Hey all — hoping someone here has dealt with this before. I’m testing an iOS app via TestFlight, and when I originally got access, I didn’t have an iPhone. So I signed in with my Apple ID on my girlfriend’s iPhone and used TestFlight there. Everything worked fine. Now I finally have my own iPhone (iPhone 16), downloaded TestFlight, signed in with the same Apple ID, and had the developer resend the invite. But when I tap "Open in TestFlight" from the invite email, I get this error: “Couldn’t load app because your Apple account has already been associated to this app.” The dev tried removing me as a tester and re-adding me, I’ve deleted TestFlight from both phones, rebooted, reinstalled, waited in between — still no luck. Even tried opening the invite link in Safari instead of Mail. Is there any way to get Apple to fully reset the association with the old device so I can use TestFlight on my new iPhone? Or do I really need to make a new Apple ID just to get around this? Any help would be huge — thanks!

home button cannot be pressed. attempting to enable developer mode says "press home to continue" the usual accessibility switch "assistive touch" that is shown on iOS is not available on this screen so dev mode cannot be enabled this is an accessibility issue

I am working on capturing 48MP images using the iPhone 16 Pro Max with the Ultra-wide camera. I’ve updated the code to capture the maximum supported dimensions with the following snippet: if #available(iOS 16.0, *) { photoOutput.maxPhotoDimensions = device.activeFormat.supportedMaxPhotoDimensions.last! photoSettings.maxPhotoDimensions = .init(width: 5712, height: 4284) } However, I’m still not getting the expected results. My goal is to capture 48MP images, and I want to confirm if the Ultra-wide camera supports this resolution or if I’m missing any other configuration. Any guidance would be appreciated!

Dear Team, We are stuck in membership enrollment process at the purchase stage. We enter the payment details, get the message that our purchase will be completed in 48 hours, but after some time, it reverts back to the same stage of purchase your membership without any error or information. This has happened for 3-4 times till now. Kindly let us know how to resolve this issue and move forward with the enrollment process. Thanks.

How to access application’s Trust Store to include the new server certificate

I have more than 1000 notes classified in parent/child folders up to 5 levels. From the 5th level of files I can no longer share the note. The note is not shared. It is that of the parent file that is shared. Thank you very much Good to you Christophe

Hi Guys, I've been trying for two weeks to sign up for the Apple Developer program. I've tried to pay the $99 but it didnt go off my account. Now my accoun tis in pending mode and there is no response from apple support. I've ogged about 10 tickets over the past two weeks. Any advice here? I am getting desperate.

Hey, We've run into an issue where WKWebView contents are not always available for VoiceOver users. It seems to occur when WKWebView contents are loaded asynchronously. I have a sample project where this can be reproduced and a video showing the issue. See FB21257352 The only solution we currently see is forcing an update continuously using UIAccessibility.post(notification: .layoutChanged, argument: nil), but this is ofc a last resort as it may have other unintended side effects.

My team has a robust digital accessibility program and processes for WCAG conformance in our apps. Because of this, there are definitely accessibility defects that get caught and addressed in order of impact and business priority like any other bug. Obviously we want to aim for 100% accessibility for our users, but it's a continual work in progress as new enhancements or changes are released. I'm stuck on the appropriate measurement to indicate support. If we have 50 common tasks and the most central 10 tasks are solid but some supporting (but also common) tasks have a contrast fail or accessibleLabel missing, does that make the whole app not supporting the feature? If "completing the task" is the rubric there are a whole range of interpretations for that. In a complex app, I anticipate that a group like ours will have strong support for many of the Accessibility Nutrition Labels accessibility features across tasks and devices, but realistically never be 100% free of defects for a given Apple Accessibility feature, even among core tasks. As I consider the next steps for Nutrition Labels, I do not see anything in the documentation that gives a sort of baseline or measurement for inclusion. We plan to test all steps to complete a task, and log defects accordingly with an assigned timeline for fixing them (as would be true for functional defects).

