Hi, You're here because you've had issues with your implementation of In-App Provisioning Extensions for Apple Pay In-App Provisioning or In-App Verification. To prevent sending sensitive credentials in plain text, create a new report in Feedback Assistant to share the details requested below with the appropriate log profiles installed. Gathering Required Information for Troubleshooting Apple Pay In-App Provisioning or In-App Verification Issues While troubleshooting Apple Pay In-App Provisioning or In-App Verification, it is essential that the issuer is able to collect logs on their device and check those logs for error message. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Apple Pay and Wallet profiles on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The bundle IDs App bundle ID Non-UI app extension bundle ID (if applicable) UI app extension bundle ID (if applicable) The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: Open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. The type of provisioning failure (e.g., error at Terms & Conditions, error when adding a card, etc.) The issuer/network/country of the provisioned card (e.g., Mastercard – US) Last 4 digits of the FPAN Last 4 digits of the DPAN (if available) Was this test initiated from the Issuer App? (e.g., yes or no) The type of environment (e.g., sandbox or production) Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or bundle ID of your app or app extensions in the Console app. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hi, To ensure the issue is not caused by an error within your app or web service request, please review the Apple Pay Merchant Integration Guide. Additionally, please review the following technotes on Apple Pay: TN3173: Troubleshooting issues with your Apple Pay merchant identifier configuration TN3174: Diagnosing issues with the Apple Pay payment sheet on your website TN3175: Diagnosing issues with displaying the Apple Pay button on your website TN3176: Troubleshooting Apple Pay payment processing issues If the resources above don’t help identify the cause of the error, please provide more information about your app or web services to get started. To prevent sending sensitive credentials in plain text, create a report in Feedback Assistant to share the details requested below. Additionally, if the error is something we need to investigate further, the appropriate engineering teams also have access to the same information and can communicate with you directly within Feedback Assistant for more information, as needed. Please follow the instructions below to submit your report. For issues occurring with your native app or web service, perform the following steps: Install the Apple Pay profile on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp of when the issue was reproduced. Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or merchant domain in the Safari Web Inspector. See Inspecting Safari on macOS to learn more. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay website. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your web implementation, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

iOS 16 and earlier On iOS 16 and earlier, Apple Pay on the Web required Safari—and all interactions with the Apple Pay API to come from the parent/top level page. In order to facilitate the Apple Pay button in an HTML inline frame (iframe), there will need to be cross frame communication between the child and parent pages. Cross frame communication should be secure and robust, therefore the use of postMessage for this purpose is recommended. The expectation is for all communication with Apple Pay to occur from the parent page, so the iframe must relay all Apple Pay related events to the parent to handle. Some examples: Apple Pay availability: The parent calls applePayCapabilities, then sends the message of the response to the iframe, which then uses the value to toggle the visibility of the Apple Pay button. Apple Pay session: The iframe receives an onclick() event when the Apple Pay button is clicked and sends the message to the parent (providing details about the transaction). The parent create the payment request to obtain the session validation URL, and eventually receive session credentials and invokes completeMerchantValidation() to prevent the payment sheet. After the payment is authorized by the Payment Service Provider (PSP), the parent either: Redirects the parent page to a payment success page; or Sends a message to the iframe to complete the transaction flow itself. iOS 17 and later On IOS 17 and later, the iframe HTML element should include the allow="payment" attribute, which should facilitate the cross frame communications instead of needing a dedicated JavaScript library. This means all of the Apple Pay code/calls can reside in the iframe page—which is typically a hosted page from a Payment Service Provider (PSP), all the parent page—typically a merchant—has to do is add the attribute mentioned above to the iframe element. Important: Regardless of the iOS version, the PSP/merchant always needs to make sure the parent page domain is the one registered in the Developer portal, and used in the request to generate a merchant session via ApplePaySession. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hi everyone, I have a question regarding App Store approval. In my country, Apple In-App Purchases are not supported, so for users in unsupported regions we need to use a third-party payment provider. For countries where In-App Purchases are supported, we plan to use Apple IAP. Could you please advise on the correct approach to ensure the app complies with App Store guidelines and can be approved?

