i have a swift app,in latest version , i change some class module . in old version used archivedData(withRootObject rootObject: Any) to save class model. in lastest version crashed -[NSKeyedUnarchiver decodeObjectForKey:]: cannot decode object of class

Merhaba , bir apple mağaza kurulumu yaptık fakat yaptığımız ödemenin faturası henüz gelmedi. Faturaya nereden ulaşacağım hakkında bilgi verebilir misiniz?

Hello Albert! I am experiencing some strange bugs around DeviceActivityEvents (part of the DeviceActivity framework) on iOS 26 / iOS 26.1 / iOS 26.2 beta: When creating a DeviceActivityEvent we can assign a threshold and applicationTokens. The idea is, that after the user has spent said threshold on said apps, eventDidReachThreshold() is called. The property includesPastActivity is set to false. On iOS 26 however, it happens (quite reliably after updating to a new beta seed) quite often that eventDidReachThreshold() is called immediately (after a couple of seconds) instead of waiting for the threshold to be met. Is anyone else seeing similar issues on iOS 26 / iOS 26.1 / iOS 26.2 beta? Only workaround I have found is to ask users to revoke and re-grant Screen Time permissions. This only holds for about two weeks though or at most until the next iOS 26 beta update is installed, so it is not a permanent solution unfortunately. Feedback (incl. sysdiagnoses and sample project) is filed under: FB18061981 FB18927456 One of our users has filed their own feedback request as well: FB20817853 Thanks a lot for any help on this!

there is no possibility to sett the allow mobile Data switch I have the latest update but still does not work and I realised it when I went to another country and I could not sett my Mobile data and when I came back still I could not.

I have a product for designing particle emitters, which I suspect may be of limited interest to people with limited vision. I'd still like to ensure I'm doing a good job with VoiceOver mode. There's a related, simplified sample online, if you want to look at the code As you can see from the picture below, a large part of the interface mimics Xcode's particle editor, with many value entry controls that combine up/down buttons with a tappable label. Tapping the label goes into edit mode. Apart from changing how labels are stepped through in voiceover in my app, how should I handle these stepper buttons? Is this a good place to use a Custom Rotor?

I have subscribed to the developer program, but it’s already been a day and it still shows “is not enrolled in the Apple Developer Program.”

Issue: When using the shortcut Command + Delete to clear a line of text, the next character I type in Thai unexpectedly appears as an English character, even though the input source is still set to Thai. After that, subsequent characters return to Thai as expected. Details: Affected apps: Notes, Messages, and some other native apps Not affected: Browser text fields (Safari, Chrome, etc.) Does not occur when using Option + Delete or just Delete macOS [insert beta version + build number] Mac model: [insert model] Input sources: Thai – Kedmanee, English – U.S. Steps to reproduce: Open Notes (or Messages). Switch to Thai input. Type a few Thai words. Press Command + Delete. Type again — the first character shows up in English. Expected: First character should remain in Thai, consistent with the active input source. Actual: First character shows as English, then input switches back to Thai.

The Text view seems to automatically prevent orphaned words on screen, but barring exceptional circumstances such as the font size being too large. I couldn't find any documentation on this behaviour, how to configure, and would also be very interested in how it's implemented? Thanks!

i would like to ask what are the new touchpad shortcuts in the latest os for ipad using a trackpad. The three fingers swipe to the right and left seemed to be removed. Thank you

I’m developing an iOS app, and I’ve noticed that when the user enables Accessibility → Display & Text Size → Color Filters → Grayscale, my app icon loses a lot of visual contrast. The original colored version looks fine, but in grayscale it appears “flat” and harder to distinguish, unlike a pure black-and-white design. What I want to achieve: Ensure the app icon remains visually clear and high-contrast even when iOS renders it in grayscale. Ideally, provide an alternate “high-contrast” app icon version when grayscale mode is enabled. What I’ve tried: Increased color contrast in the original icon design. Added outlines and stronger shapes. Tested with grayscale filters in design tools. Researched Asset Catalog and alternate icons, but found no documented API to detect or respond to grayscale mode. Questions: Is there any API in iOS that allows detecting when the system is in grayscale mode so that I can programmatically switch to an alternate app icon? If not, are there Apple-recommended best practices for designing app icons that still look clear in grayscale? Are there any accessibility guidelines specifically addressing icon design for grayscale or color-blind modes? Additional info: iOS version tested: iOS 17.5 Development in Swift + SwiftUI, using Asset Catalog for icons. I am aware that iOS supports alternate icons via setAlternateIconName, but I haven’t found a trigger for grayscale mode.