I want to understand which component types are intended to have an associated hint text, haptic feedback, or earcon associated with it for VoiceOver screen reader users. Is there a list somewhere or a HIG guideline for which transition types should have a sound? Some transitions in Apple apps generally include different beep sounds, such as opening a new screen screen dimming when a VoiceOver user swipes from the header / navbar to the body a scraping sound when swiping up or down a page. the beginning or end of the body section in Calculator when swiping from one row to the next. opening a pop up menu I would also appreciate any direction on what code strings are associated with these sounds and how custom components can capture these sounds or haptics or hints where it is expected? On the other hand, I don't want to get that info and then dictate that every component needs a specific beep type since these sounds appear to be used for specific purposes.

i have a swift app,in latest version , i change some class module . in old version used archivedData(withRootObject rootObject: Any) to save class model. in lastest version crashed -[NSKeyedUnarchiver decodeObjectForKey:]: cannot decode object of class

I am facing issue of back camera in my iphone 14 plus it is showing the black screen and my iphone is manufacture between april 2023 to april 2024 but its still not eligible for apple program my phone is also getting same issue why its not eligible for it

I have added multipe bank accounts in my apple connect store but thier status is Not in Use. Whats wrong here.

写了个自己用的app，在自己手机上测试中，隔一周左右就打不开了，显示不再可用。 ps.没花钱买开发者账号，app也不打算发布。

Yesterday I installed iOS 26 on my iPhone as a beta tester. At first there was no problem, but during the afternoon I noticed that neither FaceTime nor IMessage worked... I tried to go through the settings as described by Apple Support, but my phone number would not activate. Sometimes I was even asked to activate iCloud. I always get a REG-RESP message. Does anyone have any ideas what the problem could be?

Hey everyone I'm working on a health app that's heavily focused on HRV tracking and analysis, and I'm trying to figure out what's actually possible with AirPods Pro 3 from a developer standpoint. The hardware clearly has a much better heart rate sensor than the previous generation, but I'm hitting some walls when it comes to actually accessing the data I need. So here's the situation I'm dealing with: When I query HealthKit for HRV samples, I'm not seeing anything coming from AirPods Pro 3. The device is obviously capable of tracking heart rate continuously during workouts and listening sessions, and from what I've read about the hardware, it should theoretically be able to capture the inter-beat intervals needed for HRV calculation. But either that data isn't being processed on-device, or it's just not being made available through the standard HealthKit data types that third-party apps can access. What I'm really after is either direct HRV metrics (like SDNN, which Apple Watch already provides through HKQuantityTypeIdentifierHeartRateVariabilitySDNN) or even better, access to the raw R-R interval data. With R-R intervals, I could calculate RMSSD, pNN50, and other time-domain and frequency-domain HRV metrics that are super valuable for tracking recovery, autonomic nervous system balance, and stress levels. This would be especially useful since a lot of users wear AirPods during activities when they're not wearing their Apple Watch. Has anyone managed to find a way to pull this data from AirPods Pro 3? Are there any private frameworks or entitlements I should be looking into? Or is this just fundamentally not exposed to developers at the OS level right now? I've gone through the HealthKit documentation pretty thoroughly and haven't found anything that specifically addresses this, but I'm wondering if I'm missing something or if there are any known workarounds. I'm also curious if anyone has heard anything from Apple about future plans to expose this data. It seems like a missed opportunity given how capable the hardware is and how much value developers could provide with access to this physiological data. Would love to hear if anyone else is working on similar features or has insights into the technical limitations here.

Haptic or Sound queue to allow for the accessibility of the blind (sound) and deaf population (haptic) for even knowing when location services and the camera were last used? Also, the grey notification rather than the purple notification for location services should appear for the full 24 hours after an application has used the app, if the correct description is within the "copy" of Settings The green light lets them know that the application has changed to the camera and fade out orange light both could even have subtle simply click sounds, like a shutter, big haptic, softer sound, but editable in Settings, of course

before I start this could just be me and handful of people but I like to reorganize my phone screen to my needs based on what’s going on in life. I was jaut thinking it would be easier if u could get rid of all the folders at once then reorganize or something easier than this long extensive process it is now.