Hello, I’m experiencing a strange issue with a newly created Subscription Group in my iOS app. For all my existing subscription groups, everything works perfectly — initial purchase, renewals, cancellations, all notifications arrive normally. But for this one newly created group, the first purchase never triggers any server notification from App Store Server Notifications (ASSN). ⸻ 📘 Problem Summary • I created a new Subscription Group in App Store Connect. • The products are all Approved and Published for over a week. • Users can successfully purchase the subscription in production. • The purchase is shown as Purchased in the App Store purchase UI. • The receipt can be fetched locally on device. • But my server receives no notifications, including: • DID_RENEW • DID_CHANGE_RENEWAL_STATUS • SUBSCRIBED • ONE_TIME_CHARGE • CONSUMPTION_REQUEST • etc. The old subscription groups still send notifications normally, so the notification URL and server infrastructure are correct.

Hi Team, For last 24 hours one of our team members is unable to login to apple dev portal due to two factor authentication not being sent. Error we are getting is "Verification codes can't be sent to this phone number at this time. Please try again later"

During the development of our 3D game project, we encountered high memory usage requirements. To address this, we enabled Apple’s Extended Virtual Addressing (EVA) and Increased Memory Limit services. We have confirmed that both services were enabled in the developer backend as well as in Xcode, and we also used updated development and distribution certificates when building the app. However, in our validation process, it seems that EVA and Increased Memory Limit are not taking effect — the game still experiences memory overflow and crashes. Could you please advise: The correct steps to properly use Extended Virtual Addressing and Increased Memory Limit; How we can confirm whether these services are functioning as expected?

Hello, On my website, I have a button to make a payment via Apple Pay. When I click on it, the Touch ID window opens correctly. However, when I place my finger on the Touch ID, I get a payment error. This issue only occurs in production mode. In sandbox mode, everything works perfectly. Here is a log file : log.txt Thank you in advance for your help.

Cybersource production support has clarified issue as below "On the BAD Case, it seems that the Apple Payload did not contain the "onlinePaymentCryptogram" object within the JSON. The Cryptogram is critical and mandatory. Since the merchant cannot really control this, and since CYBS is just decrypting the payload and uses it, we cannot comment as to why it was missing. The merchant would need to reach out to Apple and/or decrypt the payment themselves locally to check if and why this data was not present, for troubleshooting purposes."

Hey everyone, hoping someone here has run into this before. I have a fully functional App Clip (com.didyoucatchit.app.Clip) linked to my main app (com.didyoucatchit.app). The Clip builds and runs perfectly, but I’m seeing issues trying to enable Apple Pay for it. When I try to link my Merchant ID under the “On Demand Install Capable” capability in the Apple Developer portal, I get this error: A relationship in the provided entity is not allowed for this request. The relationship 'undefined' can not be included in a 'bundleIdCapabilities' request. Here’s what I have already configured and confirmed: App Clip capabilities in Xcode include: Apple Pay Payment Processing Associated Domains (appclips:app.didyoucatchit.com) Provisioning profile includes: Apple Pay Payment Processing Associated Domains In-App Purchase On-Demand Install Capable Entitlements file for the Clip: <key>com.apple.developer.associated-domains</key> <array> <string>appclips:app.didyoucatchit.com</string> </array> <key>com.apple.developer.in-app-payments</key> <array> <string>merchant.com.didyoucatchit.app</string> </array> <key>com.apple.developer.parent-application-identifiers</key> <array> <string>$(AppIdentifierPrefix)com.didyoucatchit.app</string> </array> Merchant ID (merchant.com.didyoucatchit.app) is active and connected to Stripe Stripe Apple Pay configuration matches the same merchant ID and certificate Both provisioning profiles have been refreshed and downloaded However: The portal still throws the “relationship 'undefined'” error anytime I try to modify the Clip’s capabilities In testing, Apple Pay doesn’t show up as a payment option in the Clip (using Stripe’s Payment Element integration) Questions: Is this a known issue with the Developer portal when linking App Clips to merchant IDs? Is there a specific way to re-establish the parent–child relationship between the main app and the App Clip so the bundleIdCapabilities request includes the proper relationship JSON? Are there any additional configuration steps required when using Stripe for Apple Pay inside an App Clip? System Setup: Xcode: 16.2 (build 16C5032a) macOS: Sequoia 15.3.1 iOS: 18.5 (testing on physical device) Merchant ID: merchant.com.didyoucatchit.app Main App ID: com.didyoucatchit.app App Clip ID: com.didyoucatchit.app.Clip Any help or insight would be hugely appreciated Thanks in advance!