Hello everyone, Our community dues payment app only facilitates real-world maintenance-dues payments directly to property managers’ bank accounts. However, during testing it was likely flagged by the AI-driven review system for a metadata criterion and rejected under Guideline 3.1.1 (“Paid digital content must use IAP”). Meanwhile, hundreds of similar apps remain live on the App Store using the exact same model: The app is completely free No digital content or subscriptions are sold Dues payments are made via bank transfer or credit card directly to the manager Has anyone else encountered this? How did you overcome the metadata check in the AI-driven review process? Thanks!

On recent versions of macOS, when a window is being shared (via the system screen-capture APIs), the OS sometimes shows a small "shared window" badge in the title bar. I’ve noticed that this indicator is not consistent: For some windows, the badge reliably appears when they are being shared. For other windows, the badge never appears, even though the window is actively shared. In particular, windows that use a standard system title bar seem to show the indicator more often, while windows with custom-drawn or non-standard chrome do not. My questions are: What are the exact conditions under which macOS decides to draw the “shared window” indicator in a window’s title bar? Is this strictly tied to certain NSWindow styles or masks (e.g. titled vs borderless)? Is there any API or flag I can use to detect programmatically whether a given window will display this system indicator when shared?

Hi Apple Developer Community, I'm developing an eye-tracking application using ARKit's ARFaceTrackingConfiguration and ARFaceAnchor.blendShapes for gaze detection using Xcode. I'm experiencing several calibration and accuracy issues and would appreciate insights from the community. Current Implementation Using ARFaceAnchor.blendShapes (.eyeLookUpLeft, .eyeLookDownLeft, .eyeLookInLeft, .eyeLookOutLeft, etc.) Implementing custom sensitivity curves and smoothing algorithms Applying baseline correction and coordinate mapping Using quadratic regression for calibration point mapping Issues I'm Facing 1. Calibration Mismatch Red dot position doesn't align with where I'm actually looking Significant offset between intended gaze point and actual cursor position Calibration seems to drift or become inaccurate over time 2. Extreme Eye Movement Requirements Need to make exaggerated eye movements to reach screen edges/corners Natural eye movements don't translate to proportional cursor movement Difficulty reaching certain screen regions even with calibration 3. Sensitivity and Stability Issues Cursor jitters or jumps around when looking at center Too much sensitivity to micro-movements Inconsistent behavior between calibration and normal operation 4. I also noticed that tracking on calibration screen as well as tracking on reading screen works better as expected when head movement is there, but I do not want much head movement. I want tracking with normal eye movement while reading an Ebook. Primary Question: Word-Level Eye Tracking Feasibility Is word-level eye tracking (tracking gaze as users read through individual words in an ebook) technically feasible with current iPhone/iPad hardware? I understand that Apple's built-in eye tracking is primarily an accessibility feature for UI navigation. However, I'm wondering if the TrueDepth camera and ARKit's eye tracking capabilities are sufficient for: Tracking natural reading patterns (left-to-right, line-by-line progression) Detecting which specific words a user is looking at Maintaining accuracy for sustained reading sessions (15-30 minutes) Working reliably across different users and lighting conditions Questions for the Community Hardware Limitations: Are iPhone/iPad TrueDepth cameras capable of the precision needed for word-level tracking, or is this beyond current hardware capabilities? Calibration Best Practices: What calibration strategies have worked best for accurate gaze mapping? How many calibration points are typically needed? Reading-Specific Challenges: Are there particular challenges when tracking reading behavior vs. general gaze tracking? Alternative Approaches: Are there better approaches than ARKit blend shapes for this use case? Current Setup Devices: iPhone 14 Pro iOS Version: iOS 18.3 ARKit Version: Latest available Any insights, experiences, or technical guidance would be greatly appreciated. I'm particularly interested in hearing from developers who have worked on similar eye tracking applications or have experience with the limitations and capabilities of ARKit's eye tracking features. Thank you for your time and expertise!

