The issue described here in this stack overflow conversation is still an issue today when it comes to the read back of the last 4 digits in the phone numbers for North American numbers as minus. Is there a solution other than overriding the accessibleLabel property?

I am testing the accessibility feature available in the Settings app called "Speak Screen". The help text in the Setting app states that swiping down with two fingers will cause the screen content to be spoken. However, I've been unable to get this feature to work. Every time I try the double finger swipe down, it behaves the same as the single finger swipe down gesture. Usually this manifests as making scroll views bounce. I've tried toggling the feature on and off, turning off Reachability, and rebooting my phone, but I can't get the speak screen gesture to work. If I access the speak screen feature from the "Speech Controller" button, then the screens content is spoken, as expected, so I know the feature is enabled. It's just the gesture that doesn't work. Is there something else I need to do to get this gesture to work? I don't want to tell my users to turn this feature on if I can't verify that the gesture will work with my app.

I have a TextField and entered for example "sg?!". At the TextField I set the modifier speechAlwaysIncludesPunctuation(). But when I activate VoiceOver the content of TextField is reading. The special characters don't read out. How can I fix this?

Hello I tried implementing the ASAM for macOS as per apple guidelines with configuration profile mentioned here but didn't had any success. Then Apple suggested to use requestGuidedAccessSession in macOS but that is only supported in macOS Catalyst but that also didn't work with valid config profiles too. Did anyone get success with ASAM mode without assessment entitltlement?

I am registering my startup for an Apple Developer Account so that we can put our app on the App Store. I do not want use my personal Apple ID's payment to pay the $99 annual fee. How can I change the payment method so that I can continue with my enrollment?

I'm encountering an issue related to BLE device discovery on iOS. I have a BLE peripheral device that I initially connected to using an iOS device. After this connection, the BLE device's advertised name was programmatically changed by the peripheral. Now, when I try to scan for this device using other iOS devices, it does not appear in the scan results in most apps — including nRF Connect and our own custom BLE app that uses CoreBluetooth. A few observations: The device is definitely powered on and advertising (confirmed via Android). The name change is reflected correctly on Android and on the iOS device that originally connected to it. Other iOS devices no longer see the device in their scan list.

Should I allow the CIJSULAgent to find devices on local network?

I have a UITextField in my application for entering a state. If I tap on it, a UIPickerView pops up and let's the user select a state (but they can still type too). The issue relates to Full Keyboard Access. If we select the UITextField using an external keyboard, the UIPickerView appears, but in order to get to it the user has to tab through the whole view controller to get to the UIPickerView at the end. What would be nice is to a) move focus directly to the UIPickerView (have it highlighted in blue and scrollable right away with keyboard) or b) make the UIPickerView the next view that's accessible when tabbing over or using the arrow keys. I've tried using: UIAccessibility notifications (both .screenChanged and .layoutChanged, with and without a delay). This ended up only announcing the view, but didn't help with full keyboard access. Making the UIPickerView a first responder when it appears. Attempting to change the accessibilityElements order (but with so many views and views within views, this isn't really a viable option either). Pressing tab + -> (tab and right arrow button) will quickly take the user to the end of the chain of accessibility elements, in other words, to the UIPickerView. But there has to be a cleaner way of just automatically setting the focus to the UIPickerView or making it the next element by pressing the arrow key.

I’m trying to understand the best practice for assigning accessibilityTraits to a UITableViewCell that users can select from a list of options. In Apple’s first-party apps like Settings, I’ve noticed an inconsistent approach—some cells use the Button trait, while others simply announce the label along with the Selected trait when applicable, without any additional role like Button or Adjustable. So my question is: What is the most appropriate accessibility trait to use for a selectable table view cell that updates a selection (like a settings option)? Is using .button the right approach, or should we rely solely on .selected? Is there any user experience guideline from Apple that recommends one over the other? Would love to hear how others handle this for clarity and consistency in VoiceOver behavior.

Hello, I’m in the process of enrolling my business (Carzo Rent A Car, Prishtine, Kosovo) in the Apple Developer Program, but I have been waiting for my D-U-N-S number to be issued. I submitted the request to Dun & Bradstreet on July 28, 2025 (Case #9142648) and have only received a system-generated email with a tracking ID (#9086421). There has been no further update. My questions are: Is there a way for Apple to expedite or provisionally approve my enrollment while the D-U-N-S number is pending? How long does Apple typically wait for D&B updates before the enrollment is affected? Are there any alternative steps I can take to avoid further delays? Thank you for your guidance.

I have subscribed to the developer program, but it’s already been a day and it still shows “is not enrolled in the Apple Developer Program.”

The Text view seems to automatically prevent orphaned words on screen, but barring exceptional circumstances such as the font size being too large. I couldn't find any documentation on this behaviour, how to configure, and would also be very interested in how it's implemented? Thanks!