Hello, I am currently testing an Adyen integration with Sylius and need to verify Apple Pay with Cartes Bancaires in the sandbox environment. Could you please advise how Cartes Bancaires can be tested in Apple Pay Sandbox (e.g. cards details)? Thank you in advance for your guidance. Best regards, Grzegorz

please bear with me, i am NOT a developer. we have third party developer creating a banking app that is throwing an error when trying to provision MasterCard for Apple Pay. MasterCard says they do not see the request come in at all. our developer says the issue is between mastercard and apple - and asked us to reach out to Apple. Information provided from our developer: “Error code 2 is 'system cancelled' from the PKAddPaymentPassError enum. Basically, there is an issue between Apple and Mastercard (using the encrypted card info from...” Response from Mastercard Connect: Upon further research with the examples you shared we are not seeing any attempt that reached to MC

After opening the Apple Pay Popup and try to close the popup (without scanning the QR Code), the oncancel handler (accociated with the created session) doesn't fire. Meanwhile if the merchant scanned the QR code and the UI of the popup changed, then cancel the popup manually (using close (X) button), it fires the session.oncancel event handler. Here is applied setup: const { ApplePaySession } = window; if (!(ApplePaySession && ApplePaySession.canMakePayments())) { return new Error('Apple Pay Session is not available'); } const paymentCapabilities = await ApplePaySession.applePayCapabilities( applePaymentOptionsMetaData.merchantIdentifier, ); if (paymentCapabilities.paymentCredentialStatus === 'applePayUnsupported') { console.error('ApplePaySession is not supported.'); return; } const request = { "countryCode": "KW", "currencyCode": "KWD", "merchantCapabilities": [ "supports3DS" ], "supportedNetworks": [ "VISA", "MASTERCARD" ], "billingContact": { "phoneNumber": "201000000000", "emailAddress": "example@test.com", "givenName": "Ahmed", "familyName": "Sharkawy" }, "total": { "amount": "3.085", "label": "Merchant Testing" } } const session = new ApplePaySession(5, request); session.onvalidatemerchant = async event => { if (debug) { console.info('Creating merchant session and validating merchant session'); console.info('onvalidatemerchant event', event); } try { // Validation Merchant Request session.completeMerchantValidation(data); } catch (error: any) { session.completePayment({ status: ApplePaySession.STATUS_FAILURE }); } }; session.onpaymentauthorized = async (event) => { session.completePayment({ status: ApplePaySession.STATUS_SUCCESS }); }; // This doesn't fire session.oncancel = () => { console.info('EVENT: oncancel'); }; session.begin();

We are working with two types of wallet passes. Provisioning works successfully for one pass type via wallet extensions, but the same process is not functioning for the other. For the second pass type, we are able to generate the required data for pull provisioning and send it to Apple. Additionally, in-app push provisioning for this pass type completes without issue. We would appreciate guidance on how to further debug and resolve this provisioning problem.