I'm facing a bizarre issue with the Apple's Accessibility APIs. I am registering an AXObserver that listens for, among other things, the kAXSelectedTextChangedNotification. For many new users, the kAXSelectTextChangedNotification is not triggered, even though they have enabled Accessibility permission for the app. Other notifications are getting through (kAXWindowMovedNotification, kAXWindowResizedNotification, kAXValueChangedNotification etc - full list here), just not the kAXSelectedTextChangedNotification! We've found that we can reproduce the error by removing accessibility permission for the app and rebooting our computers. After restarting and reenabling accessibility permissions, the kAXSelectedTextChangedNotification was not received, even though other notifications were fine. Strangely, the issue can be resolved by launching Apple's Accessibility Inspector app on an impacted computer. Once the Accessibility Inspector is loaded, the kAXSelectedTextChangedNotifications start coming through as expected. This implies to me that either: We are missing some needed setup when starting the observers. Accessibility Inspector gets it right, thus ‘starting’ the system properly. Accessibility Inspector is using some Apple private APIs that we don’t have access to. Things I’ve tried: I've tried subscribing the AXSelectedTextChangedNotification to different AXUIElements, including the SystemWide element, the Application element, and children elements from the AXApplication. None of these received the kAXSelectedTextChangedNotification, until Accessibility Inspector is booted up. No surprises here, as Apple's documentation confirms that you should add the notification to the root Application AXUIElement if you want to receive notifications for all its children. I had a theory that the issue might be due to my code calling AXUIElementCreateApplication multiple times, possibly creating multiple "Applications" in Apple's Accessibility implementation. If that’s the case, the notifications might be sent to the wrong application AXUIElement. However, refactoring my code to only call AXUIElementCreateApplication once didn't resolve the issue. I thought the issue may be caused by subscribing the AXSelectedTextChangedNotification on the high-level application element (at odds with Apple's documentation). I've tried traversing the child AXUIElements until we find one with the kAXSelectedTextAttribute and then subscribing to that. This did not resolve the issue. I don’t think it's the correct path to continue exploring, given that the notifications are received correctly after AccessibilityInspector is launched. There is one exception to the above: if I add the kSelectedTextChangedNotification listener to a specific text field AXUIElement, I do receive the notification on that text field. However, this is not practical; I need a solution that will work for all text fields within an app. The Accessibility Inspector appears to be doing something that causes the selected-text-changed notifications to be correctly passed up to the high-level application AXUIElement. Another thought is that I could traverse the entire Accessibility hierarchy and add listeners to every subview that has the kAXSelectedTextAttribute. However, I don’t like this long-term solution. It will be slow and incomplete: new elements get added and removed frequently. I just want the kAXSelectedTextChangedNotification to be received by the high-level Application AXUIElement, which the documentation suggests it should be. I also have evidence that this can work, since notifications start coming through after Accessibility Inspector is launched. It’s just a matter of discovering how to replicate whatever Accessibility Inspector is doing. An interesting wrinkle: I implemented the 'traverse' strategy above, but was surprised by how few elements were in the hierarchy. Most apps only go down ~2-3 levels, which didn't seem right to me. Perhaps the Accessibility tree isn't fully initialized? I tried adding a 5-second delay to allow more initialization time, but it didn't change anything. Does anyone have any ideas? Here's our file.

ar quicklook suddenly is grayed out on iphone 15 pro, I bought the phone new recently ot was working great, 2 days ago updated to ios 18.1.4, ar mode kept opening but i started getting a move iphone over surface message and the object wouldn’t detect surfaces correctly, updated to ios 18.5, now when i open quicklook modesl ar is completely greyed out, can someone help me fix or detect the issue thank you