000000000000000000) as specified in the documentation. Could you confirm that this is correct and aligns with the expected parameters for the AES-GCM decryption? Are there any other specific parameters or considerations I should be aware of when implementing the decryption of Apple Pay tokens? GCM vs Other Encryption Modes: Can you confirm that AES-GCM is the preferred and required encryption mode, or is there any flexibility to use other modes (e.g., AES-CBC) without compromising security? Your guidance would be greatly appreciated to ensure I am following the correct decryption procedure for Apple Pay tokens. Thank you in advance for your support.

We have verified our domain but if the file is removed from the deployed site after verification will this impact using ApplePaySession.applePayCapabilities in real time? We use that method from the JS api in our React app to determine whether or not to show the apple pay button. When that function is called in the browser, do the apple servers ping the https://our.domain.com/.well-known/apple-developer-merchantid-domain-association URL at that time? Or do they check for it periodically? The reason for asking is that with our many environments we wonder if we can verify each environment's domain by adding the file once. The file will be wiped out by our CICD process as it goes up the environment stack through our development workflow. Or do we need to maintain that file for each environment and add something to our build process?

Hi team at Apple, here is a scenario we came across: The order of priority of payment methods in Apple Wallet follows: Credit Debit Apple Cash Our app displays a payment sheet that excludes credit cards. Instead of a debit card, the default payment option shown to the user on the payment sheet is Apple Cash. Is this a known issue or have we configured something wrong in our end?

Hi , This is regarding the ApplePayRecurringPayment Request and Apple Pay on Web functionality. Does Apple Pay on web providing functionality that collects payments from the stored credit card issuer bank (or) it only provides secured wallet functionality that provides a token which then has to be utilized to send a seperate payment request through a third party payment gateway to collect the payments from the credit card issuer bank. thanks

We are working with Saferpay. And integrating Applepay Server to Server. But we are having token generation issue. It does not give a valid test card information. We have created a tester account as India country. Is that an issue?

We are implementing Apple Pay on our website, but we only sell services and would prefer that the shipping address section of the Apple Pay modal doesn't require the shipping address and just show the billing address. Is there any way to achieve this?

We have an app that uses the pass-presentation-suppression entitlement and calls requestAutomaticPassPresentationSuppression to prevent the Wallet app from being presented when the device is displaying a barcode to a barcode/nfc reader. This works as expected for users of the standard Apple Wallet app. However, it does not prevent third-party wallet apps from being launched, which hides the barcode and prevents it from being scanned properly. What options do I have to prevent third-party wallet apps from launching or interfering while our app is actively presenting a barcode?

I am trying to get a pass reader certified through the mFi / WPC certification process. The problem I have is that the Certifier app will not allow testing results to be submitted due to some missing information. I need support to discuss the missing information, but I have received no replies from the email provided for WPC Certification Representative. Does anyone here know how to get support for the WPC Certification process?

Hello everyone, We're implementing Apple Pay on the web and are already live, processing transactions. However, we've noticed that occasionally the onlinePaymentCryptogram returned in the paymentData contains spaces, causing it to be rejected by acquirers. Has anyone else encountered this issue? Any insights would be greatly appreciated.

Hello, We are experiencing an issue with Apple Pay integration in our application. We are using WKWebView to handle various payment methods, but we are unable to complete payments via Apple Pay. Upon debugging the WKWebView, we received the following error message: "400 No required SSL certificate was sent" when attempting to process the payment. Currently, we are using a Let's Encrypt SSL certificate. Could you please confirm whether this certificate is suitable for Apple Pay, or if we should be using a different SSL certificate?

What is the version policy for the Apple Pay SDK Javascript ? The documentation refers to this link : https://applepay.cdn-apple.com/jsapi/1.latest/apple-pay-sdk.js The future updates will overrride the file on that link ? Is there a way to be notified of any changes ? We are using a previous version named v1 : https://applepay.cdn-apple.com/jsapi/v1/apple-pay-sdk.js What are the risks not using changing to the lastesdt link ? Thank you for your help.

We’ve integrated in-app card provisioning into our application. All required configurations have been completed, including: Token Service Provider (TSP) setup Certificates uploaded to the Apple Developer portal While the card is successfully added to the Wallet app, our application is currently unable to retrieve or read the added passes.

Our company sells insurance and we'd like to offer annual renewals via Apple Pay on the Web. Most of the docs seem to point towards using recurringpaymentrequest but this method required an amount value which would only be calculated at renewal time. It appears that Shopify is doing something akin to what we want where they do auto payments so my question is can we do annual payments with unknown renewal prices with Apple Pay for Web ? What we cannot do is show the renewal price like this as it being insurance is almost certain to change. This is our current code which works but won't get past the regulator. const applePayPaymentRequestAnnual = { countryCode: 'GB', currencyCode: 'GBP', supportedNetworks: ['visa', 'masterCard'], merchantCapabilities: ['supports3DS'], requiredBillingContactFields: ['postalAddress', 'email'], requiredShippingContactFields: ['phone'], recurringPaymentRequest: { paymentDescription: 'Annual Insurance Renewal', regularBilling: { label: 'Annual Renewal Premium', amount: price, paymentTiming: "recurring", recurringPaymentIntervalUnit: "year", recurringPaymentStartDate: year + "-" + month + "-" + day + "T00:00:00.000Z", type: 'final' }, managementURL: window.location.protocol + '//' + window.location.host + '/manage-policy', tokenNotificationURL: window.location.protocol + '//' + window.location.host + '/apple-pay-notifications' }, lineItems: [{ label: alabel, amount: price, }], total: { label: alabel, amount: price, type: "final" }, }

你好，我们6月1日收到比较多的韩国用户反馈购买我们的内购以后，系统会在稍后的几分钟再次多次从用户的卡里扣出相应的款项，但是我们没有办法第一时间反馈给你们，导致很多用户流失，请问我们怎么才能第一时间联系到你们，还有我们怎么才能第一时间知道是你们的系统是否某个功能出了问题，是否也有相应的论坛我们可以第一时间看到你们相关问题的报道，这样我们排查问题就没那么辛苦，感谢

For the pushToken sent by APNS to register a wallet pass for update notifications, is there a max length or size that APNS will send? I save the token in my database and have it defined as varchar(256), but I have had some instances where the pushToken is larger than that. I'd like to know if there's an absolute max size that APNS will send. Then I'll know if I should reject requests with tokens larger than what's expected, and/or if I need to make the token size larger in the database.

Cybersource production support has clarified issue as below "On the BAD Case, it seems that the Apple Payload did not contain the "onlinePaymentCryptogram" object within the JSON. The Cryptogram is critical and mandatory. Since the merchant cannot really control this, and since CYBS is just decrypting the payload and uses it, we cannot comment as to why it was missing. The merchant would need to reach out to Apple and/or decrypt the payment themselves locally to check if and why this data was not present, for troubleshooting purposes."

Hi, For one of my projects, I am using the Web Drop-in component of Adyen PSP on a Salesforce B2B Commerce site. One of the payment methods is Apple Pay. The payment method is rendered, but the Apple Pay button is not clickable. We tried debugging it but could not identify the root cause. Could you advise how this issue can be fixed? Thanks