We are developing a native iOS financial application called Tradu: Stocks, Forex, and CFDs (Apple ID: 6473443264), which embeds a WKWebView to render all user-facing logic. All user interactions—including authentication with MFA—occur inside this WKWebView. To access native functionality, we use postMessage() to communicate between the web and native layers. This approach has worked successfully for biometric authentication, for example. We are currently integrating Apple Pay In-App Provisioning and have a few questions regarding compliance with the documentation provided by our Issuer Host (Modulr). In the document titled Getting Started with Apple Pay: In-App Provisioning, Verification, Security, and Wallet Extensions (Version 4.0, February 2023), all examples are based on a fully native application. We’ve managed to integrate most of the In-App Provisioning flow via postMessage() up to the point of passing encryptedData to the Payment View. Apple Pay button inside WKWebView In Section 7: Frontend Overview, the user initiates the provisioning by tapping a native PKPaymentButton (SwiftUI example). In our case, this button is rendered inside the WKWebView, styled according to the Apple Style Guide. While the document references this approach as a “raw mark text supplement,” is this method acceptable and compliant with Apple’s UX and technical guidelines? MFA requirement before provisioning In Section 4: Security Guidelines, it is stated that the user must have passed MFA at least once before starting the provisioning flow. In our implementation, users must complete MFA on every login (including on recognized devices) before the provisioning UI becomes available. Even though this is not tied specifically to “unrecognized devices,” is our MFA requirement sufficient to satisfy Section 4.2? Summary: Is using a web-rendered Apple Pay button inside WKWebView (instead of a native PKPaymentButton) considered compliant? Is our MFA enforcement model (required on every login) aligned with the security requirements outlined in Section 4.2 of the Apple Pay In-App Provisioning documentation?

I am facing an issue with Apple Pay js while doing the integration we are using reference https://applepaydemo.apple.com/apple-pay-js-api In this I can generate the merchantSession correctly But when I pass that merchantSession in session.completeMerchantValidation(merchantValidation) as per documentation It is getting failed and also no appropriate error is being shown in the console

Hey everyone, I wanted to check if anyone else has faced extreme delays when requesting access to Apple Pay Wallet APIs. It was Oct 11 2024 a year ago since we first applied to enable in-app provisioning for virtual cards in our app and we made 1% progress. For context, we already got access from Google for Google Wallet—it was smooth, professional, and timely. But with Apple… it’s been nothing but an endless cycle of waiting. We followed every step, submitted everything correctly, and even called Apple Developer Support multiple times. Their response? "We've escalated it." Again and again. But there’s no real progress. We’re rerouted, ignored, and left in limbo. At this point, I don’t even know if anyone is actually reviewing these requests. If a business like ours—fully compliant and ready to integrate—can’t even get a response in 150 day, how is this process supposed to work? I’m posting this here because I can’t be the only one. Has anyone else faced this? If you finally got access, how did you do it? Because right now, it feels like Apple Pay in-app provisioning is an impossible goal. Hoping someone from Apple sees this and realizes how broken this process is. We’re just trying to innovate and offer Apple users a great experience—why is it so difficult? Looking forward to hearing from anyone in the community who can help, Thanks! 🙏

Hi, I’ve been trying to integrate Apple Pay, but for some reason, the payment button is not showing up. The project is built with Laravel 11 and Vue. I imported the script as follows: <script crossorigin crossorigin src="https://applepay.cdn-apple.com/jsapi/1.latest/apple-pay-sdk.js" ></script> Then I added the following the steps: <style> apple-pay-button {{ --apple-pay-button-width: --apple-pay-button-width: 150px;; --apple-pay-button-height: --apple-pay-button-height: 30px;; --apple-pay-button-border-radius: --apple-pay-button-border-radius: 3px;; --apple-pay-button-padding: --apple-pay-button-padding: 0px 0px;; --apple-pay-button-box-sizing: border-box; } </style> <apple-pay-button buttonstyle="black" type="plain" locale="en-US"></apple-pay-button> I followed all the steps from the official Apple Pay demo: https://applepaydemo.apple.com/ I also configured the Content Security Policy (CSP) to allow all necessary resources. However, when I test my integration, the button doesn’t appear. I’ve checked the console, but there are no errors. At the same time, I have my certificate imported into the Keychain, and I’ve completed the entire process of creating both the certificate and the private key. However, when I try to validate the session using the certificate and key with Apple’s API, I get an error: 400 The SSL certificate error https://apple-pay-gateway-cert.apple.com/paymentservices/