Has the NEHotspotNetwork framework removed the fetchAvailableNetworksWithCompletionHandler API? xcode version: 16.2 ios sdk: 18.2 I want to get wifi's list by NEHotspotNetwork framework, but i didn't find any useful infomation about it

Hi everybody, I'm trying to build a QR-Code Scanner and Generator App for IOS. Whenever I try to implement the camera the app crashes with this comment: This app has crashed because it attempted to access privacy-sensitive data without a usage description. The app's Info.plist must contain an NSCameraUsageDescription key with a string value explaining to the user how the app uses this data. I tried to reduce the app to the minimum of nothing but camera with the same result. Any ideas? Tank you and best Regards Horst Schippers

I need to direct text-to-speech generated audio from my app simultaneously to a bluetooth speaker device AND to the internal iPad speaker. The app uses AVSpeechSynthesizer and several third party speech engines. How best to do this? I noticed the outputChannels property on AVSpeechSynthesizer...are there any examples of how to use this?

It’s very annoying but on my iPhone 12 Pro I keep getting the accessibility app with the microphone on and it keeps opening the app by itself and it’s a blank screen and every time I close it it just reopens. I don’t know why it keeps doing this, but it drives me crazy. Does anyone know what else to do? I also have the beta iOS 26 but it’s been doing this even with the past update.

Hi everyone, My team and I are developing an accessibility-focused VisionOS app (MindTap) as part of a university project, aiming to support individuals with Locked-In Syndrome using Brain-Computer Interface (BCI) signals to trigger interactions (e.g., tapping) within the Apple Vision Pro environment. Problem 1: Simulating Eye Tracking in Simulator We are testing onHover with Send pointer to the device under I/O > Input in the simulator, and while it mostly works (a bit laggy), we found that onHover won't function on the actual Vision Pro hardware. From what I understand, we should be using FocusState for proper gaze interaction, but testing this requires the physical device. Is there any workaround or official Apple-recommended way to simulate Focus-based gaze detection without a real Vision Pro? Problem 2: WebSocket-triggered "Click" doesn't work outside the app We successfully use WebSocket to send a custom signal (a "1" from the brain signal device) to trigger an action inside our app. However, when the user opens a third-party app like Apple News, the WebSocket-triggered "click" no longer works. We suspect this is due to sandbox restrictions or lack of system-level permissions. Is it possible in anyway to: Trigger interaction events outside the app using custom input (like BCI via Websocket)? Access system-wide click/tap simulation APIs from within VisionOS apps Integrate this with accessibility services (like Voice Control or AssistiveTouch) We'd appreciate any official guidance or tips from others building similar accessibility apps with alternative input methods in VisionOS. Thanks in advance for any insight you can provide!

I am encountering the following issue while working with app group preferences in my Safari web extension: Couldn't read values in CFPrefsPlistSource<0x3034e7f80> (Domain: [MyAppGroup], User: kCFPreferencesAnyUser, ByHost: Yes, Container: (null), Contents Need Refresh: Yes): Using kCFPreferencesAnyUser with a container is only allowed for System Containers, detaching from cfprefsd. I am trying to read/write shared preferences using UserDefaults with an App Group but keep running into this error. Any guidance on how to resolve this would be greatly appreciated! Has anyone encountered this before? How can I properly configure my app group preferences to avoid this issue?

We are developing Apple AI for foreign markets and adapting it for iPhone models 17 and above. When the system language and Siri language are not the same—for example, if the system is in English and Siri is in Chinese—it can cause a situation where Apple AI cannot be used. So, may I ask if there are any other reasons that could cause Apple AI to be unavailable within the app, even if it has been enabled?