The issue is, I cannot auto acquire bluetooth keyboard focus in PHPickerViewController after enabling 'Full Keyboard Access' in my IPhone 14 with iOS version 18.3.1. The keyboard focus in PHPickerViewController will show, however, after I tapped on the blank space of the PHPickerViewController. How to make the focus on at the first place then? I'm using UINavigationController and calling setNavigationBarHidden(true, animated: false). Then I use this controller to present PHPickerViewController using some configuration setup below. self.configuration = PHPickerConfiguration() configuration.filter = .any(of: filters) configuration.selectionLimit = selectionLimit if #available(iOS 15.0, *), allowOrdering { configuration.selection = .ordered } configuration.preferredAssetRepresentationMode = .current Finally I set the delegate to PHPickerViewController and call UINavigationController.present(PHPickerViewController, animated: true) to render it. Also I notice animation showing in first video then disappear.

We have an electron app developed for Mac. We would like to restore the user data previously saved in downloads once user installs the app from store and first launch. But MAS has restrictions with ""com.apple.security.files.downloads.read-write". We have enabled the user access in Entitlement files and request user permission before access What options can be user to auto restore the data from downlodas?

iOSアプリでNEAppPushSessionを使い、NEAppPushDelegateの通知を受けてCallKitの着信画面を表示する実装をしていますが、以下の問題に直面しています。 8/13 ログにて下記のエラーが頻発しました。 通知の受け取りテストを約120回してその間ずっとこのエラーが出ていました。 エラー 2025-08-14 11:27:06.793073 +0900 nesessionmanager NESMAppPushSession[SimplePushDefaultConfiguration:7B7218F3-94B5-4AE5-9B9E-94E176694D02] failed to report incoming call to CallKit, error: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service named com.apple.callkit.networkextension.messagecontrollerhost was invalidated from this process." UserInfo={NSDebugDescription=The connection to service named com.apple.callkit.networkextension.messagecontrollerhost was invalidated from this process.} このエラーログが頻発した後、callkitの通知画面が表示されなくなりました。 ですがどうやら通知の監視は開始しているようです。 15時間後の8/14 時間をあけたからか、再度通知が来るようになりました。 ですが再度通知の受け取りテストを行った時に同じエラーログが出ました。 再度通知テストを約120回程行ったら、このエラーログが頻発した後、callkitの通知画面が表示されなくなりました。 ですがどうやら今回も通知の監視は開始しているようです。 15時間後の8/15 今日は15時間かけても通知を取得できませんでした。 ですが同じく通知の監視は開始していそうです。 iPhoneの再起動、Xcodeのクリーンアップ、アンインストールして再インストールなどしても通知は来ないままでした。 また、不思議なことに通知が来ない事象が起きた端末以外でも同じように通知を取得することができません。 他の通知は受け取ることができますが独自の通知であるNEAppPushManagerだけ通知を取得することができません。 質問です。 再度通知を出すためには何をすれば良いでしょうか。 この事象は4099エラーを出しすぎたことにより発生する障害なのでしょうか。 4099エラーを出ている原因は何でしょうか。

Since UITextView does not support the zoom function, the zoom function of UITextView with addSubview is used in UIScrollView. However, when I use the link here, the text behind it is missing. Ex) https://appstoreconnect.apple.com/login\nApple Developer Login -> The text “Apple Developer Login” does not appear. If anyone has experienced the same problem as me or knows a solution, please leave a comment. Note) It is working normally in iOS16, but the text behind the link disappears in iOS18. The text is not visible, but you can copy it and paste it to retrieve the missing text.

Triple tap for screenshot->notification->triple tap detected becomes a part of the screenshot and obscures the top part of screenshot. Thanks

Please refer to Feedback report: FB19701007 The Personal Voice file created in English changes to either Spanish or Chinese and no longer works properly. This has been happening since Beta 1 of iOS/iPadOS 26. I have been unable to pinpoint what causes this to occur. Possibly downloading foreign voices to a device or using different voices via AVSpeechSynthesizer. I run an app in Xcode on my device that prints to the console info about the installed voices. Initially after creation here is the output: Voice Identifier: com.apple.speech.personalvoice.16173F8D-DFB0-4024-98CC-69D965FD96A4 Language: en-US Then I hear a Spanish accent and find this: Voice Identifier: com.apple.speech.personalvoice.16173F8D-DFB0-4024-98CC-69D965FD96A4 Language: es-MX Currently it isn't working and here is the output: Voice Identifier: com.apple.speech.personalvoice.16173F8D-DFB0-4024-98CC-69D965FD96A4 Language: zh-CN Note that the voice file on all three above is the same. No matter what the user does, the created voice file should never be able to change languages. On my test devices I reset them all by erasing all content and settings and creating a new English Personal Voice and the issue persists. A side issue is the toggle share across devices doesn't remain off if turned off. I tried to not share to see if that could be the cause, but the toggle turns on automatically. It won’t remain off.

I remember that Vision Pro's dwell control could previously be set to 0.1 seconds, but now it can't. Is there a way to adjust it?

I’m currently focused on an element at the bottom of the screen. What is the proper way to quickly navigate to the top element? By default, there’s a four-finger single tap to move to the first element, but should I use the Rotor action instead to focus on the element I need? For example, in the Contacts app while adding a new contact, if I enter a value in a field at the bottom, there’s no quick way to directly save the contact. I have to manually navigate all the way to the top to tap the Done button, which feels a bit inconvenient. Is there a better way to handle this using VoiceOver?