Hello everyone, I’m currently in the process of implementing Apple Pay on my company’s e-commerce website under a subscription model with recurring payments. I would appreciate some help in clarifying the following points: Is the applicationPrimaryAccountNumber the DPAN and the merchantTokenIdentifier the MPAN? If not, which fields represent each one or how do I recognise them? Is the onlinePaymentCryptogram used only for processing payments with the DPAN, or is it also involved when using the MPAN? Is the onlinePaymentCryptogram single-use or does it have an expiration time? Or is it reusable with no limits? According to Apple’s data policies, is it recommended for our servers to perform the payment token decryption (debundling), or should this only be handled by the payment gateway processor to stay compliant? Below is the payment request I’m using for testing, along with the decrypted payment token returned for a test card: Payment Request: { "countryCode": "US", "currencyCode": "USD", "merchantCapabilities": ["supports3DS", "supportsDebit", "supportsCredit"], "supportedNetworks": ["visa", "masterCard", "amex", "discover"], "requiredBillingContactFields": ["postalAddress", "name"], "lineItems": [ { "label": "Subtotal", "amount": "9" }, { "label": "Taxes", "amount": "1" } ], "total": { "label": "Demo (Card is not charged)", "amount": "10", "type": "final", "recurringPaymentIntervalUnit": "month" }, "recurringPaymentRequest": { "paymentDescription": "Recurring payment", "regularBilling": { "label": "Demo (Card is not charged)", "amount": "10", "type": "final", "paymentTiming": "recurring", "recurringPaymentIntervalUnit": "month" }, "managementURL": "${window.location.origin}/api/managePaymentMethod" } } Decrypted Payment Token: { "applicationPrimaryAccountNumber": "5204240494898922", "applicationExpirationDate": "280630", "currencyCode": "840", "transactionAmount": 0, "deviceManufacturerIdentifier": "050110030273", "paymentDataType": "3DSecure", "paymentData": { "onlinePaymentCryptogram": "MCt5xR+VnQAAAAM/8mUjAAADFIA=" }, "merchantTokenIdentifier": "DM4MMC1US000000042e438d170774669844e732a41c28e97", "merchantTokenMetadata": { "cardMetadata": { "longDescription": "Test Bank for MasterCard MTF", "cardCountry": "US", "shortDescription": "Test Bank 2", "fpanSuffix": "0049" }, "cardArt": [ { "url": "https://nc-crt-smp-device-asset.apple.com:443/broker/v1/assets/174ce63257704d93b00aff8aa09ec0d5", "name": "cardBackgroundCombined@2x.png", "type": "image/png" } ] } } Thanks in advance for your help and guidance.

A team observed lots of timeouts from the Apple Pay session endpoint: https://apple-pay-gateway-cert.apple.com/paymentservices/paymentSession Is it expected or some kind of an implementation issue from the caller side? Thanks!

Hi , This is regarding the ApplePayRecurringPayment Request and Apple Pay on Web functionality. Does Apple Pay on web providing functionality that collects payments from the stored credit card issuer bank (or) it only provides secured wallet functionality that provides a token which then has to be utilized to send a seperate payment request through a third party payment gateway to collect the payments from the credit card issuer bank. thanks

We have an app that uses the pass-presentation-suppression entitlement and calls requestAutomaticPassPresentationSuppression to prevent the Wallet app from being presented when the device is displaying a barcode to a barcode/nfc reader. This works as expected for users of the standard Apple Wallet app. However, it does not prevent third-party wallet apps from being launched, which hides the barcode and prevents it from being scanned properly. What options do I have to prevent third-party wallet apps from launching or interfering while our app is actively presenting a barcode?

Hi all, I’m running into a confusing issue with Apple Pay domain verification. Apple’s documentation says to host the verification file at: https://yourdomain.com/.well-known/apple-developer-merchantid-domain-association And the portal itself seems to expect the file to be served with .txt extension during verification. My first verification passed, but subsequent checks are failing — and I’m wondering if this mismatch is the cause. Should I Keep the .txt and configure my server to serve it at both paths? Would appreciate any insights or official clarification. Thanks!